RD2006FR Ordering number : ENA1832A SANYO Semiconductors DATA SHEET RD2006FR Diffused Junction Silicon Diode Ultrahigh-Speed Switching Diode Features • • • • VF=1.75V max (IF=20A) VRRM=600V trr=21ns (typ.) Halogen free compliance Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Repetitive Peak Reverse Voltage VRRM Average Output Current Surge Forward Current IO IFSM Junction Temperature Tj Storage Temperature Tstg Conditions Ratings DC bias Sine wave, 10ms single pulse A °C --55 to +150 °C Product & Package Information • Package : TO-220F-2FS • JEITA, JEDEC : SC-67 • Minimum Packing Quantity : 50pcs./magazine RD2006FR-H 4.7 Marking Electrical Connection 2 3.23 RD2006 FR LOT No. 1.28 1 12.98 1.47 MAX 0.8 1 2.76 * 0.8 MAX 15.8 15.87 6.68 3.3 2.54 A 220 unit : mm (typ) 7532-001 10.16 V 20 150 Package Dimensions 3.18 Unit 600 2 0.5 part is not a metal * : This but a resin 5.08 1 : Cathode 2 : Anode SANYO : TO-220F-2FS http://www.sanyosemi.com/en/network/ 91912 TKIM/91510SA TKIM TC-00002488 No. A1832-1/6 RD2006FR Electrical Characteristics at Ta=25°C Parameter Symbol Reverse Voltage VR VF IR Forward Voltage Reverse Current Reverse Recovery Time Thermal Resistance Ratings Conditions min IR=1mA IF=20A typ Unit max 600 V 1.6 trr1 VR=600V IF=10A, di / dt=100A/μs trr2 Rth(j-c) IF=0.5A, IR=1A Between the junction part and the case smoothing current 1.75 V 100 μA 50 ns 21 ns 3.5 °C / W Ordering Information Device RD2006FR-H memo Pb Free and Halogen Free °C C 0° 2 =1 Ta 0 0.5 5 1.0 1.5 (2) (3) (4) 360° 25 Rectangular wave 20 θ 360° 15 (1)Rectangular wave θ=60° (2)Rectangular wave θ=120° (3)Rectangular wave θ=180° (4)Sine wave θ=180° (5)DC 10 5 0 5 0 10 15 20 25 Average Output Current, IO -- A Surge Forward Current, IFSM(Peak) -- A 20ms t 200 180 160 140 120 5 7 0.1 2 3 5 Time, t -- s 7 1.0 2 3 5 7 10 IT15949 100 IT15946 Tc max -- IO (1)Rectangular wave θ=60° (2)Rectangular wave θ=120° (3)Rectangular wave θ=180° (4)Sine wave θ=180° (5)DC 125 100 75 (4) 50 0 (3) (2) 10 5 15 (5) 20 25 Average Output Current, IO -- A IT15948 IFSM -- Pulse Time 450 IS 3 10 1.0 150 25 30 Current waveform 50Hz sine wave 2 2 (1) 220 100 0.01 3 IT15947 IFSM -- t 240 5 (5) Case Temperature, Tc max -- °C 180° 7 175 35 30 100 Reverse Voltage, VR -- V Surge Forward Current, IFSM(Peak) -- A Average Forward Power Dissipation, PF(AV) -- W (1) 2 IT15945 PF(AV) -- IO Sine wave 3 10 0.1 2.0 Forward Voltage, VF -- V 40 f=100kHz 7 25°C Junction Capacitance, Cj -- pF 70 10 7 5 3 2 1.0 7 5 3 2 Cj -- VR 1000 --4 0° C Forward Current, IF -- A Shipping 50pcs./magazine IF -- VF 100 7 5 3 2 0.1 7 5 3 2 0.01 7 5 3 2 0.001 Package TO-220F-2FS IS 400 t 350 300 250 200 150 0 2 4 6 Time, t -- ms 8 10 12 IT15950 No. A1832-2/6 Transient Thermal Resistance, Rth(j-c) -- °C / W RD2006FR Rth(j-c) -- t 10 7 5 3 2 1.0 7 5 3 2 0.1 0.001 2 3 5 70.01 2 3 5 7 0.1 2 3 Time, t -- s 5 7 1.0 2 3 5 7 10 IT15951 No. A1832-3/6 RD2006FR Magazine Specification RD2006FR-H No. A1832-4/6 RD2006FR Outline Drawing RD2006FR-H Mass (g) Unit 1.8 mm * For reference No. A1832-5/6 RD2006FR Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. Regarding monolithic semiconductors, if you should intend to use this IC continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. Please contact us for a confirmation. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of September, 2012. Specifications and information herein are subject to change without notice. PS No. A1832-6/6