PRELIMINARY DATA SHEET NEC's L,S BAND ULTRA SMALL SPDT GaAs MMIC SWITCH UPG2008TK OUTLINE DIMENSIONS (Units in mm) FEATURES • ULTRA SMALL 6 PIN RECESSED LEAD MINI-MOLD PACKAGE: Size: 1.5 x 1.1 x 0.55 mm PACKAGE OUTLINE TK • HIGH ISOLATION: ISOL = 25 dB TYP at f = 2.5 GHz DESCRIPTION NEC's UPG2008TK is a Single Pole Double Throw (SPDT)GaAs MMIC switch, developed for applications in the 0.5 to 2.5 GHz frequency range. This device is housed in NEC's ultra small "TK" plastic surface mount package. This 6 pin recessed lead mini mold package has a footprint that is over 50% smaller than conventional small size SOT-363 package types. Package height is also reduced by 39% by incorporating a flat lead style. These tremendous size reductions make this switch an ideal device for small size portable applications and modules. 0.48±0.05 0.48±0.05 • LOW INSERTION LOSS: LINS = 0.40 dB TYP at f = 1 GHz LINS = 0.60 dB TYP at f = 2.5 GHz NEC's stringent quality assurance and test procedures assure the highest performance. consistency and reliability. APPLICATION • L, S band digital cellular or cordless handsets • PCS, Bluetooth, WLAN, and WLL applications ELECTRICAL CHARACTERISTICS (Unless Otherwise Specified, TA = 25°C, VCONT1 = 2.8 V and VCONT2 = 0 V or VCONT1 = 0V and VCONT2 = 2.8 V, ZO = 50Ω, off chip DC blocking capacitor value, 51pF) PART NUMBER UPG2008TK TK PACKAGE OUTLINE SYMBOLS PARAMETERS AND CONDITIONS UNITS MIN TYP MAX 0.40 0.50 0.60 0.70 0.80 0.85 LINS Insertion Loss f = 0.5 to 1.0 GHz f = 1.0 to 2.0 GHz f = 2.0 to 2.5 GHz dB dB dB ISOL Isolation f = 0.5 to 2.5 GHz dB 22 25 RLIN Input Return Loss f = 0.5 to 2.5 GHz dB 13 20 Output Return Loss f = 0.5 to 2.5 GHz dB 13 RLOUT PIN(0.1dB) PIN(1dB) tsw ICONT Input Power at 0.1 dB Compression f = 1.0 GHz1 dBm Input Power at 1 dB Compression f = 1.0 GHz1 dBm 20 20 20 25 Switching Speed ns 50 Control Current, at VCONT = 2.8 V/0 V, no RF signal µA 0.5 10 Note: 1. PIN(0.1dB) or PIN(1dB) measured the input power level when the insertion loss increases to more than that of the linear range. All other characterisitics are measured in the the linear range. California Eastern Laboratories UPG2008TK ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) SYMBOLS VCONT PIN PARAMETERS UNITS RATINGS V -6.0 to +6.02 SYMBOLS PARAMETERS dBm 28 VCONT(H) Control Voltage High V +2.5 +3.0 +5.3 VCONT(L) Control Voltage Low V -0.2 0 +0.2 Control Voltage Input Power RECOMMENDED OPERATING CONDITIONS (TA = 25°C) PT Total Power Dissipation W 0.15 TOP Operating Temperature °C -45 to +85 TSTG Storage Temperature °C -55 to +150 Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. | VCONT1 – VCONT2 | ≤ 6.0 V UNITS MIN TYP MAX EVALUATION BOARD VC1 6P L2MM SW T.F. for J- Contacts Ver. 1 OUT1 TEST CIRCUIT1 C1 1 2 3 OUT2 C2 6 G2R OUT1 C1 VCONT1 C1 5 C2 IN 4 VCONT2 C1 C1 C2 C2 Note: 1. VCONT1 = 2.8 V, VCONT2 = 0V or VCONT2 = 0 V, VCONT1 = 2.8V, off chip DC blocking capacitors value C1=51pF, C2 = 1000pF (Bypass), Using NEC standard evaluation board. IN C1 OUT2 PIN CONNECTIONS & INTERNAL BLOCK DIAGRAM VC2 PIN CONNECTION DIAGRAM PIN NO. CONNECTION 1 2 GND 3 OUT2 4 5 6 VCONT1 (Top View) 2 3 G2R 1 TRUTH TABLE OF SWITCHING BY CONDITION OF VOLTAGE OUT1 VCONT1 VCONT2 IN-OUT1 IN-OUT2 VCONT2 LOW IN HIGH HIGH ON OFF LOW OFF ON ORDERING INFORMATION (Bottom View) PART NUMBER 6 6 1 5 5 2 4 4 3 UPG2008TK-E2 MARKING G2R QTY 5 kpcs Per Reel Note: 1. Embossed tape, 8 mm wide, Pins 1,2,3 face perforation side. Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. 08/30/2004 A Business Partner of NEC Compound Semiconductor Devices, Ltd.