STW26NM60 N-CHANNEL 600V - 0.125Ω - 30A TO-247 MDmesh™ MOSFET Table 1: General Features TYPE STW26NM60 ■ ■ ■ ■ ■ Figure 1: Package VDSS RDS(on) ID 600 V < 0.135 Ω 30 A TYPICAL RDS(on) = 0.125 Ω HIGH dv/dt AND AVALANCHE CAPABILITIES IMPROVED ESD CAPABILITY LOW INPUT CAPACITANCE AND GATE CHARGE LOW GATE INPUT RESISTANCE 3 2 1 DESCRIPTION The MDmesh™ is a new revolutionary MOSFET technology that associates the Multiple Drain process with the Company’s PowerMESH™ horizontal layout. The resulting product has an outstanding low on-resistance, impressively high dv/dt and excellent avalanche characteristics. The adoption of the Company’s proprietary strip technique yields overall dynamic performance that is significantly better than that of similar competition’s products. TO-247 Figure 2: Internal Schematic Diagram APPLICATIONS The MDmesh™ family is very suitable for increasing power density of high voltage converters allowing system miniaturization and higher efficiencies. Table 2: Order Codes SALES TYPE MARKING PACKAGE PACKAGING STW26NM60 W26NM60 TO-247 TUBE Rev. 5 February 2005 1/9 STW26NM60 Table 3: Absolute Maximum ratings Symbol VDS VDGR VGS Parameter Drain-source Voltage (VGS = 0) Value Unit 600 V Drain-gate Voltage (RGS = 20 kΩ) 600 V Gate- source Voltage ± 30 V ID Drain Current (continuous) at TC = 25°C 30 A ID Drain Current (continuous) at TC = 100°C 18.9 A IDM () PTOT VESD(G-S) dv/dt (1) Tj Tstg Drain Current (pulsed) 120 A Total Dissipation at TC = 25°C 313 W Derating Factor 2.5 W/°C Gate source ESD(HBM-C=100pF, R=1.5KΩ) Peak Diode Recovery voltage slope Operating Junction Temperature Storage Temperature 6000 V 15 V/ns -55 to 150 °C ( ) Pulse width limited by safe operating area (1) ISD ≤26A, di/dt ≤200A/µs, VDD ≤ V(BR)DSS, Tj ≤ T JMAX. Table 4: Thermal Data Rthj-case Thermal Resistance Junction-case Max 0.4 °C/W Rthj-amb Thermal Resistance Junction-ambient Max 62.5 °C/W Maximum Lead Temperature For Soldering Purpose 300 °C Tl Table 5: Avalanche Characteristics Symbol Parameter Max Value Unit IAR Avalanche Current, Repetitive or Not-Repetitive (pulse width limited by Tj max) 13 A EAS Single Pulse Avalanche Energy (starting Tj = 25 °C, ID = IAR, VDD = 50 V) 740 mJ ELECTRICAL CHARACTERISTICS (TCASE =25°C UNLESS OTHERWISE SPECIFIED) Table 6: Gate-Source Zener Diode Symbol BVGSO Parameter Gate-Source Breakdown Voltage Test Conditions Igss=± 1mA (Open Drain) Min. 30 Typ. Max. Unit V PROTECTION FEATURES OF GATE-TO-SOURCE ZENER DIODES The built-in back-to-back Zener diodes have specifically been designed to enhance not only the device’s ESD capability, but also to make them safely absorb possible voltage transients that may occasionally be applied from gate to source. In this respect the Zener voltage is appropriate to achieve an efficient and cost-effective intervention to protect the device’s integrity. These integrated Zener diodes thus avoid the usage of external components. 