P D035QU1 V ers ion : 0.4 T E C HNIC AL S P E C IF IC AT ION MODE L NO : P D035QU1 T he content of this information is s ubject to be changed without notice. P leas e contact P V I or its agent for further information. C us tomer•s C onfirmation C us tomer Date By FOR MORE INFORMATION: P V I•s C onfirmation AZ DISPLAYS, INC. 75 COLUMBIA, ALISO VIEJO, CA, 92656 Http://www.AZDISPLAYS.com C onfirmed B y P repared B y T he information contained herein is the exclus ive property of P rime V iew International C o., Ltd. and s hall not be dis tributed, reproduced, or dis clos ed in whole or in part without prior written permis s ion of P rime V iew International C o., Ltd. P AG E :1 PD035QU1 Revision History Rev. 0.1 0.2 Issued Date August, 29, 2008 Set.15.2008 0.3 Set.16.2008 0.4 Oct.21.2008 Revised Contents Preliminary Modify Page 8 7. Absolute Maximum Ratings: Note 7-1 Page 9 8-2) Recommended Driving Condition for Back Light Typ=19.2V change to Typ=19.8V Page 19 17. Reliability Test -30к(30 mins)Ш+80к(30 mins), 200 Cycles change to -20к(30 mins)Ш+70к(30 mins), 100 Cycles Modify Page 8 7.Absolute Maximum Ratings: Page 13 13. Waveform Add Page 8 6. Touch Panel Characteristics The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:2 PD035QU1 TECHNICAL SPECIFICATION CONTENTS NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 ITEM Cover Revision History Contents Application Features Mechanical Specifications Mechanical Drawing of TFT-LCD module Input / Output Terminals Touch Panel Characteristics Absolute Maximum Ratings Electrical Characteristics DC Characteristics AC Characteristics Pixel Arrangement Display Color and Gray Scale Reference Waveform Power On Sequence Optical Characteristics Handling Cautions Reliability Test Block Diagram Packing PAGE 1 2 3 4 4 4 5 6 8 10 11 11 12 13 14 14 18 18 20 21 22 23 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:3 PD035QU1 1. Application This data sheet applies to a color TFT LCD module,PD035QU1.This module applies to OA product, which requires high quality flat panel display. If you must use in severe reliability environments, please don’t extend over PVI’s reliability test conditions. 2. Features . Amorphous silicon TFT LCD panel with LED back-light unit . Pixel in stripe configuration . Slim and compact, designed for O/A application 3. Mechanical Specifications Parameter Screen Size Display Format Active Area Pixel Pitch Pixel Configuration Display Colors Surface Treatment Back-light Outline Dimension Weight Display mode Gray scale inversion direction Specifications 3.45 (diagonal) 320ͪ(RGB)ͪ240 70.08(H)ͪ52.56(V) 0.073(H)ͪ0.219(V) Stripe 16.7M Haze 20% 6-LEDs 76.9(W)Ø63.9 (H)Ø4.4 (D)(typ.) (45) Normally white 6 (ref to Note 15-1) Unit inch dot mm mm mm g o’clock The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:4 PD035QU1 4. Mechanical Drawing of TFT-LCD Module The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:5 PD035QU1 5. Input / Output Terminals 5-1) TFT-LCD Panel Driving Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 Symbol VBLVBLVBL+ VBL+ Y1 X1 NC /RESET SPENA SPCLK SPDAT B0 B1 B2 B3 B4 B5 B6 B7 G0 G1 G2 G3 G4 G5 G6 G7 R0 R1 R2 R3 R4 R5 R6 R7 HSYNC VSYNC DCLK NC NC Vcc Vcc Y2 X2 NC NC NC IF2 IF1 Function Backlight LED Ground Backlight LED Ground Backlight LED Power Backlight LED Power Top electrode Right electrode Note Use Hardware Reset SPI Interface Data Enable Signal SPI Interface Data Clock SPI interface Data Blue Data Bit 0 Blue Data Bit 1 Blue Data Bit 2 Blue Data Bit 3 Blue Data Bit 4 Blue Data Bit 5 Blue Data Bit 6 Blue Data Bit 7 Green Data Bit0 Green Data Bit 1 Green Data Bit 2 Green Data Bit 3 Green Data Bit 4 Green Data Bit 5 Green Data Bit 6 Green Data Bit 7 Red Data Bit 0 / DX 0 Red Data Bit 1/ DX 1 Red Data Bit 2/ DX 2 Red Data Bit 3/ DX 3 Red Data Bit 4/ DX 4 Red Data Bit 5/ DX 5 Red Data Bit 6/ DX 6 Red Data Bit 7/ DX 7 Horizontal Sync Input Vertical Sync Input Dot Data Clock Not Use Not Use Digital Power Digital Power Bottom electrode Left electrode Internal test use Not Use Internal Test Use Control The Input Data Format / Floating Control The Input Data Format Remark Note 