STTH200W03TV1 Turbo 2 ultrafast high voltage rectifier Datasheet production data Features ■ Ultrafast switching ■ Low reverse recovery current ■ Low thermal resistance ■ Reduces switching and conduction losses ■ Insulated package – Insulating voltage = 2500 V rms – Capacitance = 45 pF ■ A1 K1 A2 K2 A1 K1 Complies with UL standards (File ref: E81734) A2 Description K2 ISOTOP STTH200W03TV1 The STTH200W03TV1, which uses ST Turbo 2, 300 V technology, is especially suited to be used for DC/AC and DC/AC converters in primary stage of MIG/MMA/TIG welding machine. Packaged in ISOTOP, this device offers high power integration for all welding machines and industrial equipment. October 2012 This is information on a product in full production. Table 1. Doc ID 023614 Rev 1 Device summary Symbol Value IF(AV) 2 x 100 A VRRM 300 V Tj (max) 150 °C VF (typ) 0.95 V trr (typ) 40 ns 1/9 www.st.com 9 Characteristics STTH200W03TV1 1 Characteristics Table 2. Absolute ratings (limiting values at Tj = 25 °C, unless otherwise specified, per diode) Symbol Parameter Value Unit 300 V VRRM Repetitive peak reverse voltage IF(RMS) Forward rms current Per diode 145 A IF(peak) Average forward current, = 0.2 Per diode Tc = 105 °C 200 A IFSM Surge non repetitive forward current tp = 10 ms Sinusoidal 800 A Tstg Storage temperature range -65 to + 150 °C 150 °C Value Unit Tj Table 3. Maximum operating junction temperature Thermal parameters Symbol Parameter Rth(j-c) Junction to case Rth(c) Coupling Per diode 0.7 Total 0.4 °C/W 0.1 °C/W When the two diodes 1 and 2 are used simultaneously: Tj(diode 1) = P (diode 1) X Rth(j-c) (per diode) + P (diode 2) x Rth(c) Table 4. Symbol IR(1) Static electrical characteristics (per diode) Parameter Reverse leakage current Test conditions Tj = 25 °C Tj = 125 °C Tj = 25 °C VF(2) Forward voltage drop Tj = 150 °C Tj = 25 °C Tj = 150 °C Typ. VR = VRRM Max. Unit 100 µA - 100 1000 1.50 IF = 100 A - 0.95 1.15 V IF = 200 A 1. Pulse test: tp = 5 ms, < 2% 2. Pulse test: tp = 380 µs, < 2% To evaluate the conduction losses use the following equation: P = 0.8 x IF(AV) + 0.0035 x IF2(RMS) 2/9 Min. Doc ID 023614 Rev 1 - 1.80 1.22 1.50 STTH200W03TV1 Table 5. Characteristics Dynamic characteristics (per diode) Test conditions Symbol Parameter IRM Reverse recovery current QRR Reverse recovery charge Sfactor Typ. Max. Unit - 9 12 A IF = 100 A, VR = 200 V dIF/dt = -200 A/µs Tj = 125 °C 400 Softness factor Reverse recovery time Tj = 25 °C tfr Forward recovery time Tj = 25 °C Forward recovery voltage Tj = 25 °C Figure 1. nC 0.3 trr VFP Min. IF = 1 A, VR = 30 V dIF/dt = -100 A/µs - IF = 100 A, VFR = 1.5 V dIF/dt = 100 A/µs Average forward power dissipation Figure 2. versus average forward current (per diode) PF(AV)(W) 40 - 2 50 ns 2400 ns 3 V Forward voltage drop versus forward current (per diode) IFM(A) 180 1000.0 160 δ=0.5 δ=1 Tj=150°C (Maximum values) δ=0.2 140 100.0 Tj=150 °C (Typical values) δ=0.1 120 δ=0.05 Tj=25 °C (Maximum values) 100 10.0 80 60 1.0 40 20 δ=tp/T IF(AV)(A) 0 0 20 Figure 3. 40 60 80 V FM(V) tp 0.1 100 120 0.0 140 Relative variation of thermal impedance, junction to case, versus pulse duration 0.4 Figure 4. 