SN74AVC4T774 4-BIT DUAL-SUPPLY BUS TRANSCEIVER WITH CONFIGURABLE VOLTAGE TRANSLATION AND 3-STATE OUTPUTS www.ti.com SCES693A – FEBRUARY 2008 – REVISED FEBRUARY 2008 FEATURES 1 VCCA 15 VCCB A1 3 14 B1 A2 4 13 B2 A3 5 12 B3 A4 6 11 B4 DIR3 7 10 DIR4 8 9 GND OE 1 16 16 15 14 13 2 15 VCCB A1 3 14 13 B1 B2 B3 B4 GND DIR2 A2 4 A3 12 A4 5 6 DIR3 7 10 11 9 OE DIR4 8 A1 1 12 B1 A2 2 11 B2 A3 3 10 B3 A4 4 9 B4 5 6 7 8 GND 16 2 VCCA 1 VCCB DIR1 DIR2 RSV PACKAGE (TOP VIEW) DIR1 RGY PACKAGE (TOP VIEW) OE PW PACKAGE (TOP VIEW) DIR4 • DIR2 • • • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II ESD Protection Exceeds the Following Levels (tested per JESD 22) – 8000-V Human-Body Model (A114-A) – 250-V Machine Model (A115-A) – 1500-V Charged-Device Model (C101) DIR3 • • VCCA • Each Channel Has an Independent DIR Control Input Control Inputs VIH/VIL Levels Are Referenced to VCCA Voltage Fully Configurable Dual-Rail Design Allows Each Port to Operate Over the Full 1.2-V to 3.6-V Power-Supply Range I/Os Are 4.6-V Tolerant Ioff Supports Partial Power-Down-Mode Operation Typical Data Rates – 380 Mbps (1.8-V to 3.3-V Translation) – 200 Mbps (<1.8-V to 3.3-V Translation) – 200 Mbps (Translate to 2.5 V or 1.8 V) – 150 Mbps (Translate to 1.5 V) – 100 Mbps (Translate to 1.2 V) DIR1 • DESCRIPTION/ORDERING INFORMATION This 4-bit noninverting bus transceiver uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.2 V to 3.6 V. The SN74AVC4T774 is optimized to operate with VCCA/VCCB set at 1.4 V to 3.6 V. It is operational with VCCA/VCCB as low as 1.2 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, and 3.3-V voltage nodes. ORDERING INFORMATION PACKAGE (1) (2) TA –40°C to 85°C TOP-SIDE MARKING QFN – RGY Tape and reel SN74AVC4T774RGYR WT774 QFN – RSV Tape and reel SN74AVC4T774 ZVK Tube SN74AVC4T774PW Tape and reel SN74AVC4T774PWR TSSOP – PW (1) (2) ORDERABLE PART NUMBER WT774 Package drawings, thermal data, and symbolization are available at www.ti.com/packaging. For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI website at www.ti.com. 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2008, Texas Instruments Incorporated SN74AVC4T774 4-BIT DUAL-SUPPLY BUS TRANSCEIVER WITH CONFIGURABLE VOLTAGE TRANSLATION AND 3-STATE OUTPUTS www.ti.com SCES693A – FEBRUARY 2008 – REVISED FEBRUARY 2008 DESCRIPTION/ORDERING INFORMATION (CONTINUED) The SN74AVC4T774 is designed for asynchronous communication between data buses. The logic levels of the direction-control (DIR) input and the output-enable (OE) input activate either the B-port outputs or the A-port outputs or place both output ports in the high-impedance mode. The device transmits data from the A bus to