2/9 STW26NM60 Table 7: On /Off Symbol Parameter Test Conditions Min. Typ. Max. 600 Unit V(BR)DSS Drain-source Breakdown Voltage ID = 250 µA, VGS = 0 IDSS Zero Gate Voltage Drain Current (VGS = 0) VDS = Max Rating VDS = Max Rating, TC = 125°C 10 100 µA µA IGSS Gate-body Leakage Current (VDS = 0) VGS = ± 20 V ± 10 µA VGS(th) Gate Threshold Voltage VDS = VGS, ID = 250 µA RDS(on Static Drain-source On Resistance VGS = 10 V, ID = 13 A 3 V 4 5 V 0.125 0.135 Ω Typ. Max. Unit Table 8: Dynamic Symbol gfs (1) Parameter Test Conditions Min. Forward Transconductance VDS = 15 V , ID = 13 A 20 S Input Capacitance Output Capacitance Reverse Transfer Capacitance VDS = 25 V, f = 1 MHz, VGS = 0 2900 900 40 pF pF pF Equivalent Output Capacitance VGS = 0 V, VDS = 0 to 400 V 300 pF td(on) tr td(off) tf Turn-on Delay Time Rise Time Turn-off-Delay Time Fall Time VDD = 300 V, ID = 13 A, RG = 4.7 Ω, VGS = 10 V (see Figure 15) 35 22 14 20 ns ns ns ns Qg Qgs Qgd Total Gate Charge Gate-Source Charge Gate-Drain Charge VDD = 480 V, ID = 26 A, VGS = 10 V (see Figure 18) 73 20 37 102 nC nC nC Typ. Max. Unit 26 104 A A 1.5 V Ciss Coss Crss COSS eq (3). Table 9: Source Drain Diode Symbol Parameter ISD ISDM (2) Source-drain Current Source-drain Current (pulsed) VSD (1) Forward On Voltage ISD = 26 A, VGS = 0 Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current ISD = 26 A, di/dt = 100 A/µs VDD = 100V (see Figure 16) 450 7 30.5 ns µC A Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current ISD = 26 A, di/dt = 100 A/µs VDD = 100V, Tj = 150°C (see Figure 16) 560 9 32.5 ns µC A trr Qrr IRRM trr Qrr IRRM Test Conditions Min. (1) Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %. (2) Pulse width limited by safe operating area. (3) Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS. 3/9 STW26NM60 Figure 3: Safe Operating Area Figure 6: Thermal Impedance Figure 4: Output Characteristics Figure 7: Transfer Characteristics Figure 5: Transconductance Figure 8: Static Drain-source On Resistance 4/9 STW26NM60 Figure 9: Gate Charge vs Gate-source Voltage Figure 12: Capacitance Variations Figure 10: Normalized Gate Thereshold Voltage vs Temperature Figure 13: Normalized On Resistance vs Temperature Figure 11: Dource-Drain Diode Forward Characteristics 5/9 STW26NM60 Figure 14: Unclamped Inductive Load Test Circuit Figure 17: Unclamped Inductive Wafeform Figure 15: Switching Times Test Circuit For Resistive Load Figure 18: Gate Charge Test Circuit Figure 16: Test Circuit For Inductive Load Switching and Diode Recovery Times 6/9 STW26NM60 TO-247 MECHANICAL DATA DIM. mm. MIN. TYP inch MAX. MIN. TYP. MAX. A 4.85 5.15 0.19 0.20 A1 2.20 2.60 0.086 0.102 b 1.0 1.40 0.039 0.055 b1 2.0 2.40 0.079 0.094 0.134 b2 3.0 3.40 0.118 c 0.40 0.80 0.015 0.03 D 19.85 20.15 0.781 0.793 E 15.45 15.75 0.608 e 5.45 L 14.20 14.80 0.560 L1 3.70 4.30 0.14 L2 0.620 0.214 18.50 0.582 0.17 0.728 øP 3.55 3.65 0.140 0.143 øR 4.50 5.50 0.177 0.216 S 5.50 0.216 7/9 STW26NM60 Table 10: Revision History 8/9 Date Revision 24-June-2004 04-Feb-2004 4 5 Description of Changes New Stylesheet. No Content Change New Id current on title in first page STW26NM60 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics All other names are the property of their respective owners © 2005 STMicroelectronics - All Rights Reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America 9/9