5-3 Note 5-3 Note 5-3 Note 5-4 Note 5-4 Note 5-4 Note 5-4 Note 5-4 Note 5-4 Note 5-4 Note 5-4 Note 5-1 Note 5-4,5 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:6 PD035QU1 50 51 52 53 54 IF0 NC DE GND GND Control The Input Data Format Not Use Data Enable Input Ground Ground Note 5-4,5 Note 5-2 Note 5-1:The mode control(IF2) not use, it can’t control CCIR601 interface, If not use CCIR601,it can floating. Note 5-2:For digital RGB input data format, both SYNC mode and DE+SYNC mode are supported. If DE signal is fixed low, SYNC mode is used. Otherwise, DE+SYNC mode is used. Suggest used SYNC mode. Note 5-3:Usually pull high. Note 5-4: IF select serial RGB or CCIR601/656 input mode is selected, only DX0-DX7 used, and the other short to GND, Only selected serial RGBΕCCIR601/656 interface, DX BUS will enable, Digital input mode DX0 is LSB is MSB. Note 5-5:Control the input data format SPI timing Characteristics SPI read timing The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:7 PD035QU1 SPI write timing 6.Touch Panel Characteristics 6.1 Block diagram 6.2 Absolute maximum rating Item Supply voltate Symbol - Condition - Specifications DC 5.0 Unit - The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:8 PD035QU1 6.3 Electrical Characteristics Item Symbol Resistance between RX terminal RY Insulation resistance RINS Conditions DC 25V Min 200 200 20 Typ - Max 900 900 - Unit Ohm Ohm M ohm Note Note 6-1 Note 6-1 Note 6-1 Note 6-1 Linearity 1.5 % Note 6-2 Note 6-3 Chattering 10 max ms Note 6-1 Note 6-1:This specifications applied to only touch panel and calibration is more than 3 points. Note 6-2:Test condition (a)X-axis linearity method VY2-VY1=5V, VOUT=VX2 (b)Y-axis linearity method Vx1-Vx2=5V,VOUT=VY1 Note 6-3: calculation Define linearity Xi as: Linearity Xi=IϦE max I /(Van-VaI) Linearity X=Max(Linearity x1,…..Linearity xn) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:9 PD035QU1 6.4Mechanical &Reliability Characteristics Item Activation force Durability-surface scratching Durability-surface pitting Min Write 100,000 1,000,000 Typ - Max 100 - Unit G Characters Touches Surface hardness 3 - - H Note Note6-4 Note6-5 Note6-6 JIS K5400,ASTM D3363 Note 6-4:Stylus pen Input :R 0.8mm polyacetal pen or finger Note 6-5:Measurement for surface area -100,000 times or over -Writing with R0.8mm plastic stylus pen; writing force 150g in active area. -Speed is 60mm / sec(each direction inside active area 3 mm) Note 6-6:1,000,000 times or over(No damage on film surface) -Pen: point with R 0.8mm silicon rubber -Load:250g -frequency: 240 times/ min -Measurement position:1point of touch penal active area Repeated; over 1,000,000 tiems 7. Absolute Maximum Ratings: Parameters Power Voltage Input Signal Voltage Logic Output Voltage Symbol Condition DVDD,AVDD GND=0 Vin GND=0 Vout GND=0 Min. -0.3 -0.3 -0.3 GND=0V, Ta=25к MAX. Unit Remark 5.0 V VDD+0.3 V Note 7-1 VDD+0.3 V Note 7-1 Note 7-1:Device is subject to be damaged permanently if stresses beyond those absolute maximum ratings listed above 1.TЉ60̓C,90% RH Max TЇ60̓C, absolute humidity shall be less than 90% RH at 60̓C The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:10 PD035QU1 8. Electrical Characteristics 8-1) Recommended Operating Conditions: VSSA=GND=0V, Ta=25к Item Symbol Min. Typ. Max. Unit Remark Power Voltage VCC 3.0 3.3 3.6 V Digital Operation Current Icc 8.6 V Gate On Power VGH 14 15 18 V Gate Off Power VGL -11 -10 -8 V Vcom High Voltage VcomH 3.7 V Note 8-1 Vcom Low Voltage VcomL -1.6 V Note 8-1 6 V Vcom Level max VcomA Note 8-1: VcomH & VcomL : Adjust the color with gamma data. Vp-p should be higher then 4V .