the B bus when the B outputs are activated, and from the B bus to the A bus when the A outputs are activated. The input circuitry on both A and B ports is always active and must have a logic HIGH or LOW level applied to prevent excess ICC and ICCZ. The SN74AVC4T774 is designed so that the control pins (DIR1, DIR2, DIR3, DIR4, and OE) are supplied by VCCA. This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. The VCC isolation feature ensures that if either VCC input is at GND, then both ports are in the high-impedance state. To ensure the high-impedance state during power up or power down, OE should be tied to VCCA through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. Since this device has CMOS inputs, it is very important to not allow them to float. If the inputs are not driven to either a high VCC state, or a low GND state, an undesirable larger than expected ICC current may result. Since the input voltage settlement is governed by many factors (e.g. capacitance, board-layout, package inductance, surrounding conditions, etc.), ensuring that they these inputs are kept out of erroneous switching states and tying them to either a high or a low level minimizes the leakage-current. FUNCTION TABLE (Each Bit) CONTROL INPUTS OE OUTPUT CIRCUITS OPERATION DIR A PORT B PORT L L Enabled Hi-Z B data to A data L H Hi-Z Enabled A data to B data H X Hi-Z Hi-Z Isolation LOGIC DIAGRAM (POSITIVE LOGIC)(1) DIR1 OE A1 B1 (1) 2 Shown for a single channel Submit Documentation Feedback Copyright © 2008, Texas Instruments Incorporated Product Folder Link(s): SN74AVC4T774 SN74AVC4T774 4-BIT DUAL-SUPPLY BUS TRANSCEIVER WITH CONFIGURABLE VOLTAGE TRANSLATION AND 3-STATE OUTPUTS www.ti.com SCES693A – FEBRUARY 2008 – REVISED FEBRUARY 2008 TYPICAL APPLICATION 3.0 V 1.8 V 0.1 µF 0.1 µF VCCB VCCA MOSI SPI Port MISO CLK Processor CS A1 B1 A2 B2 A3 B3 A4 B4 SPI Peripheral OE SN74AVC4T774 GND DIR1 = HIGH DIR2 = LOW DIR3 = HIGH DIR4 = HIGH Figure 1. Typical Application of the SN74AVC4T774 ABSOLUTE MAXIMUM RATINGS (1) over operating free-air temperature range (unless otherwise noted) MIN MAX –0.5 4.6 I/O ports (A port) –0.5 4.6 I/O ports (B port) –0.5 4.6 Control inputs –0.5 4.6 A port –0.5 4.6 B port –0.5 4.6 A port –0.5 VCCA + 0.5 B port –0.5 VCCB + 0.5 VCCA Supply voltage range VCCB UNIT V VI Input voltage range (2) VO Voltage range applied to any output in the high-impedance or power-off state (2) VO Voltage range applied to any output in the high or low state (2) (3) IIK Input clamp current VI < 0 –50 mA IOK Output clamp current VO < 0 –50 mA IO Continuous output current Continuous current through VCCA, VCCB, or GND Tstg (1) (2) (3) Storage temperature