OMRON DRT2

Smart Slaves
Remote I/O Terminals with Transistors
DRT2-ID08(-1)/OD08(-1)/MD16(-1)
MIL Connector Terminals with Transistors
DRT2-ID16ML(-1)/OD16ML(-1)/ID16MLX(-1)/OD16MLX(-1)
Environment-resistive Terminals with Transistors (without detection functions)
DRT2-ID04CL(-1)/OD04CL(-1)/ID08CL(-1)/OD08CL(-1)/
MD16CL(-1)/HD16CL(-1)
Remote Maintenance
The lineup now includes a wide variety of Smart Slaves with different numbers of control
points that contribute to production site servicing and repair.
Note: Do not use this document to operate the Unit.
OMRON Corporation
Industrial Automation Company
Control Devices Division H.Q.
Shiokoji Horikawa, Shimogyo-ku,
Kyoto, 600-8530 Japan
Tel:(81)75-344-7109
Fax:(81)75-344-7149
OMRON ELECTRONICS LLC
1 East Commerce Drive, Schaumburg,
IL 60173 U.S.A.
Tel:(1)847-843-7900/Fax:(1)847-843-8568
Regional Headquarters
OMRON ASIA PACIFIC PTE. LTD.
83 Clemenceau Avenue,
#11-01, UE Square,
Singapore 239920
Tel:(65)6835-3011/Fax:(65)6835-2711
OMRON EUROPE B.V.
Wegalaan 67-69, NL-2132 JD Hoofddorp
The Netherlands
Tel:(31)2356-81-300/
Fax:(31)2356-81-388
OMRON (CHINA) CO., LTD.
Room 2211, Bank of China Tower,
200 Yin Cheng Zhong Road,
PuDong New Area, Shanghai, 200120 China
Tel:(86)21-5037-2222/Fax:(86)21-5037-2200
Printed on 100%
Recycled Paper
Authorized Distributor:
Note: Specifications subject to change without notice.
Cat. No. R110-E1-05
Printed in Japan
1006-0.3M
Use production site information in a variety of applications,
such as maintenance and quality control.
Maintenance System
Control System
DeviceNet
Configurator
OMRON's DRT2-series Smart Slaves do not just input and output ON/OFF signals. They collect a variety
of value-added information to help increase the rate of operation without changing the wiring for
existing DeviceNet networks. In particular, they allow the separation of control systems and
maintenance systems so that maintenance systems can be created independently of control systems.
Operating time monitor
Contact operation counter
Preventive maintenance
of equipment
Unit conduction time monitor
Slave and connected component comments
Control System
Maintenance System
Reduced startup time
Ethernet
2
PLC
Maintenance is
required for
cylinder 23A in
inspection line A!
Easy-to-view
Display
Reliable equipment
startup
I/O power status monitor
Network power voltage monitor
Reduced downtime
PLC
Maintenance information
Communication error history
monitor
Configurator
Unit conduction
time monitor
(See note.)
Control
information
Control I/O
What is the
present
communications
voltage?
It's time for
motor
maintenance!
Network power
voltage monitor
Operating time, contact operation
counter
DRT2-series
Smart Slave
Maintenance information
The wiring to
the I/O device is
short-circuited
or broken!
1
Machine Operation
Monitored by Slave
Measuring
Counting
The Slave Unit represents
machine operating time and
operational changes as data,
enabling monitoring without
increasing the load between
controllers.
By counting the number of
ON/OFF operations and the
total operating time, the Slave
Unit can provide notification
when maintenance is required.
3
Faster Maintenance
Work
The Slave can hold comments, allowing
quick identification of fault locations and
faulty devices.
Sensor
(Connected device
comment)
Pneumatic valve
(Connected device
comment)
Cylinder
(Connected device comment)
External load
short-circuit detection
Contact operation
counter (See note.)
I/O power status
monitor
What was the
cause
of the error?
Communication error
history monitor
Using OMRON Temperature Input Terminals for
Maintenance
Failure Prediction
and Maintenance
If prolonging the
time it takes to
reach a certain
temperature may
degrade
equipment:
The operating time of a preset temperature range is counted in 1-s units.
Slaves can notify the
Master when a setting
is exceeded.
Indicator service
life control
Input
Semiconductor
manufacturing equipment
Operating time
Time
The peaks or valleys of temperature inputs that change in a regular pattern
are counted to predict when devices operating with severe temperature
swings are due for maintenance.
Information monitoring for
each Slave
Short Startup
If it takes too long
to modify the
ladder program on
the Master when a
Temperature
Sensor is replaced:
Slave comment
Is the I/O
power supply
turned ON?
Note: The contact operation counter function and the unit conduction time monitor function cannot be used simultaneously.
Collect a variety of data from maintenance systems without
influencing control systems and productivity.
All data can be converted to electronic format and,
by combining with an OMRON PLC (CS/CJ Series),
checked directly from Ethernet or the Internet to
allow remote maintenance.
Operating time
monitor
It might be time
for a switch
inspection!
Temperature
DRT2-series
Smart Slave
The cylinder's
speed is
incorrect!
Slaves internally
convert display values
to temperature input
values so the Controller
program no longer has
to be modified to
perform this task.
Scaling points for 0%
and 100% are set from
the Configurator
Scaling performed
inside the Slave
Sensor replaced by one
with a different input range
Status confirmation using the status icon
Operating time monitor error or contact
operation count monitor error
Unit conduction time monitor error
Communications power voltage monitor error
2
3
Use production site information in a variety of applications,
such as maintenance and quality control.
Maintenance System
Control System
DeviceNet
Configurator
OMRON's DRT2-series Smart Slaves do not just input and output ON/OFF signals. They collect a variety
of value-added information to help increase the rate of operation without changing the wiring for
existing DeviceNet networks. In particular, they allow the separation of control systems and
maintenance systems so that maintenance systems can be created independently of control systems.
Operating time monitor
Contact operation counter
Preventive maintenance
of equipment
Unit conduction time monitor
Slave and connected component comments
Control System
Maintenance System
Reduced startup time
Ethernet
2
PLC
Maintenance is
required for
cylinder 23A in
inspection line A!
Easy-to-view
Display
Reliable equipment
startup
I/O power status monitor
Network power voltage monitor
Reduced downtime
PLC
Maintenance information
Communication error history
monitor
Configurator
Unit conduction
time monitor
(See note.)
Control
information
Control I/O
What is the
present
communications
voltage?
It's time for
motor
maintenance!
Network power
voltage monitor
Operating time, contact operation
counter
DRT2-series
Smart Slave
Maintenance information
The wiring to
the I/O device is
short-circuited
or broken!
1
Machine Operation
Monitored by Slave
Measuring
Counting
The Slave Unit represents
machine operating time and
operational changes as data,
enabling monitoring without
increasing the load between
controllers.
By counting the number of
ON/OFF operations and the
total operating time, the Slave
Unit can provide notification
when maintenance is required.
3
Faster Maintenance
Work
The Slave can hold comments, allowing
quick identification of fault locations and
faulty devices.
Sensor
(Connected device
comment)
Pneumatic valve
(Connected device
comment)
Cylinder
(Connected device comment)
External load
short-circuit detection
Contact operation
counter (See note.)
I/O power status
monitor
What was the
cause
of the error?
Communication error
history monitor
Using OMRON Temperature Input Terminals for
Maintenance
Failure Prediction
and Maintenance
If prolonging the
time it takes to
reach a certain
temperature may
degrade
equipment:
The operating time of a preset temperature range is counted in 1-s units.
Slaves can notify the
Master when a setting
is exceeded.
Indicator service
life control
Input
Semiconductor
manufacturing equipment
Operating time
Time
The peaks or valleys of temperature inputs that change in a regular pattern
are counted to predict when devices operating with severe temperature
swings are due for maintenance.
Information monitoring for
each Slave
Short Startup
If it takes too long
to modify the
ladder program on
the Master when a
Temperature
Sensor is replaced:
Slave comment
Is the I/O
power supply
turned ON?
Note: The contact operation counter function and the unit conduction time monitor function cannot be used simultaneously.
Collect a variety of data from maintenance systems without
influencing control systems and productivity.
All data can be converted to electronic format and,
by combining with an OMRON PLC (CS/CJ Series),
checked directly from Ethernet or the Internet to
allow remote maintenance.
Operating time
monitor
It might be time
for a switch
inspection!
Temperature
DRT2-series
Smart Slave
The cylinder's
speed is
incorrect!
Slaves internally
convert display values
to temperature input
values so the Controller
program no longer has
to be modified to
perform this task.
Scaling points for 0%
and 100% are set from
the Configurator
Scaling performed
inside the Slave
Sensor replaced by one
with a different input range
Status confirmation using the status icon
Operating time monitor error or contact
operation count monitor error
Unit conduction time monitor error
Communications power voltage monitor error
2
3
Wide variety of control and maintenance functions using DeviceNet.
Monitor network devices using
a DeviceNet Configurator.
I/O Control and Maintenance
Board Terminals
with MIL Connectors
DRT2-ID32B(-1)
DRT2-OD32B(-1)
DRT2-MD32B(-1)
DRT2-ID32BV(-1)
DRT2-OD32BV(-1)
DRT2-MD32BV(-1)
DeviceNet Configurator
First Board-type Smart Slave Terminals
User boards attach easily to
the DRT2- D32V(-1) using screws.
Settings and monitoring
for startup
Settings and monitoring
for maintenance
Remote I/O Terminals with
Screw-less Clamps
DRT2-ID32SL(H)(-1)
DRT2-OD32SL(H)(-1)
DRT2-MD32SL(H)(-1)
Wiring is completed in a single
action.
No screw tightening required.
Removable terminal blocks.
Advanced models detect ground
faults and broken lines in I/O wiring.
Applicable wire sizes range
from AWG24 to AWG16 (0.2
to 1.25 mm2 dia.)
Remote I/O Terminals
with Transistors
DRT2-ID16(-1)
DRT2-OD16(-1)
DRT2-ID08(-1)
DRT2-OD08(-1)
DRT2-MD16(-1)
I/O points can be
extended by adding
Expansion Units.
