HD151005 Octal Inverter Buffers/Drivers With Open Drain High Voltage Outputs ADE-205-594 (Z) 1st. Edition Dec. 2000 Description The HD151005 features octal inverter buffers and drivers with open drain high voltage outputs with N channel power MOSFET. Features • • • • • Wired connection available with open drain outputs Output voltage: 30 V Max Output current: 100 mA Max Ensures VOL 0.4 V when the output current is 48 mA Low power dissipation: 10 µA HD151005 Pin Arrangement OEA 1 20 VCC A1 2 19 YA1 A2 3 18 YA2 A3 4 17 YA3 A4 5 16 YA4 B1 6 15 YB1 B2 7 14 YB2 B3 8 13 YB3 B4 9 12 YB4 OEB 10 11 GND (Top view) Function Table Inputs Outputs Inputs Outputs OEA A YA OEB B YB H L Z H L Z H H L H H L L X Z L X Z H L Z X 2 : : : : High level Low level High impedance Irrelevant HD151005 Absolute Maximum Ratings (Ta = 25°C) Item Symbol Ratings Unit Supply voltage VCC 0.5 to 7.0 V Input voltage VIN –0.5 to VCC + 0.5 V Input Current I IN –10 to +0.1 mA Output voltage VOUT -0.5 to +30 V Output Current I OUT +100 mA/Unit Power Dissipation PT 835 (FP), 1375 (DP) mW Storage Temperature Range Tstg –65 to +150 °C Note: 1. The absolute maximum ratings are values which must not individually be exceeded, and furthermore, no two of which may be realized at the same time. Recommended Operating Conditions Item Symbol Min Typ Max Unit Supply Voltage VCC 4.5 5.0 5.5 V Input Voltage VIN 0 — VCC V Output Voltage VOUT — — 24 V Output Current I OL 0 48 100 mA Operating Temperature Topr 0 25 70 °C Input Voltage VIH 0.7 × V CC — — V VIL — — 0.3 × V CC V t r, t f 0 — 500 ns Input Rise and Fall Time *1 Note: 1. This item guarantees maximum limit when one input switches. Waveform: Refer to test circuit of switching characteristics. 3 HD151005 Electrical Characteristics (Ta = 0 to +70°C) Item Symbol VCC (V) Min Max Unit Conditions Output voltage VOL1 4.5 — 0.2 V I OL = 24 mA, VI = VIH VOL2 4.5 — 0.4 V I OL = 48 mA, VI = VIH VOL3 4.5 — 0.8 V I OL = 100 mA, VI = VIH IO 5.5 — 5 µA VO = 30 V, VI = 0 V I O(off) 0 — 5 µA VO = 30 V VIH 5.0 3.5 — V VO = 0.4 V, IO ≥ 48 mA VIL 5.0 — 1.5 V VO = 30 V, IO ≤ 5 mA II 5.5 — ±1 µA VI = 0 V or VCC I I(off) 0 — ±1 µA VI = 5.5 V I CC 5.5 — 10 µA VI = 0 V or VCC, No Load Output Current Input voltage Input Current Power Supply Currrent Switching Characteristics (Ta = 25°C, VCC = 5 V) Item Symbol Min Typ Max Unit Conditions Propagation Delay Time t ZL — 15 30 ns See next page t LZ — 20 30 ns See next page t THL — 10 30 ns See next page t TLH — 15 30 ns See next page CIN — 7 15 pF See next page Power Dissipation Capacitance CPD — 30 — pF See next page Transition Time Input Capacitance 4 HD151005 Test Circuit VCC VCC Input RL 100 Ω Pulse Generator Output Zout = 50 Ω Note: 1. CL 15 pF CL includes probe and jig capacitance. Waveforms-1 tr A, B OEA, OEB tf 90 % 50 % 5V 90 % 50 % 10 % 10 % t ZL t LZ 90 % 90 % Output Y 50 % 10 % t THL Notes: 1. 2. 0V 50 % 10 % VCC VOL t TLH t r = 5 ns, tf = 5 ns Input waveforms: PRR = 1 MHz, duty cycle 50% 5 HD151005 Package Dimensions Unit: mm 24.50 25.40 Max 1 7.00 Max 11 6.30 20 10 1.30 2.54 ± 0.25 0.48 ± 0.10 0.51 Min 1.27 Max 7.62 2.54 Min 5.08 Max 0.89 + 0.11 0.25 – 0.05 0° – 15° Hitachi Code JEDEC EIAJ Mass (reference value) DP-20N — Conforms 1.26 g Unit: mm 12.6 13 Max 11 1 10 1.27 *0.42 ± 0.08 0.40 ± 0.06 0.10 ± 0.10 0.80 Max *0.22 ± 0.05 0.20 ± 0.04 2.20 Max 5.5 20 0.20 7.80 +– 0.30 1.15 0° – 8° 0.70 ± 0.20 0.15 0.12 M *Dimension including the plating thickness Base material dimension 6 Hitachi Code JEDEC EIAJ Mass (reference value) FP-20DA — Conforms 0.31 g HD151005 Cautions 1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party’s rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi’s sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor products. Hitachi, Ltd. Semiconductor & Integrated Circuits. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109 URL NorthAmerica Europe Asia Japan : : : : http://semiconductor.hitachi.com/ http://www.hitachi-eu.com/hel/ecg http://sicapac.hitachi-asia.com http://www.hitachi.co.jp/Sicd/indx.htm For further information write to: Hitachi Semiconductor (America) Inc. 179 East Tasman Drive, San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe GmbH Electronic Components Group Dornacher Straβe 3 D-85622 Feldkirchen, Munich Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Hitachi Asia Ltd. Hitachi Tower 16 Collyer Quay #20-00, Singapore 049318 Tel : <65>-538-6533/538-8577 Fax : <65>-538-6933/538-3877 URL : http://www.hitachi.com.sg Hitachi Europe Ltd. Electronic Components Group. Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 585160 Hitachi Asia Ltd. (Taipei Branch Office) 4/F, No. 167, Tun Hwa North Road, Hung-Kuo Building, Taipei (105), Taiwan Tel : <886>-(2)-2718-3666 Fax : <886>-(2)-2718-8180 Telex : 23222 HAS-TP URL : http://www.hitachi.com.tw Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre, Harbour City, Canton Road Tsim Sha Tsui, Kowloon, Hong Kong Tel : <852>-(2)-735-9218 Fax : <852>-(2)-730-0281 URL : http://www.hitachi.com.hk Copyright Hitachi, Ltd., 2000. All rights reserved. Printed in Japan. Colophon 2.0 7