range. –65 V V V ±50 mA ±100 mA 150 °C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. The input voltage and output negative-voltage ratings may be exceeded if the input and output current ratings are observed. The output positive-voltage rating may be exceeded up to 4.6 V maximum if the output current rating is observed. Submit Documentation Feedback Copyright © 2008, Texas Instruments Incorporated Product Folder Link(s): SN74AVC4T774 3 SN74AVC4T774 4-BIT DUAL-SUPPLY BUS TRANSCEIVER WITH CONFIGURABLE VOLTAGE TRANSLATION AND 3-STATE OUTPUTS www.ti.com SCES693A – FEBRUARY 2008 – REVISED FEBRUARY 2008 PACKAGE THERMAL IMPEDANCE UNIT PW package θJA (1) (2) Package thermal impedance (1) 108 RGY package (2) 39 RSV package (1) 184 °C/W The package thermal impedance is calculated in accordance with JESD 51-7. The package thermal impedance is calculated in accordance with JESD 51-5. RECOMMENDED OPERATING CONDITIONS (1) (2) (3) VCCI VCCO MIN MAX UNIT VCCA Supply voltage 1.2 3.6 V VCCB Supply voltage 1.2 3.6 V High-level input voltage VIH Low-level input voltage VIL High-level input voltage VIH VIL Low-level input voltage VI Input voltage VO Output voltage IOH Data inputs (4) Data inputs DIR (referenced to VCCA) (5) (DIRx, OE) DIR (referenced to VCCA) (5) (DIRx, OE) 2 V 1.2 V to 1.95 V VCCI × 0.35 1.95 V to 2.7 V 0.7 2.7 V to 3.6 V 0.8 1.2 V to 1.95 V VCCA × 0.65 1.95 V to 2.7 V 1.6 2.7 V to 3.6 V 2 1.2 V to 1.95 V VCCA × 0.35 1.95 V to 2.7 V 0.7 2.7 V to 3.6 V 3-state 0 3.6 Operating free-air temperature V 0.8 3.6 Low-level output current V V VCCO TA 4 1.6 2.7 V to 3.6 V 0 Input transition rise or fall rate (4) (5) 1.95 V to 2.7 V Active state Δt/Δv (1) (2) (3) VCCI × 0.65 0 High-level output current IOL (4) 1.2 V to 1.95 V 1.1 V to 1.2 V –3 1.4 V to 1.6 V –6 1.65 V to 1.95 V –8 2.3 V to 2.7 V –9 3 V to 3.6 V –12 1.1 V to 1.2 V 3 1.4 V to 1.6 V 6 1.65 V to 1.95 V 8 2.3 V to 2.7 V 9 3 V to 3.6 V 12 –40 V V mA mA 5 ns/V 85 °C VCCI is the VCC associated with the input port. VCCO is the VCC associated with the output port. All unused data inputs of the device must be held at VCCI or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. For VCCI values not specified in the data sheet, VIH min = VCCI × 0.7 V, VIL max = VCCI × 0.3 V For VCCA values not specified in the data sheet, VIH min = VCCA × 0.7 V, VIL max = VCCA × 0.3 V Submit Documentation Feedback Copyright © 2008, Texas Instruments Incorporated Product Folder Link(s): SN74AVC4T774 SN74AVC4T774 4-BIT DUAL-SUPPLY BUS TRANSCEIVER WITH CONFIGURABLE VOLTAGE TRANSLATION AND 3-STATE OUTPUTS www.ti.com SCES693A – FEBRUARY 2008 – REVISED FEBRUARY 2008 ELECTRICAL CHARACTERISTICS (1) (2) (3) over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS IOH = –100 µA VOH VCCB TA = 25°C MIN TYP 1.2 V to 3.6 V 1.2 V to 3.6 V 1.2 V 1.4 V 1.4 V 1.05 1.65 V 1.65 V 1.2 IOH = –9 mA 2.3 V 2.3 V 1.75 IOH = –12 mA 3V 3V 2.3 VI = VIH 0.2 1.2 V 1.2 V IOL = 6 mA 1.4 V 1.4 V 0.35 1.65 V 1.65 V 0.45 IOL = 9 mA 2.3 V 2.3 V 0.55 IOL = 12 mA 3V 3V 0.7 II Ioff A or B port VI or VO = 0 to 3.6 V IOZ A or B port VI = VCCA or GND VO = VCCO or GND, VI = VCCI or GND, OE = VIH 1.2 V to 3.6 V 1.2 V to 3.6 V 0.25 ±0.025 ±0.25 ±1 0V 0 V to 3.6 V ±0.1 ±1 ±5 0 V to 3.6 V 0V ±0.1 ±1 ±5 3.6 V 3.6 V ±0.5 ±2.5 ±5 1.2 V to 3.6 V 1.2 V to 3.6 V VI = VCCI or GND, IO = 0 VI = VCCI or GND, IO = 0 VI = VCCI or GND, IO = 0 Ci Control inputs Cio A or B port VO = 3.3 V or GND (2) (3) VI = 3.3 V or GND V µA µA µA 8 0V 0 V to 3.6 V –2 0 V to 3.6 V 0V 8 1.2 V to 3.6 V 1.2 V to 3.6 V (1) V IOL = 3 mA VI = VIL UNIT 0.95 1.2 V to 3.6 V 1.2 V to 3.6 V Control inputs ICCA + ICCB MAX VCCO – 0.2 1.2 V IOL = 8 mA ICCB MIN IOH = –6 mA IOL = 100 µA ICCA –40°C to 85°C MAX IOH = –3 mA IOH = –8 mA VOL VCCA µA 8 0V 0 V to 3.6 V 8 0 V to 3.6 V 0V –2 1.2 V to 3.6 V 1.2 V to 3.6 V µA 16 µA 3.3 V 3.3 V 2.5 3 pF 3.3 V 3.3 V 5 6 pF All unused control inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. VCCO is the VCC associated with the output port. VCCI is the VCC associated with the input port. Submit Documentation Feedback Copyright © 2008, Texas Instruments Incorporated Product Folder Link(s): SN74AVC4T774 5 SN74AVC4T774 4-BIT DUAL-SUPPLY BUS TRANSCEIVER WITH CONFIGURABLE VOLTAGE TRANSLATION AND 3-STATE OUTPUTS www.ti.com SCES693A – FEBRUARY 2008 – REVISED FEBRUARY 2008 SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, VCCA = 1.2 V (unless otherwise noted) (see Figure 2) PARAMETER FROM (INPUT) TO (OUTPUT) A B B A OE A OE B OE A OE B tPLH tPHL tPLH tPHL tPZH tPZL tPZH tPZL tPHZ tPLZ tPHZ tPLZ VCCB = 1.2 V VCCB = 1.5 V ± 0.1 V VCCB = 1.8 V ± 0.15 V VCCB = 2.5 V ± 0.2 V VCCB = 3.3 V ± 0.3 V TYP TYP TYP TYP TYP 3.5 2.8 2.7 2.7 3.1 3.5 2.8 2.7 2.7 3.1 3.8 3.4 3.2 3 2.9 3.8 3.4 3.2 3 2.9 6 4.8 4.4 5.3 9.3 6 4.8 4.4 5.3 9.3 6.7 6.7 6.6 6.7 6.6 6.7 6.7 6.6 6.7 6.6 4.3 3.6 3.7 3.3 4 4.3 3.6 3.7 3.3 4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 UNIT ns ns ns ns ns ns SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, VCCA = 1.5 V ± 0.1 V (see Figure 2) PARAMETER tPLH tPHL tPLH tPHL tPZH tPZL tPZH tPZL tPHZ tPLZ tPHZ tPLZ 6 FROM (INPUT) TO (OUTPUT) A B B A OE A OE B OE A OE B VCCB = 1.2 V VCCB = 1.5 V ± 0.1 V VCCB = 1.8 V ± 0.15 V VCCB = 2.5 V ± 0.2 V VCCB = 3.3 V ± 0.3 V TYP MIN MAX MIN MAX MIN MAX MIN MAX 3.1 0.3 4.4 0.2 3.9 0.1 3.6 0.1 3.9 3.1 0.3 4.4 0.2 3.9 0.1 3.6 0.1 