Environment-resistive
Terminals with Transistors
(with detection functions)
Remote I/O Terminal
with Relay Outputs
Environment-resistive
Terminals with Transistors
(without detection functions)
DRT2-ROS16
One-step relay exchange
Operation time monitor
function enabled by
combining Remote I/O
Terminals with
Expansion I/O Units.
DRT2-ID08C(-1)
DRT2-OD08C(-1)
DRT2-HD16C(-1)
High resistance to
environments (IP67).
Detecting shorts in the
sensor power supply is
also possible.
DRT2-ID04CL(-1)
DRT2-OD04CL(-1)
DRT2-ID08CL(-1)
DRT2-OD08CL(-1)
DRT2-MD16CL(-1)
DRT2-HD16CL(-1)
DRT2-WD16CL(-1)
Remote I/O Terminals
with 3-tier Terminal Blocks
MIL Connector
Terminals
DRT2-ID16TA(-1)
DRT2-OD16TA(-1)
DRT2-MD16TA(-1)
The 3-tier Terminal Block
means that wiring
locations are easy to find
with no wiring to
intermediate terminals.
DRT2-ID32ML(-1)
DRT2-OD32ML(-1)
DRT2-MD32ML(-1)
DRT2-ID16ML(-1)
DRT2-OD16ML(-1)
DRT2-ID16MLX(-1)
DRT2-OD16MLX(-1)
Ultra-small 32-point remote
terminals (35 x 60 x 80 mm
(W x D x H)).
Single action
CS/CJ-series
DeviceNet Unit
PLC
Models with 8 Input,
8 Output, or 16 I/O Points
Added to the Lineup
Remote I/O Terminals with
IP67 High Environmental
Resistance
Terminals with
16 Inputs or Outputs
e-CON Connector Terminals
Remote I/O Terminals
with Transistors
DRT2-ID08(-1)/OD08(-1)/
MD16(-1)
Collect a variety of data from
maintenance systems without
influencing control systems and
productivity.
Communications power supply
voltage monitor, deterioration due
to aging, operating time data, and
other information can be easily
collected and managed via the
network.
Locations of problems can be easily
identified.
4
Environment-resistive Terminals
with Transistors
DRT2-ID04CL(-1)/OD04CL(-1)/
ID08CL(-1)/OD08CL(-1)/MD16CL(-1)/
HD16CL(-1)/WD16CL(-1)
Smart Slave functions provide robust
support for effective maintenance and
monitoring device operation status.
The terminals conform to IP67 and use
materials selected for resistance to oil
and spattering.
Models with two-output connector are
also available to improve ease of
connection with hydraulic valve
devices.
MIL Connector Terminals
with Transistors
DRT2-ID16ML(-1)/
OD16ML(-1)/
ID16MLX(-1)/
OD16MLX(-1)
Connection with an array of
I/O interfaces is achieved by
combining adaptor boards
for D-Sub or other
interfaces.
DRT2-ID16S(-1)
DRT2-MD16S(-1)
Includes industry-standard
e-CON connector that can be
used to connect prewired
sensors without using special
tools.
(The OMRON XN2 Connector can
be used.)
Sensor Input and Maintenance
Temperature Input
Terminals
Analog I/O Terminals
DRT2-AD04/DRT2-AD04H
DRT2-DA02
DRT2-TS04T
DRT2-TS04P
The DRT2-AD04H offers high
resolution at 1/30,000 (full scale) and
insulation between input channels.
The DRT2-AD04 and DRT2-DA02
support a wide variety of data
sampling function, including scaling,
peak/bottom hold, top/valley hold,
comparator, integral, and differential
operation functions.
Offers basically the same functions as
Analog Input Terminals, such as
scaling and comparators.
Also provides functions that are
available only from Temperature
Input Terminals, such as the time in a
preset temperature range and
temperature difference detection
between input channels.
Analog Control and Maintenance
5
DeviceNet Communications
Unit for E5ZN Digital
Temperature Controllers
E5ZN-DRT
Monitoring and setting of
Temperature Controller from
PLC.
Batch download of all
Temperature Controller
parameters from Configurator.
DeviceNet Communications
Units/Cards for Inverters
3G3MV-PDRT2 (for 3G3MV Series)
3G3RV-PDRT2 (for 3G3RV Series)
Frequencies and other
specifications can be designated
from PLC.
Monitor-related maintenance
possible, including output current
(torque) error detection/trace,
operation monitor, and generalpurpose I/O read.
Monitor Control and Maintenance
6
Functions Supported by Smart Slaves
General-purpose Slaves
Slave name
Remote I/O Terminals
Type
Model
I/O classification
Function
Operating time monitor
DRT2@D08(-1)
Input Output Input Output
❍ (Inputs and
Models with 3-tier
Terminal Blocks
Models with
Transistors
Models with MIL
Connectors
DRT2MD16(-1)
DRT2ROS16
DRT2-@D16TA(-1)
DRT2-@D32ML(-1)
DRT2-@D16ML(-1)
DRT2-@D16MLX(-1)
DRT2-@D32B(-1)
DRT2-@D32BV(-1)
Input/
output
Output
Input Output
❍
---
outputs only)
Board Terminals
Model with
Relay Outputs
Models with Transistors
DRT2@D16(-1)
MIL Connector
Terminals
Input/
Input/
Input/
Input Output
Input Output
output
output
output
❍
❍
❍
General-purpose Slaves
Environment-resistive Slaves
Screw-less Clamp Terminals
Environment-resistive Terminals
Generalpurpose Slaves
Models with Transistors
Models with Transistors
Models with Transistors
Models with Transistors
With Detection Functions Without Detection Functions With Detection Functions Without Detection Functions
DRT2-@D32SLH(-1)
Input
Output
DRT2-@D32SL(-1)
Input/
output
Input
❍
Output
Input/
output
DRT2-@D04CL(-1)
DRT2-@D08CL(-1)
DRT2-@D16CL(-1)
DRT2-@D08C(-1)
DRT2-@D16C(-1)
Input
Output
❍
Input
Output
---
e-con
Connector
Terminals
DRT2@D16S(-1)
Input/
output
Input
Input/
output
❍
---
❍
Analog Slaves
Analog I/O Terminals
DRT2- DRT2AD04 AD04H
Temperature
Input
Terminals
DRT2DRT2-TS04@
DA02
Input
Output
Input
---
-----
Contact operation count monitor
❍
❍
❍
❍
❍
❍
---
Unit conduction time monitor
❍
❍
❍
❍
❍
❍
❍
❍
Total RUN (ON) time monitor
❍
❍
❍
❍
❍
❍
---
---
Unit comment
❍
❍
❍
❍
❍
❍
❍
❍
Connected device comment
❍
❍
❍
❍
❍
❍
❍
❍
Network power voltage monitor
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
---
---
---
❍
I/O power status monitor
❍
---
❍
❍
❍
Input filter
❍
---
❍
---
❍
❍
---
❍
---
❍
❍
---
❍
❍
---
❍
❍
---
❍
---
❍
❍
---
❍
---
❍
❍
---
---
Prevention of malfunctions due to
sensor inrush current
❍
---
❍
---
❍
---
❍
---
❍
❍
---
❍
❍
---
❍
❍
---
❍
---
❍
❍
---
❍
---
❍
❍
---
---
---
❍
---
❍
---
---
Communications error history monitor
Sensor power short-circuit detection
❍
---
---
❍
❍
❍
❍ (See note.)
External load short-circuit detection
---
---
---
---
Sensor disconnection detection
---
---
---
❍
---
❍
External load disconnection detection
---
---
---
---
❍
❍
Removable terminal blocks
❍
---
---
❍
Automatic baud rate detection
❍
❍
❍
❍
Unit power supply wiring not required
❍
❍
❍
❍
Power supply wiring not required for
input devices
---
---
---
---
Expansion I/O Units mountable
❍
❍
---
---
❍
---
❍
---
---
---
❍
---
--❍
---
❍
---
---
---
---
---
---
---
---
---
---
---
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
---
---
---
❍
---
---
---
---
---
---
---
---
---
Scaling
---
---
---
---
---
---
❍
❍
User calibration
---
---
---
---
---
---
❍
❍
Last maintenance date
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
Integral function
---
---
---
---
---
---
Moving average processing
---
---
---
---
---
---
Number of AD conversion points
setting (conversion cycle)
---
---
---
---
---
---
Peak/bottom hold
---
---
---
---
---
---
❍
---
❍
Top/valley hold
---
---
---
---
---
---
❍
---
❍
Change rate calculations
---
---
---
---
---
---
❍
---
❍
Comparator function
---
---
---
---
---
---
❍
---
❍
Setting output value for errors
---
---
---
---
---
---
---
❍
---
Top/valley count
---
---
---
---
---
---
---
❍
Operating time in a preset
temperature range
---
---
---
---
---
---
---
❍
Temperature difference detection
between input channels
---
---
---
---
---
---
---
❍
❍
---
❍
---
❍
---
❍: Yes, ---: No
Note: The contact operation count monitor and the total RUN (ON) time monitor cannot be used at the same time for one contact.
External load detection is supported only by the DRT2-MD32SLH-1 and DRT2-OD32SLH-1.