0.8 1.2 1.6 2.0 2.4 Peak reverse recovery current versus dIF/dt (typical values, per diode) IRM(A) Zth(j-c)/Rth(j-c) 20 1.0 0.9 IF=I F(AV) VR=200 V Tj=125 °C 16 0.8 0.7 12 0.6 0.5 8 0.4 0.3 4 0.2 dIF/dt(A/µs) tp(s) Single pulse 0.1 0.0 1.E-04 0 0 1.E-03 1.E-02 1.E-01 1.E+00 50 1.E+01 Doc ID 023614 Rev 1 100 150 200 250 300 350 400 450 500 dIF/dt(A/µs) 3/9 Characteristics Figure 5. STTH200W03TV1 Reverse recovery time versus dIF/dt Figure 6. (typical values, per diode) tRR(ns) Reverse recovery charges versus dIF/dt (typical values, per diode) QRR(nC) 120 800 IF=I F(AV) VR=200 V Tj=125 °C 100 IF=I F(AV) VR=200 V Tj=125 °C 700 600 80 500 60 400 300 40 200 20 dIF/dt(A/µs) 100 dIF /dt(A/µs) 0 0 0 50 Figure 7. 100 150 200 250 300 350 400 450 0 500 Reverse recovery softness factor versus dIF/dt (typical values, per diode) S FACTOR 50 100 Figure 8. 150 200 250 300 400 450 500 Relative variation of dynamic parameters versus junction temperature 2.5 IF = IF(AV) VR = 200 V Reference: T j =125 ° C 0.6 IF=I F(AV) VR=200 V Tj=125 °C 0.5 350 SFACTOR 2.0 0.4 1.5 0.3 1.0 IRM 0.2 0.5 0.1 QRR dIF /dt(A/µs) T j(°C) 0.0 0.0 0 50 Figure 9. 7 100 150 200 250 300 350 400 450 500 Transient peak forward voltage versus dIF/dt (typical values, per diode) 25 6 75 100 125 Figure 10. Forward recovery time versus dIF/dt (typical values, per diode) VFP (V) 1600 IF=I F(AV) Tj=125 °C 50 t FR(ns) IF = IF(AV) VFR= 1.5 V Tj = 125°C 1400 1200 5 1000 4 800 3 600 2 400 1 0 100 4/9 200 dIF/dt(A/µs) 150 200 250 300 350 400 450 500 0 100 Doc ID 023614 Rev 1 dIF/dt(A/µs) 150 200 250 300 350 400 450 500 STTH200W03TV1 Characteristics Figure 11. Junction capacitance versus reverse voltage applied (typical values, per diode) C( pF) 1000 F=1 MHz VOSC=30 mVRMS Tj=25 °C V R(V) 100 1 10 100 Doc ID 023614 Rev 1 1000 5/9 Ordering information scheme 2 STTH200W03TV1 Ordering information scheme Figure 12. Ordering information scheme STTH 200 W 03 TVx Ultrafast switching diode Average forward current 200 = 200 A Welding Repetitive peak reverse voltage 03 = 300 V Package TVx = ISOTOP 6/9 Doc ID 023614 Rev 1 STTH200W03TV1 3 Package information Package information ● Epoxy meets UL94, V0 ● Cooling method: by conduction (C) ● Recommended torque value: 1.3 N·m (1.5 N·m maximum) In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. Table 6. ISOTOP dimensions Dimensions Ref. Millimeters Inches E Min. Max. Min. Max. A 11.80 12.20 0.465 0.480 A1 8.90 9.10 0.350 0.358 B 7.8 8.20 0.307 0.323 E2 C 0.75 0.85 0.030 0.033 F C2 1.95 2.05 0.077 0.081 D 37.80 38.20 1.488 1.504 D1 31.50 31.70 1.240 1.248 E 25.15 25.50 0.990 1.004 E1 23.85 24.15 0.939 0.951 G2 A C A1 C2 F1 P1 D G S D1 E2 24.80 typ. 0.976 typ. G 14.90 15.10 0.587 0.594 G1 12.60 12.80 0.496 0.504 G2 3.50 4.30 0.138 0.169 F 4.10 4.30 0.161 0.169 G1 F1 4.60 5.00 0.181 0.197 E1 P 4.00 4.30 0.157 0.69 P1 4.00 4.40 0.157 0.173 S 30.10 30.30 1.185 1.193 B ØP Doc ID 023614 Rev 1 7/9 Ordering information STTH200W03TV1 4 Ordering information Table 7. Ordering information Order code Marking Package Weight Base qty(1) Delivery mode STTH200W03TV1 STTH200W03TV1 ISOTOP 27 g without screws 10 with screws Tube 1. This product is supplied with 40 terminal screws and washers for each tube. The screws and washers are supplied in a separate pack with the order. 5 Revision history Table 8. 8/9 Document revision history Date Revision 05-Oct-2012 1 Changes First issue Doc ID 023614 Rev 1 STTH200W03TV1 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2012 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 023614 Rev 1 9/9 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: STMicroelectronics: STTH200W03TV1