3.9 2.9 0.6 5.1 0.4 4.9 0.2 4.6 0.1 4.5 2.9 0.6 5.1 0.4 4.9 0.2 4.6 0.1 4.5 5.3 1.1 7.1 0.9 6.2 0.7 5.5 0.1 6.4 5.3 1.1 7.1 0.9 6.2 0.7 5.5 0.1 6.4 4.4 1.1 8.2 1.1 8.2 1.1 8.2 1.1 8.2 4.4 1.1 8.2 1.1 8.2 1.1 8.2 1.1 8.2 3.6 1.2 4.8 0.8 5.4 0.4 5.1 1 5.4 3.6 1.2 4.8 0.8 5.4 0.4 5.1 1 5.4 3.1 0.3 5.6 0.2 5.7 0.3 5.6 0.3 56 3.1 0.3 5.6 0.2 5.7 0.3 5.6 0.3 5.6 Submit Documentation Feedback UNIT ns ns ns ns ns ns Copyright © 2008, Texas Instruments Incorporated Product Folder Link(s): SN74AVC4T774 SN74AVC4T774 4-BIT DUAL-SUPPLY BUS TRANSCEIVER WITH CONFIGURABLE VOLTAGE TRANSLATION AND 3-STATE OUTPUTS www.ti.com SCES693A – FEBRUARY 2008 – REVISED FEBRUARY 2008 SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, VCCA = 1.8 V ± 0.15 V (see Figure 2) PARAMETER tPLH tPHL tPLH tPHL tPZH tPZL tPZH tPZL tPHZ tPLZ tPHZ tPLZ FROM (INPUT) TO (OUTPUT) A B B A OE A OE B OE A OE B VCCB = 1.2 V VCCB = 1.5 V ± 0.1 V VCCB = 1.8 V ± 0.15 V VCCB = 2.5 V ± 0.2 V VCCB = 3.3 V ± 0.3 V TYP MIN MAX MIN MAX MIN MAX MIN MAX 2.8 0.1 4.1 0.1 3.6 0.1 3.1 0.1 3.3 2.8 0.1 4.1 0.1 3.6 0.1 3.1 0.1 3.3 2.6 0.4 4.3 0.1 4.1 0.1 3.8 0.1 3.7 2.6 0.4 4.3 0.1 4.1 0.1 3.8 0.1 3.7 5 0.8 6.7 0.6 5.8 0.4 4.8 0.3 4.6 5 0.8 6.7 0.6 5.8 0.4 4.8 0.3 4.6 3.3 0.2 6.7 0.2 6.6 0.2 6.7 0.2 6.7 3.3 0.2 6.7 0.2 6.6 0.2 6.7 0.2 6.7 3.4 0.7 4.7 0.3 5.1 0.1 4.5 0.8 5 3.4 0.7 4.7 0.3 5.1 0.1 4.5 0.8 5 2.9 0.1 5.7 0.1 5.8 0.1 5.8 0.1 5.8 2.9 0.1 5.7 0.1 5.8 0.1 5.8 0.1 5.8 UNIT ns ns ns ns ns ns SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, VCCA = 2.5 V ± 0.2 V (see Figure 2) PARAMETER tPLH tPHL tPLH tPHL tPZH tPZL tPZH tPZL tPHZ tPLZ tPHZ tPLZ FROM (INPUT) TO (OUTPUT) A B B A OE A OE B OE A OE B VCCB = 1.2 V VCCB = 1.5 V ± 0.1 V VCCB = 1.8 V ± 0.15 V VCCB = 2.5 V ± 0.2 V VCCB = 3.3 V ± 0.3 V TYP MIN MAX MIN MAX MIN MAX MIN MAX 2.6 0.1 3.8 0.1 3.2 0.1 2.7 0.1 2.6 2.6 0.1 3.8 0.1 3.2 0.1 2.7 0.1 2.6 2.5 0.5 3.4 0.2 3.1 0.1 2.8 0.1 2.6 2.5 0.5 3.4 0.2 3.1 0.1 2.8 0.1 2.6 4.7 0.7 6.2 0.5 5.2 0.3 4.1 0.3 3.6 4.7 0.7 6.2 0.5 5.2 0.3 4.1 0.3 3.6 2.3 0.4 4.5 0.4 4.5 0.4 4.5 0.4 4.5 2.3 0.4 4.5 0.4 4.5 0.4 4.5 0.4 4.5 3 0.2 4.3 0.1 4.9 0.1 4 0.7 4.3 3 0.2 4.3 0.1 4.9 0.1 4 0.7 4.3 1.9 01 4.7 0.1 4.6 0.1 4.7 0.1 4.7 1.9 01 4.7 0.1 4.6 0.1 4.7 0.1 4.7 Submit Documentation Feedback Copyright © 2008, Texas Instruments Incorporated Product Folder Link(s): SN74AVC4T774 UNIT ns ns ns ns ns ns 7 SN74AVC4T774 4-BIT DUAL-SUPPLY BUS TRANSCEIVER WITH CONFIGURABLE VOLTAGE TRANSLATION AND 3-STATE OUTPUTS www.ti.com SCES693A – FEBRUARY 2008 – REVISED FEBRUARY 2008 SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, VCCA = 3.3 V ± 0.3 V (see Figure 2) PARAMETER FROM (INPUT) TO (OUTPUT) A B B A OE A