7
DRT2-series Smart Slave
DRT2-series Smart Slave
8
Specifications
Communications
power supply voltage
11 to 25 VDC (supplied from communications connector)
I/O power supply voltage 20.4 to 26.4 VDC (24 VDC −15% to +10%)
Noise immunity
Conforms to IEC61000-4-4, 2 kV (power lines)
Vibration resistance
10 to 60 Hz, 0.7-mm double amplitude, 60 to 150 Hz, 50 ms2 for 80 min each in the X, Y, and Z directions
Shock resistance
150m/s2, 6 directions, 3 times each
Dielectric strength
500 VAC (between isolated circuits)
Insulation resistance
20 MΩ min. (between isolated circuits)
Ambient operating
temperature
−10 to 55°C
Ambient operating
humidity
25 to 85%
Ambient operating
atmosphere
No corrosive gases
Ambient storage
temperature
−20 to 65°C
Degree of protection
IP67
Mounting method
DRT2-@D08@-1@/@D16(-1):
DRT2-@D32ML(-1)/@D16ML(-1):
DRT2-@D04CL(-1)/@D08CL(-1)/@D16CL(-1):
35-mm DIN Track
35-mm DIN Track
M5 screws mounting (front or back)
DRT2-@D08(-1)/@D16(-1):
DRT2-@D32ML(-1)/@D16ML(-1):
M3 (power supply and I/O terminals): 0.3 to 0.5 N·m
M2 (communications connector screws): 0.26 to 0.3 N·m,
M3 (screw terminals): 0.3 to 0.5N·m
Round connectors (communications connector, power supply, and I/O): 0.39 to 0.49 N·m
M5 (Unit mounting from the front): 1.47 to 1.96 N·m
Screw tightening
torque
DRT2-@D04CL(-1)/@D08CL(-1)/@D16CL(-1):
DRT2-Series Smart Slave
9
Input Specifications
■ Remote I/O Terminals with Transistors
●Terminals with 8 Inputs
Item
■ Standard Environment-resistive Terminals and
Environment-resistive Terminals with Transistors
Model
●Terminals with 4 Inputs
DRT2-ID08(-1)
Input current
6.0 mA max. per point at 24 VDC
Item
ON delay time
1.5 ms max.
Internal I/O common
NPN
Model
DRT2-ID04CL
DRT2-ID04CL-1
PNP
1.5 ms max.
Number of I/O points
4 inputs
NPN
15 VDC min. (between each input terminal and V)
ON voltage
15 VDC min. (between each
input terminal and V)
15 VDC min. (between each
input terminal and G)
PNP
15 VDC min. (between each input terminal and G)
NPN
5 VDC max. (between each input terminal and V)
OFF voltage
5 VDC max. (between each
input terminal and V)
5 VDC min. (between each
input terminal and G)
PNP
5 VDC min. (between each input terminal and G)
OFF current
1 mA max.
OFF current
1.0 mA max.
Input current
6.0 mA max. per point at 24 VDC
3.0 mA max. per point at 17 VDC
Isolation method
Photocoupler isolation
Input indicator
Yellow LED indicator
OFF delay time
ON voltage
OFF voltage
●Terminals with 8 Inputs/8 Outputs
Item
Model
DRT2-MD16
DRT2-MD16-1
PNP
I/O power supply voltage
20.4 to 26.4 VDC (24 VDC, −15 to +10%)
ON delay time
1.5 ms max.
OFF delay time
1.5 ms max.
Number of points per
common
4 points per common
Internal I/O common
NPN
Number of I/O points
8 inputs
ON voltage
15 VDC min. (between each
input terminal and V)
15 VDC min. (between each
input terminal and G)
Item
Internal I/O common
NPN
OFF voltage
5 VDC max. (between each
input terminal and V)
5 VDC min. (between each
input terminal and G)
Number of I/O points
8 inputs
OFF current
1 mA max.
ON voltage
15 VDC min. (between each
input terminal and V)
15 VDC min. (between each
input terminal and G)
Input current
6.0 mA max. per point at 24 VDC
3.0 mA max. per point at 17 VDC
OFF voltage
5 VDC max. (between each
input terminal and V)
5 VDC min. (between each
input terminal and G)
ON delay time
1.5 ms max.
OFF current
1 mA max.
OFF delay time
1.5 ms max.
Number of points per
common
Input current
8 points per common
6.0 mA6.0 mA max. per point at 24 VDC
3.0 mA max. per point at 17 VDC
■ MIL Connector Terminals with Transistors
●Terminals with 16 Inputs, with Connectors
Model
DRT2-ID16ML
DRT2-ID16MLX
Item
DRT2-ID16ML-1
DRT2-ID16MLX-1
Internal I/O common
NPN
Number of I/O points
16 inputs
ON voltage
17 VDC min. (between each
input terminal and V)
17 VDC min. (between each
input terminal and G)
OFF voltage
5 VDC max. (between each
input terminal and V)
15 VDC min. (between each
input terminal and G)
OFF current
1 mA max.
Input current
6.0 mA max. per point at 24 VDC
3.0 mA max. per point at 17 VDC
ON delay time
1.5 ms max.
OFF delay time
1.5 ms max.
Max. number of
simultaneous ON
input points
16
Number of points per
common
16 points per common
PNP
●Terminals with 8 Inputs
DRT2-Series Smart Slave
DRT2-ID08CL
DRT2-ID08CL-1
PNP
I/O power supply voltage
20.4 to 26.4 VDC (24 VDC, −15 to +10%)
ON delay time
1.5 ms max.
OFF delay time
1.5 ms max.
Number of points per
common
8 points per common
●Terminals with 16 Inputs
Item
Model
DRT2-HD16CL
DRT2-HD16CL-1
Internal I/O common
NPN
Number of I/O points
16 inputs
ON voltage
15 VDC min. (between each
input terminal and V)
15 VDC min. (between each
input terminal and G)
OFF voltage
5 VDC max. (between each
input terminal and V)
15 VDC min. (between each
input terminal and G)
OFF currrent
1 mA max.
Input current
6.0 mA max. per point at 24 VDC
3.0 mA max. per point at 17 VDC
PNP
I/O power supply voltage
20.4 to 26.4 VDC (24 VDC, −15 to +10%)
ON delay time
1.5 ms max.
OFF delay time
1.5 ms max.
Number of points per
common
16 points per common
●Terminals with 8 Inputs/8 Outputs
Item
10
Model
Model
DRT2-MD16CL
DRT2-MD16CL-1
Internal I/O common
NPN
PNP
Number of I/O points
8 inputs
ON voltage
15 VDC min. (between each
input terminal and V)
15 VDC min. (between each
input terminal and G)
OFF voltage
5 VDC max. (between each
input terminal and V)
5 VDC min. (between each
input terminal and G)
OFF currrent
1 mA max.
Input current
6.0 mA max. per point at 24 VDC
3.0 max. per point at 17 VDC
I/O power supply voltage
20.4 to 26.4 VDC (24 VDC, −15 to +10%)
ON delay time
1.5 ms max.
OFF delay time
1.5 ms max.
Number of points per
common
8 points per common
Output Specifications
■ Remote I/O Terminals with Transistors
●Terminals with 8 Outputs
Item
Model
■ Standard Environment-resistive Terminals and
Environment-resistive Terminals with Transistors
●Terminals with 4 Outputs
DRT2-OD08(-1)
Rated output current
0.5 A per point, 4.0 A per common
Item
ON delay time
0.5 ms max.
Internal I/O common
NPN
OFF delay time
1.5 ms max.
Number of I/O points
4 outputs
Residual voltage
1.2 V max.
Rated output current
0.5 A per point, 4 A per common
Leakage current
0.1 mA max.
Isolation method
Photocoupler isolation
Residual voltage
1.2 V max. (0.5 A DC
between each output
terminal and G)
Output indicator
Yellow LED indicator
Leakage current
0.1 mA max.
●Terminals with 8 Inputs/8 Outputs
Item
Model
Internal I/O common
DRT2-MD16
NPN
DRT2-MD16-1
PNP
Number of I/O points
8 outputs
Rated output current
0.5 A per point, 4 A per common
Residual voltage
1.2 V max. (0.5 A DC
between each output
terminal and G)
1.2 V max. (0.5 A DC
between each output
terminal and V)
Model
DRT2-OD04CL
DRT2-OD04CL-1
PNP
1.2 V max. (0.5 A DC
between each output
terminal and V)
I/O power supply voltage
20.4 to 26.4 VDC (24 VDC, −15 to +10%)
ON delay time
0.5 ms max.
OFF delay time
1.5 ms max.
Number of points per
common
4 points per common
●Terminals with 8 Outputs
Item
Model
DRT2-OD08CL
0.1 mA max.
ON delay time
0.5 ms max.
Number of I/O points
OFF delay time
1.5 ms max.
Rated output current
0.5 A per point, 4 A per common
Residual voltage
1.2 V max. (0.5 A DC
between each output
terminal and G)
Leakage current
0.1 mA max.
Leakage current
Number of points per
common
8 points per common
■ MIL Connector Terminals with Transistors
●Terminals with 16 Outputs, with Connectors
Model
DRT2-OD16ML
DRT2-OD16MLX
Item
Internal I/O common
NPN
DRT2-OD16ML-1
DRT2-OD16MLX-1
PNP
NPN
8 outputs
DRT2-OD08CL-1
Internal I/O common
PNP
1.2 V max. (0.5 A DC
between each output
terminal and V)
I/O power supply voltage
20.4 to 26.4 VDC (24 VDC, −15 to +10%)
ON delay time
0.5 ms max.
OFF delay time
1.5 ms max.
Number of points per
common
8 points per common
●Terminals with 16 Outputs
Number of I/O points
16 outputs
Rated output current
0.3 A per point, 2 A per common (See note.)
Residual voltage
1.2 V max. (0.3 A DC
between each output
terminal and G)
Leakage current
0.1 mA max.
ON delay time
0.5 ms max.
OFF delay time
Number of points per
common
1.2 V max. (0.3 A DC
between each output
terminal and V)
Item
Model
DRT2-WD16CL
Internal I/O common
NPN
Number of I/O points
16 outputs
DRT2-WD16CL-1
PNP
Rated output current
0.5 A per point, 4 A per common
1.5 ms max.
Residual voltage
1.2 V max. (0.5 A DC
between each output
terminal and G)
16 points per common
Leakage current
0.1 mA max.
Note: Make sure the total external load current does not exceed 2 A.
Make sure that the V and G terminals do not exceed 1 A per terminal.
1.2 V max. (0.5 A DC
between each output
terminal and V)
I/O power supply voltage
20.4 to 26.4 VDC (24 VDC, −15 to +10%)
ON delay time
0.5 ms max.
OFF delay time
1.5 ms max.
Number of points per
common
16 points per common
●Terminals with 8 Inputs/8 Outputs
Item
Model
DRT2-MD16CL
Internal I/O common
NPN
Number of I/O points
8 outputs
DRT2-MD16CL-1
PNP
Rated output current
0.5 A per point, 4 A per common
Residual voltage
1.2 V max. (0.5 A DC
between each output
terminal and G)
Leakage current
0.1 mA max.