(Option 5V) 8-2) Recommended Driving Condition for Back Light Parameter LED current Symbol Power Consumption LED Voltage Note 8-2 :There are 1 Groups LED ˩˕˟ʾʳ Ta=25к Min. - Typ. 20 Max. - Unit V Remark - 400 420 mA 18.6 19.8 21 mW Note 8-2 Rating Typ - Unit Remark 9.DC Characteristics Parameter Symbol Low Level input voltage VIL Min 0 High level input voltage VIH 0.7*VCC - Max 0.3*VCC VCC V V The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:11 PD035QU1 10.AC Characteristics Digital Parallel RGB interface Signal Item Symbol Min Typ Max Frequency Tosc 156 Dclk High Time Tch 78 Low Time Tcl 78 Setup Time Tsu 12 Data Hold Time Thd 12 Period TH 408 Pulse Width THS 5 30 Back-Porch Thb 38 Hsync Display Period TEP 320 Hsync-den time THE 36 68 88 Front-Porch Thf 20 Period Tv 262 Pulse Width Tvs 1 3 5 Vsync Back-Porch Tvb 15 Display Period Tvd 240 Front-porch Tvf 2 4 Note: 1Thp + Thb=68,the user is make up by yourself 2.Tv=Tvs+Tvb+Tvd+Tvf, the user is make up by yourself 3.When SYNC mode is used,1st data start from 68th Dclk after Hsync falling Digital Serial RGB interface Signal Item Symbol Min Typ Max Frequency Tosc 52 Dclk High Time Tch 78 Low Time Tcl 78 Setup Time Tsu 12 Data Hold Time Thd 12 Period TH 1224 Pulse Width THS 5 90 Back-Porch Thb 114 Hsync Display Period TEP 960 Hsync-den time THE 108 204 264 Front-Porch Thf 60 Period Tv 262 Pulse Width Tvs 1 3 5 Vsync Back-Porch Tvb 15 Display Period Tvd 240 Front-porch Tvf 2 4 Note: 1Thp + Thb=204,the user is make up by yourself 2.Tv=Tvs+Tvb+Tvd+Tvf, the user is make up by yourself 3.When SYNC mode is used,1st data start from 204th Dclk after Hsync falling Unit ns ns ns ns ns Tosc Tosc Tosc Tosc Tosc Tosc TH TH TH TH TH Unit ns ns ns ns ns Tosc Tosc Tosc Tosc Tosc Tosc TH TH TH TH TH The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:12 PD035QU1 CCIR601/656 interface Signal Item Frequency Dclk High Time Low Time Setup Time Data Hold Time Symbol Tosc Tch Tcl Tsu Thd Min 12 12 Typ Max 37 78 78 - Unit ns ns ns ns ns 11. Pixel Arrangement R G B R G B R G B 1 st Line RGB R G B R G B 2 nd Line RGB R G B 3 rd Line RGB 1 st Pixel 320th pixel 1 Pixel = R G B RGB 238 th Line RGBRGB RGB 239 thLine RGBRGBRGB 240 th Line RGB RGB The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:13 PD035QU1 12. Display Color and Gray Scale Reference G G pGjGkG pGjGkG jG yG G G nG iG y^G i[GGiZG y^Gy]G y]Gy\G y\Gy[G y[GyZG yZGyYG yYGyXG yXGyWG yWGn^G n^Gn]G n]Gn\G n\Gn[G n[GnZG nZGnYG nYGnXG nXG nWG nWG i^G i^Gi]G i]Gi\G i\Gi[ iZGiYG iYGiXG iXGiWG iWG G i W W W W W W W W W W W W W W W W W W W W W W W W G yG X X X X X X X X W W W W W W W W W W W W W W W W G G nG W W W W W W W W X X X X X X X X W W W W W W W W W W W W W W W W W W W W W W W W X X X X X X X X W W W W W W W W X X X X X X X X X X X X X X X X iG iG j j t X X X X X X X X W W W W W W W W X X X X X X X X X X X X X X X X X X X X X X X X W W W W W W W W ~ X X X X X X X X X X X X X X X X X X X X X X X X G G yG W W W W W W W W W W W W W W W W W W W W W W W W G G yG W W W W W W W X W W W W W W W W W W W W W W W W G G yG W W W W W W X W W W W W W W W W W W W W W W W W G G k ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ yG X X X X X X W X W W W W W W W W W W W W W W W W yG X X X X X X X W W W W W W W W W W W W W W W W W yG X X X X X X X X W W W W W W W W W W W W W W W W G G nG W W W W W W W W W W W W W W W W W W W W W W W W G G nG W W W W W W W W W W W W W W W X W W W W W W W W G G nG W W W W W W W W W W W W W W X W W W W W W W W W G G k ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ nG W W W W W W W W X X X X X X W X W W W W W W W W nG W W W W W W W W X X X X X X X W W W W W W W W W nG W W W W W W W W X X X X X X X X W W W W W W W W G G iG W W W W W W W W W W W W W W W W W W W W W W W W G G iG W W W W W W W W W W W W W W W W W W W W W W W X G G iG W W W W W W W W W W W W W W W W W W W W W W X W G G k ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ ˨ iG W W W W W W W W W W W W W W W W X X X X X X W X iG W W W W W W W W W W W W W W W W X X X X X X X W iG W W W W W W W W W W W W W W W W X X X X X X X X G G G G yG G G G G G G nG G G G G G G iG G G G G G G ˨ i ˨ i ˨ i The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:14 PD035QU1 13. Waveform CLK,DATA and His waveforms in CCIR601 CLK and DATA waveforms in CCIR656 CLK,DATA and De waveforms in Digital Serial RGB CLK,DATA and DE waveforms in Digital Parallel RGB The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:15 PD035QU1 13-1)Standby ON/OFF Control When STB pin is pulled L, blank data is outputted for 5-frames first, form the falling edge of the following VSYNC signal. The blank data would