OE B OE A OE B tPLH tPHL tPLH tPHL tPZH tPZL tPZH tPZL tPHZ tPLZ tPHZ tPLZ VCCB = 1.2 V VCCB = 1.5 V ± 0.1 V VCCB = 1.8 V ± 0.15 V VCCB = 2.5 V ± 0.2 V VCCB = 3.3 V ± 0.3 V TYP MIN MAX MIN MAX MIN MAX MIN MAX 2.5 0.1 3.6 0.1 3 0.1 2.6 0.1 2.4 2.5 0.1 3.6 0.1 3 0.1 2.6 0.1 2.4 2.6 0.5 3.4 0.2 2.9 0.1 2.5 0.1 2.3 2.6 0.5 3.4 0.2 2.9 0.1 2.5 0.1 2.3 4.5 0.9 5.9 0.5 5 0.3 3.8 0.3 3.3 3.8 0.9 5.9 0.5 5 0.3 3.8 0.3 3.3 1.9 0.4 3.6 0.4 3.6 0.4 3.6 0.4 3.6 1.9 0.4 3.6 0.4 3.6 0.4 3.6 0.4 3.6 2.7 0.1 4.2 0.1 4.6 0.3 3.8 0.7 3.9 2.7 0.1 4.2 0.1 4.6 0.3 3.8 0.7 3.9 2.3 0.1 4.5 0.1 4.5 0.1 4.6 0.1 4.6 2.3 0.1 4.5 0.1 4.5 0.1 4.6 0.1 4.6 UNIT ns ns ns ns ns ns OPERATING CHARACTERISTICS TA = 25°C VCCA = VCCB = 1.2 V VCCA = VCCB = 1.5 V VCCA = VCCB = 1.8 V VCCA = VCCB = 2.5 V VCCA = VCCB = 3.3 V TYP TYP TYP TYP TYP 3 3 3 3 4 1 1 1 2 2 12 13 14 15 17 Outputs disabled 2 2 2 2 2 Outputs enabled 12 13 14 16 17 2 2 2 2 2 3 3 3 3 4 1 1 1 2 2 PARAMETER A to B CpdA (1) B to A A to B CpdB (1) B to A (1) 8 TEST CONDITIONS Outputs enabled Outputs disabled Outputs enabled Outputs disabled Outputs enabled CL = 0, f = 10 MHz, tr = tf = 1 ns UNIT pF CL = 0, f = 10 MHz, tr = tf = 1 ns pF Outputs disabled Power dissipation capacitance per transceiver Submit Documentation Feedback Copyright © 2008, Texas Instruments Incorporated Product Folder Link(s): SN74AVC4T774 SN74AVC4T774 4-BIT DUAL-SUPPLY BUS TRANSCEIVER WITH CONFIGURABLE VOLTAGE TRANSLATION AND 3-STATE OUTPUTS www.ti.com SCES693A – FEBRUARY 2008 – REVISED FEBRUARY 2008 PARAMETER MEASUREMENT INFORMATION 2 × VCCO S1 RL From Output Under Test Open GND CL (see Note A) TEST S1 tpd tPLZ/tPZL tPHZ/tPZH Open 2 × VCCO GND RL tw LOAD CIRCUIT VCCI VCCI/2 Input VCCO CL RL VTP 1.2 V 1.5 V ± 0.1 V 1.8 V ± 0.15 V 2.5 V ± 0.2 V 3.3 V ± 0.3 V 15 pF 15 pF 15 pF 15 pF 15 pF 2 kΩ 2 kΩ 2 kΩ 2 kΩ 2 kΩ 0.1 V 0.1 V 0.15 V 0.15 V 0.3 V VCCI/2 0V VOLTAGE WAVEFORMS PULSE DURATION VCCA Output Control (low-level enabling) VCCA/2 VCCA/2 0V tPZL VCCI Input VCCI/2 VCCI/2 0V tPLH Output tPHL VOH VCCO/2 VOL VCCO/2 tPLZ VCCO Output Waveform 1 S1 at 2 × VCCO (see Note B) VCCO/2 VOL + VTP VOL tPZH tPHZ Output Waveform 2 S1 at GND (see Note B) VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES VCCO/2 VOH − VTP VOH 0V VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES NOTES: A. CL includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control. C. All input pulses are supplied by generators having the following characteristics: PRRv10 MHz, ZO = 50 Ω, dv/dt ≥ 1 V/ns. D. The outputs are measured one at a time, with one transition per measurement. E. tPLZ and tPHZ are the same as tdis. F. tPZL and tPZH are the same as ten. G. tPLH and