1.2 V max. (0.5 A DC
between each output
terminal and V)
I/O power supply voltage
20.4 to 26.4 VDC (24 VDC, −15 to +10%)
ON delay time
0.5 ms max.
OFF delay time
1.5 ms max.
Number of points per
common
8 points per common
DRT2-Series Smart Slave
11
Internal Circuit Configuration
■ Remote I/O Terminals with Transistors
DRT2-ID08 (NPN)
DRT2-ID08-1 (PNP)
Communications
connector
Photocoupler
CAN L
V−
Internal
circuits
DRAIN
Physical
layer
CAN H
V 24 VDC
Photocoupler
V+
0
0
CAN H
1
1
DRAIN
V 24 VDC
CAN L
Photocoupler
Photocoupler
Internal
circuits
V+
Physical
layer
Communications
connector
V−
G
DC-DC
Converter
(non-insulated)
G
DRT2-OD08 (NPN)
DRT2-OD08-1 (PNP)
Communications
connector
V+
V 24 VDC
0
1
V−
CAN H
DRAIN
CAN L
0
1
Internal
circuits
Internal
circuits
V−
Photocoupler
DC-DC
Converter
(non-insulated)
V 24 VDC
Photocoupler
Physical
layer
Photocoupler
DC-DC
Converter
(non-insulated)
Voltage
stepdown
CAN L
Physical
layer
DRAIN
Photocoupler
Voltage
stepdown
Communications
connector
V+
CAN H
DC-DC
Converter
(non-insulated)
G
G
DRT2-MD16 (NPN)
DRT2-MD16-1 (PNP)
V1 24 VDC
Photocoupler
Photocoupler
0
V1 24 VDC
1
0
1
Photocoupler
Photocoupler
V−
V2 24 VDC
G1
V2 24 VDC
Photocoupler
0
0
1
Photocoupler
1
DC-DC
Converter
(non-insulated)
Photocoupler
Voltage
stepdown
DC-DC
Converter
(non-insulated)
CAN L
Internal
circuits
V−
Voltage
stepdown
CAN L
DRAIN
G1
Internal
circuits
DRAIN
Physical
layer
CAN H
Photocoupler
V+
CAN H
V+
Physical
layer
Communications
connector
Communications
connector
G2
12
DRT2-Series Smart Slave
G2
■ MIL Connector Terminals with Transistors
DRT2-ID16ML(X)
DRT2-ID16ML(X)-1
V+
V+
CAN H
Physical
layer
DRAIN
Internal
circuits
CAN L
V−
Physical
layer
CAN L
V
Internal
circuits
DRAIN
CAN H
V−
G
Input (0 to 15)
Input (0 to 15)
Photocoupler
Photocoupler
DC-DC
Converter
(non-insulated)
DRT2-OD16ML(X)
DRT2-OD16ML(X)-1
V+
V+
Internal
circuits
V−
V
DRAIN
Physical
layer
CAN L
Output (0 to 15)
V−
Photocoupler
V
Output (0 to 15)
G
DC-DC
Converter
(non-insulated)
Photocoupler
DC-DC
Converter
(non-insulated)
Voltage
stepdown
Physical
layer
CAN L
CAN H
Internal
circuits
Voltage
stepdown
CAN H
DRAIN
V
G
DC-DC
Converter
(non-insulated)
DRT2-Series Smart Slave
G
13
■ Standard Environment-resistive Terminals and Environment-resistive Terminals with Transistors
DRT2-ID04CL (NPN)
DRT2-ID04CL-1 (PNP)
V
4
V
4
1
3
1
2
G
V+
CAN-H
IN0
Internal circuits
CAN-L
4
V−
1 5 3
2
G
G
4
3
1
CAN-L
V
4
V−
1 5 3
2
2
G
4
3
1
G
4
3
1
V
2
V+
IN1
DRAIN
IN0
Internal circuits
CAN-H
3
2
IN1
V
G
DRAIN
2
4
3
1
V
2
DRT2-OD04CL-1 (PNP)
G
4
1
3
Voltage
stepdown
4
V−
1 5 3
2
V+
G
4
1
3
V
2
CAN-H
OUT0
4
3
1
V
2
V+
OUT1
4
DRAIN
3
1
CAN-L
4
V−
1 5 3
2
V
OUT0
Internal circuits
CAN-L
V
2
Internal circuits
CAN-H
Voltage
stepdown
DRT2-OD04CL (NPN)
G
4
3
1
2
OUT1
DRAIN
G
2
4
3
1
2
DRT2-ID08CL (NPN)
DRT2-ID08CL-1 (PNP)
V
V
4
4
1
3
1
2
2
V+
CAN-H
IN0
Internal circuits
CAN-L
4
V−
1 5 3
G
4
3
1
V
2
V+
IN1
G
DRAIN
4
3
1
CAN-L
4
V−
1 5 3
2
IN0
Internal circuits
CAN-H
G
G
DRAIN
4
3
1
Voltage
stepdown
3
V
2
G
4
1
3
V
2
4
3
1
V
2
OUT1
4
3
1
V
CAN-L
4
V−
1 5 3
2
V+
Internal circuits
CAN-H
OUT0
2
OUT0
G
4
3
1
2
OUT1
DRAIN
G
4
3
1
2
14
V
2
4
1
Voltage
stepdown
Internal circuits
CAN-H
DRAIN
V
DRT2-OD08CL-1 (PNP)
G
V+
1
IN1
V
DRT2-OD08CL (NPN)
4
V−
1 5 3
2
4
3
2
2
CAN-L
3
2
G
G
DRT2-Series Smart Slave
DRT2-HD16CL (NPN)
DRT2-HD16CL-1 (PNP)
V
4
V
1
4
3
1
CAN-L
4
V−
1 5 3
2
G
IN0
CAN-H
4
G
3
3
2
IN0
CAN-L
V
1
4
V−
1 5 3
2
IN1
2
V+
V+
DRAIN
Internal circuits
CAN-H
Internal circuits
2
G
G
4
3
1
V
2
IN1
DRAIN
DRT2-WD16CL-1 (PNP)
4
G
1
Voltage
stepdown
4
V−
1 5 3
2
V+
G
4
1
3
4
3
V
1
2
CAN-L
4
V−
1 5 3
2
OUT1
V+
OUT0
G
4
3
1
2
OUT1
DRAIN
DRAIN
DRT2-MD16CL (NPN)
DRT2-MD16CL-1 (PNP)
G2
V1
4
1
3
V2
G2
V1
4
1
2
G1
3
2
G1
IN0
G
4
3
1
G
4
3
1
V
2
IN1
IN1
Internal circuits
CAN-L
4
V−
1 5 3
2
V+
Voltage
stepdown
DRAIN
DRAIN
Voltage
stepdown
CAN-H
Internal circuits
V+
V2
IN0
V
2
CAN-H
CAN-L
4
V−
1 5 3
2
V
2
CAN-H
OUT0
Internal circuits
CAN-L
V
3
2
Internal circuits
CAN-H
Voltage
stepdown
DRT2-WD16CL (NPN)
OUT0
4
3
1
V
2
OUT1
OUT0
G
4
3
1
2
OUT1
DRT2-Series Smart Slave
15
Dimensions
(Unit: mm)
■ Remote I/O Terminals with Transistors
43.9
●Remote I/O Terminals
DRT2-ID08(-1)
DRT2-OD08(-1)
DRT2-MD16(-1)
50
29.9
115
3.1
49.7
■ MIL Connector Terminals with Transistors
DRT2-ID16ML(-1)
DRT2-OD16ML(-1)
DRT2-ID16MLX(-1)
DRT2-OD16MLX(-1)
(83)
63
60
80
52.7
5
Dimensions inside parentheses are for reference only.
35
■ Standard Environment-resistive Terminals and Environment-resistive Terminals with Transistors
DRT2-ID04CL(-1)
DRT2-OD04CL(-1)
A
B
A
B
1
3
2
4
60
A
B
A
B
123
Two, M5 holes or 5.3 dia.
Mounting hole dimensions
113±0.2
(125)
37.7
27.3
16
DRT2-Series Smart Slave
DRT2-ID08CL(-1)
DRT2-OD08CL(-1)
DRT2-HD16CL(-1)
DRT2-WD16CL(-1)
DRT2-MD16CL(-1)
5
7
4
6
8
A
B
A
B
A
B
A
B
78
3
2
456
78
A
B
A
B
1
OUT
23
901
Two 5.3 dia.
or M5 holes
Mounting hole dimensions
165±0.2
456
NOD
ADR
X 10
X1
AUX
PWR
23
901
A
B
A
B
60
175
43.9
27.3
24.3 26.6
Wiring Diagrams
■ Remote I/O Terminals with Transistors
DRT2-MD16 (NPN)
DRT2-MD16-1 (PNP)
24 VDC
24 VDC
4
6
V2
G2
+
Brown
(white)
I/O power supply
Blue
(black)
−
1
3
0
2
5
4
7
6
V1
NC
G1
NC
+
−
Solenoid,etc.
4
V2
6
G2
−
1
3
0
5
2
4
7
6
NC
NC
+
I/O power supply
Solenoid,etc.
Valve,etc.
DRT2-ID08-1 (PNP)
24 VDC
0
3
2
5
4
NC
7
6
NC
NC
NC
NC
NC
V
NC
G
NC
−
Blue
(black)
Brown
(white)
Brown
(red)
Black
(white)
Blue
(black)
+
I/O power supply
1
3
0
2
5
4
NC
7
6
NC
NC
NC
NC
NC
NC
NC
+
I/O power supply
Three-wire sensor with Two-wire sensor
NPN output
(Limit switch, etc.)
(e.g., photoelectric sensor
or proximity sensor)
Brown
(white)
1
Blue
(black)
V
Three-wire sensor with Two-wire sensor
PNP output
(Limit switch, etc.)
(e.g., photoelectric sensor
or proximity sensor)
DRT2-OD08 (NPN)
DRT2-OD08-1 (PNP)
24 VDC
24VDC
V
−
2
7
Three-wire sensor with Two-wire sensor
PNP output
(Limit switch, etc.)