be gray level 255 for normally white LC. 13-2)Clock and Sync waveforms The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:16 PD035QU1 13-3)Reset Timing Chart The RESET input must be held at least 1ms after power is stable The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:17 PD035QU1 14.Power On Sequence VCC->VDD 15. Optical Characteristics Ta = 25к 15-1) Specification: Parameter Viewing Angle Symbol Horizontal Ӱ21, Ӱ22 Ӱ12 Vertical Ӱ11 Contrast Ratio CR Luminance L x y Tr Tf White Chromaticity Rise Fall LED Life Time Response time Condition CRЊ10 At optimized Viewing angle Ӱ=0̓ Ӱ=0̓ Ӱ=0̓ Ӱ=0̓ +25к MIN. 50 40 45 TYP. 60 50 55 300 400 160 0.26 0.28 - 200 0.31 0.33 10 15 50000 MAX. - Unit deg deg deg Remarks Note 15-1 Note 15-2 --0.36 0.38 - cd/ф ms ms hrs Note 15-3 Note 15-4 Note 15-1 : The definitions of viewing angles The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:18 PD035QU1 Note 15-2 : CR Ј Luminance when Testing point is White Luminance when Testing point is Black Contrast Ratio is measured in optimum common electrode voltage. Note 15-3 : The definition of response time : White Black White 100% 90% Brightness 10% 0% Tr Tf Note 15-4 : The “LED Life time “ is defined as the module brightness decrease to 50% original Brightness that the ambient temperature is 25к and ILED =20mA The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:19 PD035QU1 16. Handling Cautions 16-1) Mounting of module A) Please power off the module when you connect the input/output connector. B) Polarizer which is made of soft material and susceptible to flaw must be handled carefully. C)Protective film (Laminator) is applied on surface to protect it against scratches and dirt. 16-2) Precautions in mounting A) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. B) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. C) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. D) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 16-3) Adjusting module A) Adjusting volumes on the rear face of the module have been set optimally before shipment. B) Therefore, do not change any adjusted values. If adjusted values are changed, the specifications described may not be satisfied. 16-4) Others A) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. B) Store the module at a room temperature place. C) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. D) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. E) Observe all other precautionary requirements in handling general electronic components. F) Please adjust the voltage of common electrode as material of attachment by 1 module. 16-5) Polarizer mark The polarizer mark is to describe the direction of view angle film how to mach up with the rubbing direction. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:20 PD035QU1 17. Reliability Test No 1 2 3 4 5 6 Test Item High Temperature Storage Test Low Temperature Storage Test High Temperature Operation Test Low Temperature Operation Test High Temperature & High Humidity Operation Test Thermal Shock Test (non-operating) 7 Vibration Test (non-operating) 8 Shock Test (non-operating) 9 Electrostatic Discharge Test (non-operating) Test Condition Ta = +80к, 240 hrs Ta = -30к, 240 hrs Ta = +70к, 240 hrs Ta = -20к, 240 hrs Ta = +60к, 90%RH, 240 hrs -20кШ+70к, 100 Cycles, 30 min 30 min Frequency:10~550HZ Amplitude: 1.3mm Sweep:1.5G,33.3~400Hz Vibration: Sinusoidal Wave,1Hrs for X,Y,Z direction 100G, 6ms Direction : ̈́X, ̈́Y, ̈́Z Cycle : 3 times Half sinusoidal wave 150pF, 330Ө Air : ±8KV ; Contact : ±6KV Ta: ambient temperature Note : The protective film must be removed before temperature test. [Criteria] 1. The test samples have recovery time for 2 hours at room temperature before the function check. In the standard conditions, there is no display function NG issue occurred. 2. All the cosmetic specifications are judged before the reliability stress. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:21 PD035QU1 18. Block Diagram TBD The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:22 PD035QU1 19. Packing TBD The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:23