tPHL are the same as tpd. H. VCCI is the VCC associated with the input port. I. VCCO is the VCC associated with the output port. Figure 2. Load and Circuit and Voltage Waveforms Submit Documentation Feedback Copyright © 2008, Texas Instruments Incorporated Product Folder Link(s): SN74AVC4T774 9 PACKAGE OPTION ADDENDUM www.ti.com 14-Mar-2008 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty SN74AVC4T774PW ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74AVC4T774PWG4 ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74AVC4T774PWR ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74AVC4T774PWRG4 ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74AVC4T774RGYR PREVIEW QFN RGY 16 1000 TBD Call TI Call TI SN74AVC4T774RSVR PREVIEW QFN RSV 16 3000 TBD Call TI Call TI Lead/Ball Finish MSL Peak Temp (3) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 19-Mar-2008 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel Diameter Width (mm) W1 (mm) A0 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant SN74AVC4T774PWR TSSOP PW 16 2000 330.0 12.4 7.0 5.6 1.6 8.0 12.0 Q1 SN74AVC4T774RGYR QFN RGY 16 1000 180.0 12.4 3.8 4.3 1.5 8.0 12.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 19-Mar-2008 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74AVC4T774PWR SN74AVC4T774RGYR TSSOP PW 16 2000 346.0 346.0 29.0 QFN RGY 16 1000 190.5 212.7 31.8 Pack Materials-Page 2 MECHANICAL DATA MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999 PW (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE 14 PINS SHOWN 0,30 0,19 0,65 14 0,10 M 8 0,15 NOM 4,50 4,30 6,60 6,20 Gage Plane 0,25 1 7 0°– 8° A 0,75 0,50 Seating Plane 0,15 0,05 1,20 MAX PINS ** 0,10 8 14 16 20 24 28 A MAX 3,10 5,10 5,10 6,60 7,90 9,80 A MIN 2,90 4,90 4,90 6,40 7,70 9,60 DIM 4040064/F 01/97 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. Falls within JEDEC MO-153 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Amplifiers Data Converters DSP Clocks and Timers Interface Logic Power Mgmt Microcontrollers RFID RF/IF and ZigBee® Solutions amplifier.ti.com dataconverter.ti.com dsp.ti.com www.ti.com/clocks interface.ti.com logic.ti.com power.ti.com microcontroller.ti.com www.ti-rfid.com www.ti.com/lprf Applications Audio Automotive Broadband Digital Control Medical Military Optical Networking Security Telephony Video & Imaging Wireless www.ti.com/audio www.ti.com/automotive www.ti.com/broadband www.ti.com/digitalcontrol www.ti.com/medical www.ti.com/military www.ti.com/opticalnetwork www.ti.com/security www.ti.com/telephony www.ti.com/video www.ti.com/wireless Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2008, Texas Instruments Incorporated