(e.g., photoelectric sensor
or proximity sensor)
24 VDC
G
5
+
Valve, etc.
DRT2-ID08 (NPN)
−
3
0
I/O power supply
I/O power supply
Three-wire sensor with Two-wire sensor
NPN output
(Limit switch, etc.)
(e.g., photoelectric sensor
or proximity sensor)
G
1
Brown
(white)
2
7
Blue
(black)
0
5
Brown
(red)
Black
(white)
Blue
(black)
−
3
Blue
(black)
Black
(white)
Brown
(red)
G1
1
Blue
(black)
Black
(white)
Brown
(red)
V1
1
0
3
2
5
4
NC
7
6
+
NC
NC
NC
NC
NC
V
NC
G
NC
−
1
0
3
2
5
4
NC
7
6
NC
NC
NC
NC
NC
NC
NC
+
I/O power supply
I/O power supply
Solenoid,etc.
Valve,etc.
Solenoid,etc.
Valve,etc.
DRT2-Series Smart Slave
17
■ MIL Connector Terminals with Transistors
DRT2-ID16ML(X)
DRT2-ID16ML(X)-1
24 VDC
DRT2-ID16MLX(-1)/DRT2-OD16MLX(-1)
Wiring Diagram for Enclosed Cable (with Connectors)
24 VDC
XG4M-2030-T
(mating portion side)
XG4M-2030-T
(mating portion side)
Triangle
mark
mch
00
mch
01
mch
02
mch
03
mch
04
mch
05
mch
06
mch
07
mch
08
mch
09
mch
10
mch
11
mch
12
mch
13
mch
14
mch
15
4
G
2
V
20
18
16
14
12
10
8
6
19
20
17
18
15
16
8
6
G
3
4
G
G
3
V
1
2
V
V
1
18
G
3
2
V
V
1
L
14
L
12
L
10
L
8
L
6
18 17
5
20 19
mch
08
mch
09
mch
10
mch
11
mch
12
mch
13
mch
14
mch
15
4
G
G
3
2
V
V
1
L
L
18
15
L
L
16
13
L
L
14
11
L
L
12
9
L
L
10
7
L
L
8
5
L
L
6
DRT2-Series Smart Slave
3
14 13
7
mch
00
mch
01
mch
02
mch
03
mch
04
mch
05
mch
06
mch
07
17
1
4
9
18 17
20 19
100 mm
DRT2-OD16ML(X)-1
20
2
12 11
24 VDC
G
16
14 13
5
4
L
12 11
7
L
3
11
10
L
1
4
13
9
19
2
15
14
mch
08
mch
09
mch
10
mch
11
mch
12
mch
13
mch
14
mch
15
18
17
12
mch
00
mch
01
mch
02
mch
03
mch
04
mch
05
mch
06
mch
07
L
19
11
24 VDC
20
mch
08
mch
09
mch
10
mch
11
mch
12
mch
13
mch
14
mch
15
13
DRT2-OD16ML(X)
L
mch
00
mch
01
mch
02
mch
03
mch
04
mch
05
mch
06
mch
07
Triangle
mark
19
L
17
L
15
L
13
L
11
L
9
L
7
L
5
L
■ Standard Environment-resistive Terminals and Environment-resistive Terminals with Transistors
3
4
Input 2
1
2
NC
V
2
NC
3
G
4
Input 1
1
Blue (black)
I/O power supply 24 VDC
1
NC
V
2
NC
3
V
Two-wire sensor
(Limit switch, etc.)
1
DRAIN
V+
4
Input 3
1
3
4
2
4
24V
G
Input 0
1
G
3
4
2
NC
V
2
NC
3
1
4
V
G
Input 1
I/O power supply 24 VDC
Two-wire sensor
(Limit switch, etc.)
Three-wire sensor with NPN output
(e.g., photoelectric sensor or proximity sensor)
DRT2-OD04CL (NPN)
Input 2
1
NC
V
2
NC
3
V
G
4
Input 3
1
Three-wire sensor
with PNP output (e.g.,
photoelectric sensor
or proximity sensor)
DRT2-OD04CL-1 (PNP)
CAN L
CAN L
1
DRAIN
G
1
NC
2
Brown (red)
2
4
24V
V
CAN H 5
4
3
Brown (red)
G
Blue (black)
Input 0
NC
3
2
V+
4
0V
2
V−
1
NC
Blue (black)
1
DRAIN
3
CAN H 5
4
Black (white)
G
NC
3
Black (white)
3
CAN L
V−
Brown (white)
CAN H 5
4
DRT2-ID04CL-1 (PNP)
0V
2
Blue (black)
CAN L
Brown (white)
DRT2-ID04CL (NPN)
2
V−
3
NC
1
3
24V
4
NC
3
4
Output 2
0V
2
V+
Output 0
NC
3
4
NC
2
1
2
V
NC
NC
2
3
NC
2
1
4
NC
V
NC
Output 1
V
1
1
1
DRAIN
V
3
CAN H 5
4
3
2
V−
NC
1
3
24V
2
V+
Output 0
G
3
4
G
3
4
Output 2
0V
4
NC
NC
2
NC
NC
2
1
NC
4
Output 3
1
2
1
NC
NC
G
NC
2
3
1
NC
4
Output 3
3
4
Output 1
NC
G
I/O power supply
I/O power supply
Solenoid valve, etc.
Solenoid valve, etc.
Solenoid valve, etc.
Solenoid valve, etc.
DRT2-Series Smart Slave
19
DRT2-ID08CL (NPN)
CAN L
0V
2
V−
3
G
NC
3
G
Input 0
3
4
3
G
Input 2
4
G
Input 4
3
4
Input 6
V+
2
4
24V
1
2
NC
V
2
NC
3
1
4
V
G
1
NC
V
2
NC
3
1
4
V
Input 1
2
G
2
V
2
NC
3
1
4
V
Input 3
G
V
2
NC
3
V
Input 5
Blue (black)
1
NC
Brown (white)
I/O power supply 24 VDC
1
NC
Two-wire sensor
(Limit switch, etc.)
G
4
Input 7
1
Brown (red)
2
1
DRAIN
4
1
NC
Blue (black)
3
Black (white)
CAN H 5
4
Three-wire sensor with NPN output
(e.g., photoelectric sensor or proximity sensor)
DRT2-ID08CL-1 (PNP)
CAN L
0V
2
V−
G
NC
3
3
G
3
4
Input 2
G
3
4
Input 4
G
3
4
Input 6
2
4
24V
1
2
NC
V
2
NC
3
1
4
V
G
Input 1
1
NC
V
2
NC
3
1
4
V
2
G
Input 3
Blue (black)
I/O power supply 24 VDC
1
2
NC
V
2
NC
3
1
4
V
G
Input 5
1
NC
V
2
NC
3
V
Two-wire sensor
(Limit switch, etc.)
G
4
Input 7
1
Brown (red)
V+
Input 0
Blue (black)
2
1
DRAIN
4
1
NC
Black (white)
3
Brown (white)
CAN H 5
4
Three-wire sensor with PNP output
(e.g., photoelectric sensor or proximity sensor)
DRT2-OD08CL (NPN)
CAN L
CAN H 5
4
1
DRAIN
3
2
V−
NC
1
3
24V
NC
3
2
V+
4
Output 0 NC
4
3
Output 2 NC
3
Output 4
4
NC
3
1
NC
4
Output 6
0V
4
NC
2
NC
NC
2
V
1
1
2
NC
V
3
NC
1
NC
2
3
1
4
4
Output 1
V
2
NC
V
NC
NC
2
Output 3 V
1
3
V
NC
4
Output 5
2
NC
2
V
1
1
V
3
NC
4
Output 7
I/O power supply
Solenoid valve, etc.
20
DRT2-Series Smart Slave
Solenoid valve, etc.
DRT2-OD08CL-1 (PNP)
CAN L
CAN H 5
4
3
2
V−
NC
G
1
3
24V
2
1
DRAIN
V+
Output 0
3
4
2
NC
1
NC
output 2
G
3
Output 4
4
G
4
3
G
3
Output 6
4
0V
4
NC
NC
2
4
1
NC
2
G
3
1
NC
2
NC
1
4
Output 3
NC
NC
1
NC
2
1
NC
G
3
NC
2
3
4
Output 5
1
NC
4
Output 7
G
NC
2
G
3
1
Output 1 NC
2
NC
NC
I/O power supply
Solenoid valve, etc.
Solenoid valve, etc.
DRT2-HD16CL (NPN)
CAN L
3
0V
2
V−
G
NC
3
3
4
G
Input 0
3
4
G
Input 4
Input 8
4
3
G
3
4
Input 12
1
NC
2
1
4
2
Input 7
G
V
I/O power supply 24 VDC
3
Input 11
2
G
4
Input 6
1
Blue (black)
Input 2
2
Input 9
V
1
V
2
Input 13
3
Input 15
2
G
4
Input 10
1
V
1
V
3
G
4
1
Input 14
Brown (red)
3
V
1
Blue (black)
2
NC
Input 3
V
2
Input 5
V
Black (white)
1
Brown (red)
2
Input 1
4
24V
Blue (black)
V+
Black (white)
1
DRAIN
Brown (white)
CAN H 5
4
Three-wire sensor with Three-wire sensor with NPN output
(e.g., photoelectric sensor or
NPN output
proximity sensor)
(e.g., photoelectric sensor
or proximity sensor)
Two-wire sensor
(Limit switch, etc.)
DRT2-HD16CL-1 (PNP)
CAN L
0V
2
3
V−
G
NC
3
4
Input 0
G
3
4
Input 4
G
Input 8
4
3
G
3
4
Input 12
1
NC
2
4
I/O power supply 24 VDC
2
Input 7
3
1
4
Input 2
V
G
Input 6
Two-wire sensor
(Limit switch, etc.)
1
Input 11
2
V
2
Input 13
V
3
Input 15
2
G
4
Input 10
1
1
V
Three-wire sensor with
PNP output (e.g.,
photoelectric sensor or
proximity sensor)
V
3
G
4
Input 14
1
Brown (red)
1
G
2
Input 9
V
Black (white)
3
1
Blue (black)
2
NC
Input 3
V
2
Input 5
V
Brown (red)
1
Blue (black)
2
Input 1
4
24V
Black (white)
V+
Blue (black)
1
DRAIN
3
Brown (white)
CAN H 5
4
Three-wire sensor with
PNP output (e.g.,
photoelectric sensor or
proximity sensor)
DRT2-Series Smart Slave
21
DRT2-WD16CL (NPN)
CAN L
CAN H 5
4
3
2
V−
NC
1
3
24V
2
1
DRAIN
V+
Output 0 NC
4
3
NC
3
4
Output 4 NC
3
Output 8
4
NC
3
4
Output 12
0V
2
Output 1
4
NC
1
Output 3
2
V
2
Output 5
V
3
NC
Output 7
2
4
1
1
V
Output 2
1
V
2
Output 9
3
Output 11
2
NC
4
1
Output 6 V
1
V
3
NC
4
Output 10
2
Output 13
1
V
Output 15
2
V
1
NC
3
4
Output 14
I/O power supply
Solenoid valve, etc.
Solenoid valve, etc.
DRT2-WD16CL-1 (PNP)
CAN L
CAN H 5
4
3
2
V−
NC
G
1
3
24V
2
1
DRAIN
V+
3
4
Output 0
Output 4
G
3
4
G
3
Output 8
4
G
3
4
Output 12
0V
2
Output 1
4
NC
1
NC
Output 3
2
3
4
1
NC
G
2
Output 5
1
Output 7
2
NC
2
Output 9
G
Output 11
2
3
1
Output 2 NC
4
Output 6
1
NC
1
NC
G
3
4
Output 10
2
Output 13
1
NC
Output 15
2
1
NC
G
3
4
Output 14
I/O power supply
Solenoid valve, etc.
Solenoid valve, etc.
DRT2-MD16CL (NPN)
CAN L
CAN H 5
4
1
DRAIN
3
V−
G1
2
V2
3
1
G2
2
V+
4
V1
Input 0
4
G1
3
2
Input 1
1
Input 3
2
24 V for outputs
V1
3
G1
3
2
Input 5
1
V1
Input 7
2
3
1
V1
4
Input 2
1
V1
Input 4
4
NC
G1
4
Input 6
NC
3
2
Output 1
Output 3
2
1
V2
Output 4
4
1
3
V2
NC
4
Output 2
NC
3
2
Output 5
Output 7
2
1
V2
4
1
OUT4
V2
NC
3
4
Output 6
Two-wire sensor
(Limit switch, etc.)
22
Brown (red)
Blue (black)
Black (white)
Brown (white)
I/O power supply
Blue (black)
24 V for inputs
Three-wire sensor with
NPN output (e.g.,
photoelectric sensor or
proximity sensor)
DRT2-Series Smart Slave
Solenoid valve, etc.
Solenoid valve, etc.
DRT2-MD16CL-1 (PNP)
CAN L
G1
2
V2
3
1
G2
2
4
V1
2
Input 1
1
Input 3
2
24 V for outputs
3
2
Input 5
V1
3
1
V1
Input 7
2
G1
3
1
V1
4
Input 2
1
V1
Input 4
4
NC
G1
4
Input 6
G2
3
2
Output 1
Output 3
2
1
NC
Output 0
4
1
NC
2
Output 5
3
Output 7
2
4
Output 2
1
NC
G2
OUT4
4
G2
3
1
NC
G2
3
4
Output 6
I/O power supply
Two-wire sensor
(Limit switch, etc.)
Brown (red)
24 V for inputs
Blue (black)
V+
Input 0
4
G1
3
Black (white)
V−
Brown (white)
1
DRAIN
3
Blue (black)
CAN H 5
4
Solenoid valve, etc.
Solenoid valve, etc.
Three-wire sensor with
PNP output (e.g.,
photoelectric sensor or
proximity sensor)
DRT2-Series Smart Slave
23
Applicable Cables
■ MIL Connectors with Transistors
●Connector-Terminal Block Conversion Unit and Connecting
Cable (16 Points)
Cables with Connectors (1:1)
Model
Applicable
cable
DRT2-ID16ML
DRT2-ID16ML-1
DRT2-OD16ML
DRT2-OD16ML-1
G79-O@C
Connected Relay
Terminal
XW2D-20G6
XW2B-20G5
XW2B-20G4
XW2C-20G6-IO16
Remarks
Connector
Terminal Block
Conversion Unit
●I/O Relay Terminal Connector Cables (16 Points)
Cables with Connectors (1:1)
Applicable
cable
Model
DRT2-ID16ML
G79-I@C
DRT2-ID16ML-1
DRT2-OD16ML
G7TC-ID16
G7TC-IA16
Remarks
For I/O Relay
Terminal inputs
---
---
(No applicable
models)
G79-O@C
G7TC-OC16/OC08
G70D-SOC16/VSOC16
G70D-FOM16/VFOM16
G70A-ZOC16-3
G70D-SOC08
G70R-SOC08
For I/O Relay
Terminal
outputs
G79-I@C
G7TC-OC16-1
For I/O Relay
Terminal
outputs
G79-O@C
G70D-SOC16-1
G70D-FOM16-1
G70A-Z0C16-4
For I/O Relay
Terminal
outputs
DRT2-OD16ML-1
24
Connected Relay
Terminal
DRT2-Series Smart Slave
●Cables with Loose Wires with Crimp Terminals
Model
DRT2-ID16ML
DRT2-ID16ML-1
DRT2-OD16ML
DRT2-OD16ML-1
Applicable cable
G79A-Y@C-D1
Remarks
20-pole connector/
bundled cable (with
crimp-style terminals)
conversion cable
●Cables with Loose Wires
Model
DRT2-ID16ML
DRT2-ID16ML-1
DRT2-OD16ML
DRT2-OD16ML-1
Applicable cable
G79A-A@C-D1
Remarks
20-pole connector/
bundled cable
conversion cable
List of Models
●DRT2-series Smart Slaves
Product name
Remote I/O Basic
Terminals with Transistors
Remote I/O Terminal
Expansion Units with
Transistors
Remote I/o Terminals with
3-tier Terminal Blocks with
Transistors
Shape
Model
DRT2-ID16
16 inputs, NPN ( + common)
DRT2-ID16-1
DRT2-OD16
16 inputs, PNP ( − common)
16 outputs, NPN ( − common)
DRT2-OD16-1
16 outputs, PNP ( + common)
8 inputs/8 outputs with NPN, + common for inputs, − common for
outputs
DRT2-MD16
DRT2-MD16-1
8 inputs/8 outputs with PNP, − common for inputs, + common for
outputs
DRT2-ID08
DRT2-ID08-1
8 inputs, NPN ( + common)
8 inputs, PNP ( − common)
DRT2-OD08
DRT2-OD08-1
8 outputs, NPN ( − common)
8 outputs, PNP ( + common)
XWT-ID08
XWT-ID08-1
8 inputs for terminals with NPN, + common
8 inputs for terminals with PNP, − common
XWT-OD08
8 outputs for terminals with NPN, − common
XWT-OD08-1
8 outputs for terminals with PNP, + common
XWT-ID16
XWT-ID16-1
16 inputs for terminals with NPN, + common
16 inputs for terminals with PNP, − common
XWT-OD16
16 outputs for terminals with NPN, − common
XWT-OD16-1
16 outputs for terminals with PNP, + common
DRT2-ID16TA
DRT2-ID16TA-1
16 inputs with NPN, + common
16 inputs with PNP, − common
DRT2-OD16TA
16 outputs with NPN, − common
16 outputs with PNP, + common
DRT2-OD16TA-1
DRT2-MD16TA
DRT2-MD16TA-1
32 inputs with NPN, + common
32 inputs with PNP, − common
DRT2-OD32ML
32 outputs with NPN, − common
32 outputs with PNP, + common
DRT2-MD32ML
Board Terminals with MIL
Connectors (horizontal
mounting)
Board Terminals with MIL
Connectors (vertical
mounting)
DRT2-ID16ML
DRT2-ID16ML-1
16 inputs with PNP, − common
DRT2-OD16ML
16 outputs with NPN, − common
DRT2-OD16ML-1
DRT2-ID16MLX
16 outputs with PNP, + common
16 inputs with NPN, + common, cable with connectors: 10 cm
DRT2-ID16MLX-1
16 inputs with PNP, − common, cable with connectors: 10 cm
DRT2-OD16MLX
16 outputs with NPN, − common, cable with connectors: 10 cm
DRT2-OD16MLX-1
16 outputs with PNP, + common, cable with connectors: 10 cm
DRT2-ROS16
16 outputs
DRT2-ID32B
DRT2-ID32B-1
32 inputs, NPN ( + common)
32 inputs, PNP ( − common)
DRT2-OD32B
DRT2-OD32B-1
32 outputs, NPN ( − common)
32 outputs, PNP ( + common)
DRT2-MD32B
16 inputs/16 outputs, NPN (inputs: + common/outputs: − common)
16 inputs/16 outputs, PNP (inputs: − common/outputs: + common)
DRT2-ID32BV
DRT2-ID32BV-1
32 inputs, NPN ( + common)
32 inputs, PNP ( − common)
DRT2-OD32BV
32 outputs, NPN ( − common)
32 outputs, PNP ( + common)
DRT2-MD32BV
DRT2-MD32BV-1
UC, CE
UC, CE
UC, CE
UC, CE
UR, CE
DRT2-MD32B-1
DRT2-OD32BV-1
Approved
standards
16 inputs/16 outputs with NPN, + common for inputs, − common for
outputs
16 inputs/16 outputs with PNP, − common for inputs, + common for
outputs
16 inputs with NPN, + common
DRT2-MD32ML-1
Remote I/O Terminals with
Relay Outputs
8 inputs/8 outputs with NPN, + common for inputs, − common for
outputs
8 inputs/8 outputs with PNP, − common for inputs, + common for
outputs
DRT2-ID32ML
DRT2-ID32ML-1
DRT2-OD32ML-1
MIL Connector Terminals
with Transistors
Specifications
U, CE
U, CE
16 inputs/16 outputs, NPN (inputs: + common/outputs: − common)
16 inputs/16 outputs, PNP (inputs: − common/outputs: + common)
DRT2-Series Smart Slave
25
Product name
Shape
Model
DRT2-ID32SLH
32 inputs, NPN ( + common) with detection functions
DRT2-ID32SLH-1
32 inputs, PNP ( − common) with detection functions
32 outputs, NPN ( − common) with detection functions
DRT2-OD32SLH
DRT2-OD32SLH-1
DRT2-MD32SLH
Screw-less Clamp
Terminals with Transistors
16 inputs/16 outputs, PNP (inputs: − common/outputs:
+ common) with detection functions
DRT2-ID32SL
DRT2-ID32SL-1
32 inputs, NPN ( + common) without detection functions
32 inputs, PNP ( − common) without detection functions
DRT2-OD32SL
32 outputs, NPN ( − common) without detection function
32 outputs, PNP ( + common) without detection function
DRT2-MD32SL
DRT2-MD32SL-1
Environment-resistive
Terminals with Transistors
8 inputs, NPN ( + common) with detection functions
8 inputs, PNP ( − common) with detection functions
DRT2-OD08C
8 outputs, NPN ( − common) with detection functions
DRT2-OD08C-1
8 outputs, PNP ( + common) with detection functions
DRT2-HD16C
DRT2-HD16C-1
16 inputs, NPN ( + common) with detection functions
16 inputs, PNP ( − common) with detection functions
DRT2-ID04CL
DRT2-ID04CL-1
4 inputs, NPN ( + common) without detection functions
4 inputs, PNP ( − common) without detection functions
DRT2-OD04CL
4 outputs, NPN ( − common) without detection functions
DRT2-OD04CL-1
4 outputs, PNP ( + common) without detection functions
DRT2-ID08CL
8 inputs, NPN ( + common) without detection functions
DRT2-ID08CL-1
8 inputs, PNP ( − common) without detection functions
ÅDRT2-OD08CL
8 outputs, NPN ( − common) without detection functions
DRT2-OD08CL-1
8 outputs, PNP ( + common) without detection functions
DRT2-HD16CL
DRT2-HD16CL-1
16 inputs, NPN ( + common) without detection functions
16 inputs, PNP ( − common) without detection functions
DRT2-WD16CL
16 outputs, NPN ( − common) without detection functions
DRT2-WD16CL-1
16 outputs, PNP ( + common) without detection functions
DRT2-MD16CL
8 inputs/8 outputs, NPN (inputs: + common/outputs: − common)
without detection function
DRT2-ID16S
8 inputs/8 outputs, PNP (inputs: − common/outputs: + common)
without detection function
16 inputs, NPN ( + common)
e-con Connector
Terminals
DRT2-ID16S-1
DRT2-MD16S
16 inputs, PNP ( − common)
8 inputs/8 outputs, NPN (inputs: + common/outputs:− common)
DRT2-MD16S-1
8 inputs/8 outputs, PNP (inputs: − common/outputs: + common)
Analog Input Terminals
DRT2-AD04
DRT2-AD04H
4 inputs (resolution: 6,000)
4 inputs (resolution: 30,000)
Analog Output Terminals
DRT2-DA02
2 outputs
Temperature Input
Terminals with
Thermocouple Inputs
DRT2-TS04T
4 inputs
Temperature Input
Terminals with
Resistance-thermometer
Inputs
26
UC, CE
16 inputs/16 outputs, NPN (inputs: + common/outputs:
− common) without detection function
16 inputs/16 outputs, PNP (inputs: − common/outputs:
+ common) without detection function
DRT2-ID08C
DRT2-ID08C-1
DRT2-MD16CL-1
Approved
standards
32 outputs, PNP ( + common) with detection functions
16 inputs/16 outputs, NPN (inputs: + common/outputs:
− common) with detection functions
DRT2-MD32SLH-1
DRT2-OD32SL-1
Environment-resistive
Terminals with Transistors
Specifications
UC, CE
UC, CE
UC, CE
UC, CE
UC, CE
U, CE
DRT2-TS04P
DRT2-Series Smart Slave
4 inputs
●Intelligent Slaves
Product name
Shape
Model
Specifications
Approved
standards
E5ZN-DRT
DeviceNet Communications Unit for E5ZN
E5ZN-SCT24S
Terminal Unit
E5ZN-SDL
Setting Display Unit
Multi-function Compact
Inverter
3G3MV-PDRT2
Communications Unit for 3G3MV Inverters
U, CE
High-function Generalpurpose Inverters
3G3RV-PDRT2
3G3RV/3G3FV DeviceNet Communications Card
U, CE
Modular Temperature
Controllers
---
---
DRT2-Series Smart Slave
27
Terms and Conditions of Sale
1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed
part of all quotes, agreements, purchase orders, acknowledgments, price lists,
catalogs, manuals, brochures and other documents, whether electronic or in
writing, relating to the sale of products or services (collectively, the "Products")
by Omron Electronics LLC and its subsidiary companies (“Omron”). Omron
objects to any terms or conditions proposed in Buyer’s purchase order or other
documents which are inconsistent with, or in addition to, these Terms.
2. Prices; Payment Terms. All prices stated are current, subject to change without notice by Omron. Omron reserves the right to increase or decrease prices
on any unshipped portions of outstanding orders. Payments for Products are
due net 30 days unless otherwise stated in the invoice.
3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices
sent to Buyer after deducting transportation charges, taxes and duties, and will
be allowed only if (i) the invoice is paid according to Omron’s payment terms
and (ii) Buyer has no past due amounts.
4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month or
the maximum legal rate, whichever is less, on any balance not paid within the
stated terms.
5. Orders. Omron will accept no order less than $200 net billing.
6. Governmental Approvals. Buyer shall be responsible for, and shall bear all
costs involved in, obtaining any government approvals required for the importation or sale of the Products.
7. Taxes. All taxes, duties and other governmental charges (other than general
real property and income taxes), including any interest or penalties thereon,
imposed directly or indirectly on Omron or required to be collected directly or
indirectly by Omron for the manufacture, production, sale, delivery, importation, consumption or use of the Products sold hereunder (including customs
duties and sales, excise, use, turnover and license taxes) shall be charged to
and remitted by Buyer to Omron.
8. Financial. If the financial position of Buyer at any time becomes unsatisfactory
to Omron, Omron reserves the right to stop shipments or require satisfactory
security or payment in advance. If Buyer fails to make payment or otherwise
comply with these Terms or any related agreement, Omron may (without liability and in addition to other remedies) cancel any unshipped portion of Products sold hereunder and stop any Products in transit until Buyer pays all
amounts, including amounts payable hereunder, whether or not then due,
which are owing to it by Buyer. Buyer shall in any event remain liable for all
unpaid accounts.
9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation
unless Buyer indemnifies Omron against all related costs or expenses.
10. Force Majeure. Omron shall not be liable for any delay or failure in delivery
resulting from causes beyond its control, including earthquakes, fires, floods,
strikes or other labor disputes, shortage of labor or materials, accidents to
machinery, acts of sabotage, riots, delay in or lack of transportation or the
requirements of any government authority.
11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron:
a. Shipments shall be by a carrier selected by Omron; Omron will not drop ship
except in “break down” situations.
b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall
constitute delivery to Buyer;
c. All sales and shipments of Products shall be FOB shipping point (unless otherwise stated in writing by Omron), at which point title and risk of loss shall
pass from Omron to Buyer; provided that Omron shall retain a security interest in the Products until the full purchase price is paid;
d. Delivery and shipping dates are estimates only; and
e. Omron will package Products as it deems proper for protection against normal handling and extra charges apply to special conditions.
12. Claims. Any claim by Buyer against Omron for shortage or damage to the
Products occurring before delivery to the carrier must be presented in writing
to Omron within 30 days of receipt of shipment and include the original transportation bill signed by the carrier noting that the carrier received the Products
from Omron in the condition claimed.
13. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the
Products will be free from defects in materials and workmanship for a period of
twelve months from the date of sale by Omron (or such other period expressed
in writing by Omron). Omron disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION,
EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL-
14.
15.
16.
17.
18.
ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS.
BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR
INTENDED USE. Omron further disclaims all warranties and responsibility of
any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form
originally shipped with Buyer responsible for labor charges for removal or
replacement thereof) the non-complying Product, (ii) repair the non-complying
Product, or (iii) repay or credit Buyer an amount equal to the purchase price of
the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding
the Products unless Omron’s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by
Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the
use of Products in combination with any electrical or electronic components,
circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing,
are not to be construed as an amendment or addition to the above warranty.
See http://oeweb.omron.com or contact your Omron representative for published information.
Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE
FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY
WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS
BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual
price of the Product on which liability is asserted.
Indemnities. Buyer shall indemnify and hold harmless Omron Companies and
their employees from and against all liabilities, losses, claims, costs and
expenses (including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Omron is a party) which arises
or is alleged to arise from Buyer's acts or omissions under these Terms or in
any way with respect to the Products. Without limiting the foregoing, Buyer (at
its own expense) shall indemnify and hold harmless Omron and defend or settle any action brought against such Companies to the extent based on a claim
that any Product made to Buyer specifications infringed intellectual property
rights of another party.
Property; Confidentiality. Any intellectual property in the Products is the exclusive property of Omron Companies and Buyer shall not attempt to duplicate it
in any way without the written permission of Omron. Notwithstanding any
charges to Buyer for engineering or tooling, all engineering and tooling shall
remain the exclusive property of Omron. All information and materials supplied
by Omron to Buyer relating to the Products are confidential and proprietary,
and Buyer shall limit distribution thereof to its trusted employees and strictly
prevent disclosure to any third party.
Export Controls. Buyer shall comply with all applicable laws, regulations and
licenses regarding (i) export of products or information; (iii) sale of products to
“forbidden” or other proscribed persons; and (ii) disclosure to non-citizens of
regulated technology or information.
Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any right
and no course of dealing between Buyer and Omron shall operate as a waiver
of rights by Omron. (b) Assignment. Buyer may not assign its rights hereunder
without Omron's written consent. (c) Law. These Terms are governed by the
law of the jurisdiction of the home office of the Omron company from which
Buyer is purchasing the Products (without regard to conflict of law principles). (d) Amendment. These Terms constitute the entire agreement between
Buyer and Omron relating to the Products, and no provision may be changed
or waived unless in writing signed by the parties. (e) Severability. If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate
any other provision. (f) Setoff. Buyer shall have no right to set off any amounts
against the amount owing in respect of this invoice. (g) Definitions. As used
herein, “including” means “including without limitation”; and “Omron Companies” (or similar words) mean Omron Corporation and any direct or indirect
subsidiary or affiliate thereof.
Certain Precautions on Specifications and Use
1. Suitability of Use. Omron Companies shall not be responsible for conformity
with any standards, codes or regulations which apply to the combination of the
Product in the Buyer’s application or use of the Product. At Buyer’s request,
Omron will provide applicable third party certification documents identifying
ratings and limitations of use which apply to the Product. This information by
itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application
or use. Buyer shall be solely responsible for determining appropriateness of
the particular Product with respect to Buyer’s application, product or system.
Buyer shall take application responsibility in all cases but the following is a
non-exhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Use in consumer products or any use in significant quantities.
(iii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations.
(iv) Systems, machines and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to this Product.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT
ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO
2.
3.
4.
5.
ADDRESS THE RISKS, AND THAT THE OMRON’S PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
Programmable Products. Omron Companies shall not be responsible for the
user’s programming of a programmable Product, or any consequence thereof.
Performance Data. Data presented in Omron Company websites, catalogs
and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron’s
test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations
of Liability.
Change in Specifications. Product specifications and accessories may be
changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for
your application. Please consult with your Omron’s representative at any time
to confirm actual specifications of purchased Product.
Errors and Omissions. Information presented by Omron Companies has been
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors or omissions.
MEMO
28
Terms and Conditions of Sale
1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed
part of all quotes, agreements, purchase orders, acknowledgments, price lists,
catalogs, manuals, brochures and other documents, whether electronic or in
writing, relating to the sale of products or services (collectively, the "Products")
by Omron Electronics LLC and its subsidiary companies (“Omron”). Omron
objects to any terms or conditions proposed in Buyer’s purchase order or other
documents which are inconsistent with, or in addition to, these Terms.
2. Prices; Payment Terms. All prices stated are current, subject to change without notice by Omron. Omron reserves the right to increase or decrease prices
on any unshipped portions of outstanding orders. Payments for Products are
due net 30 days unless otherwise stated in the invoice.
3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices
sent to Buyer after deducting transportation charges, taxes and duties, and will
be allowed only if (i) the invoice is paid according to Omron’s payment terms
and (ii) Buyer has no past due amounts.
4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month or
the maximum legal rate, whichever is less, on any balance not paid within the
stated terms.
5. Orders. Omron will accept no order less than $200 net billing.
6. Governmental Approvals. Buyer shall be responsible for, and shall bear all
costs involved in, obtaining any government approvals required for the importation or sale of the Products.
7. Taxes. All taxes, duties and other governmental charges (other than general
real property and income taxes), including any interest or penalties thereon,
imposed directly or indirectly on Omron or required to be collected directly or
indirectly by Omron for the manufacture, production, sale, delivery, importation, consumption or use of the Products sold hereunder (including customs
duties and sales, excise, use, turnover and license taxes) shall be charged to
and remitted by Buyer to Omron.
8. Financial. If the financial position of Buyer at any time becomes unsatisfactory
to Omron, Omron reserves the right to stop shipments or require satisfactory
security or payment in advance. If Buyer fails to make payment or otherwise
comply with these Terms or any related agreement, Omron may (without liability and in addition to other remedies) cancel any unshipped portion of Products sold hereunder and stop any Products in transit until Buyer pays all
amounts, including amounts payable hereunder, whether or not then due,
which are owing to it by Buyer. Buyer shall in any event remain liable for all
unpaid accounts.
9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation
unless Buyer indemnifies Omron against all related costs or expenses.
10. Force Majeure. Omron shall not be liable for any delay or failure in delivery
resulting from causes beyond its control, including earthquakes, fires, floods,
strikes or other labor disputes, shortage of labor or materials, accidents to
machinery, acts of sabotage, riots, delay in or lack of transportation or the
requirements of any government authority.
11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron:
a. Shipments shall be by a carrier selected by Omron; Omron will not drop ship
except in “break down” situations.
b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall
constitute delivery to Buyer;
c. All sales and shipments of Products shall be FOB shipping point (unless otherwise stated in writing by Omron), at which point title and risk of loss shall
pass from Omron to Buyer; provided that Omron shall retain a security interest in the Products until the full purchase price is paid;
d. Delivery and shipping dates are estimates only; and
e. Omron will package Products as it deems proper for protection against normal handling and extra charges apply to special conditions.
12. Claims. Any claim by Buyer against Omron for shortage or damage to the
Products occurring before delivery to the carrier must be presented in writing
to Omron within 30 days of receipt of shipment and include the original transportation bill signed by the carrier noting that the carrier received the Products
from Omron in the condition claimed.
13. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the
Products will be free from defects in materials and workmanship for a period of
twelve months from the date of sale by Omron (or such other period expressed
in writing by Omron). Omron disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION,
EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL-
14.
15.
16.
17.
18.
ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS.
BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR
INTENDED USE. Omron further disclaims all warranties and responsibility of
any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form
originally shipped with Buyer responsible for labor charges for removal or
replacement thereof) the non-complying Product, (ii) repair the non-complying
Product, or (iii) repay or credit Buyer an amount equal to the purchase price of
the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding
the Products unless Omron’s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by
Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the
use of Products in combination with any electrical or electronic components,
circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing,
are not to be construed as an amendment or addition to the above warranty.
See http://www.omron247.com or contact your Omron representative for published information.
Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE
FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY
WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS
BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual
price of the Product on which liability is asserted.
Indemnities. Buyer shall indemnify and hold harmless Omron Companies and
their employees from and against all liabilities, losses, claims, costs and
expenses (including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Omron is a party) which arises
or is alleged to arise from Buyer's acts or omissions under these Terms or in
any way with respect to the Products. Without limiting the foregoing, Buyer (at
its own expense) shall indemnify and hold harmless Omron and defend or settle any action brought against such Companies to the extent based on a claim
that any Product made to Buyer specifications infringed intellectual property
rights of another party.
Property; Confidentiality. Any intellectual property in the Products is the exclusive property of Omron Companies and Buyer shall not attempt to duplicate it
in any way without the written permission of Omron. Notwithstanding any
charges to Buyer for engineering or tooling, all engineering and tooling shall
remain the exclusive property of Omron. All information and materials supplied
by Omron to Buyer relating to the Products are confidential and proprietary,
and Buyer shall limit distribution thereof to its trusted employees and strictly
prevent disclosure to any third party.
Export Controls. Buyer shall comply with all applicable laws, regulations and
licenses regarding (i) export of products or information; (iii) sale of products to
“forbidden” or other proscribed persons; and (ii) disclosure to non-citizens of
regulated technology or information.
Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any right
and no course of dealing between Buyer and Omron shall operate as a waiver
of rights by Omron. (b) Assignment. Buyer may not assign its rights hereunder
without Omron's written consent. (c) Law. These Terms are governed by the
law of the jurisdiction of the home office of the Omron company from which
Buyer is purchasing the Products (without regard to conflict of law principles). (d) Amendment. These Terms constitute the entire agreement between
Buyer and Omron relating to the Products, and no provision may be changed
or waived unless in writing signed by the parties. (e) Severability. If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate
any other provision. (f) Setoff. Buyer shall have no right to set off any amounts
against the amount owing in respect of this invoice. (g) Definitions. As used
herein, “including” means “including without limitation”; and “Omron Companies” (or similar words) mean Omron Corporation and any direct or indirect
subsidiary or affiliate thereof.
Certain Precautions on Specifications and Use
1. Suitability of Use. Omron Companies shall not be responsible for conformity
with any standards, codes or regulations which apply to the combination of the
Product in the Buyer’s application or use of the Product. At Buyer’s request,
Omron will provide applicable third party certification documents identifying
ratings and limitations of use which apply to the Product. This information by
itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application
or use. Buyer shall be solely responsible for determining appropriateness of
the particular Product with respect to Buyer’s application, product or system.
Buyer shall take application responsibility in all cases but the following is a
non-exhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Use in consumer products or any use in significant quantities.
(iii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations.
(iv) Systems, machines and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to this Product.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT
ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO
2.
3.
4.
5.
ADDRESS THE RISKS, AND THAT THE OMRON’S PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
Programmable Products. Omron Companies shall not be responsible for the
user’s programming of a programmable Product, or any consequence thereof.
Performance Data. Data presented in Omron Company websites, catalogs
and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron’s
test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations
of Liability.
Change in Specifications. Product specifications and accessories may be
changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for
your application. Please consult with your Omron’s representative at any time
to confirm actual specifications of purchased Product.
Errors and Omissions. Information presented by Omron Companies has been
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors or omissions.
Note: This datasheet is provided as a guideline for selecting products. Do not use this document to operate the Unit.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ELECTRONICS LLC • THE AMERICAS HEADQUARTERS
Schaumburg, IL USA • 847.843.7900 • 800.556.6766 • www.omron247.com
OMRON CANADA, INC. • HEAD OFFICE
OMRON ARGENTINA • SALES OFFICE
Toronto, ON, Canada • 416.286.6465 • 866.986.6766 • www.omron247.com
Cono Sur • 54.11.4783.5300
OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICE
OMRON CHILE • SALES OFFICE
São Paulo, SP, Brasil • 55.11.2101.6300 • www.omron.com.br
Santiago • 56.9.9917.3920
OMRON ELECTRONICS MEXICO SA DE CV • HEAD OFFICE
OTHER OMRON LATIN AMERICA SALES
Apodaca, N.L. • 52.811.156.99.10 • 001.800.556.6766 • [email protected]
54.11.4783.5300
© 2009 Omron Electronics LLC
Cat. No.R110-E1-05
1/07
Specifications are subject to change without notice.
Printed in U.S.A.