HD74HC563/HD74HC573 Octal Transparent Latches (with 3-state outputs) Description When the latch enable (LE) input is high, the Q outputs of HD74HC563 will follow the inversion of the D inputs and the Q outputs of HD74HC573 will follow the D inputs. When the latch enable goes low, data at the D inputs will be retained at the outputs until latch enable returns high again. When a high logic level is applied to the output control input, all outputs go to a high impedance state, regardless of what signals are present at the other inputs and the state of the storage elements. Features • • • • • High Speed Operation: tpd (Data to Q, Q) = 11 ns typ (CL = 50 pF) High Output Current: Fanout of 15 LSTTL Loads Wide Operating Voltage: VCC = 2 to 6 V Low Input Current: 1 µA max Low Quiescent Supply Current: ICC (static) = 4 µA max (Ta = 25°C) Function Table Outputs Output Control Latch Enable Data HD74HC563 HD74HD573 L H H L H L H L H L L L X Q0 Q0 H X X Z Z Q0 : Q0 : level of Q before the indicated Steady-sate input conditions were established. complement of Q 0 or level of Q before the indicated Steady-state input conditions were established. HD74HC563/HD74HC573 Pin Arrangement HD74HC563 Output 1 Control 20 VCC OE D Q 1D 2 2D 3 OE D Q 18 2Q OE D Q 3D 4 4D 5 OE D Q OE D Q OE D Q OE D Q OE D Q 13 7Q 12 8Q GND 10 11 (Top view) 2 15 5Q 14 6Q 7D 8 8D 9 17 3Q 16 4Q 5D 6 6D 7 19 1Q Latch Enable HD74HC563/HD74HC573 HD74HC573 Output 1 Control 20 VCC OE D Q 1D 2 2D 3 OE D Q 18 2Q OE D Q 3D 4 4D 5 OE D Q OE D Q OE D Q 15 5Q 14 6Q OE D Q 7D 8 8D 9 17 3Q 16 4Q 5D 6 6D 7 19 1Q OE D Q 13 7Q 12 8Q GND 10 11 Latch Enable (Top view) Absolute Maximum Ratings Item Symbol Rating Unit Supply voltage range VCC –0.5 to +7.0 V Input voltage VIN –0.5 to VCC + 0.5 V Output voltage VOUT –0.5 to VCC + 0.5 V Output current I OUT ±35 mA DC current drain per VCC , GND I CC, I GND ±75 mA DC input diode current I IK ±20 mA DC output diode current I OK ±20 mA Power Dissipation per package PT 500 mW Storage temperature Tstg –65 to +150 °C 3 HD74HC563/HD74HC573 Block Diagram HD74HC563 1D 2D 3D 4D 5D 6D 7D 8D LE OC 4 D C C Q 1Q D C C Q 2Q D C C Q 3Q D C C Q 4Q D C C Q 5Q D C C Q 6Q D C C Q 7Q D C C Q 8Q HD74HC563/HD74HC573 HD74HC573 1D 2D 3D 4D 5D 6D 7D 8D D C C Q 1Q D C C Q 2Q D C C Q 3Q D C C Q 4Q D C C Q 5Q D C C Q 6Q D C C Q 7Q D C C Q 8Q LE OC 5 HD74HC563/HD74HC573 DC Characteristics Ta = –40 to +85°C Ta = 25°C Item Symbol VCC (V) Min Typ Max Min Max Unit Input voltage VIH 2.0 1.5 — — 1.5 — V 4.5 3.15 — — 3.15 — 6.0 4.2 — — 4.2 — 2.0 — — 0.5 — 0.5 4.5 — — 1.35 — 1.35 6.0 — — 1.8 — 1.8 2.0 1.9 2.0 — 1.9 — 4.5 4.4 4.5 — 4.4 — 6.0 5.9 6.0 — 5.9 — 4.5 4.18 — — 4.13 — I OH = –6 mA 6.0 5.68 — — 5.63 — I OH = –7.8 mA 2.0 — 0.0 0.1 — 0.1 4.5 — 0.0 0.1 — 0.1 6.0 — 0.0 0.1 — 0.1 4.5 — — 0.26 — 0.33 I OL = 6 mA 6.0 — — 0.26 — 0.33 I OL = 7.8 mA VIL Output voltage VOH VOL Test Conditions V V V Vin = VIH or VIL I OH = –20 µA Vin = VIH or VIL I OL = 20 µA Off-state output current I OZ 6.0 — — ±0.5 — ±5.0 µA Vin = VIH or VIL, Vout = VCC or GND Input current Iin 6.0 — — ±0.1 — ±1.0 µA Vin = VCC or GND Quiescent supply current I CC 6.0 — — 4.0 40 µA Vin = VCC or GND, Iout = 0 µA 6 — HD74HC563/HD74HC573 AC Characteristics (CL = 50 pF, Input tr = tf = 6 ns) Ta = –40 to +85°C Ta = 25°C VCC (V) Min Typ Max Min Max Unit Test Conditions Propagation delay t PLH 2.0 — — 110 — 140 ns Data to Q time 4.5 — 11 22 — 28 6.0 — — 19 — 24 t PLH 2.0 — — 115 — 145 ns Clock to Q t PHL 4.5 — 13 23 — 29 6.0 — — 20 — 25 Item Symbol t PHL Output enable t ZH 2.0 — — 150 — 190 time t ZL 4.5 — 14 30 — 38 6.0 — — 26 — 33 Output disable t HZ 2.0 — — 150 — 190 time t LZ 4.5 — 15 30 — 38 6.0 — — 26 — 33 2.0 75 — — 90 — 4.5 15 2 — 19 — 6.0 13 — — 16 — 2.0 5 — — 5 — 4.5 5 –1 — 5 — 6.0 5 — — 5 — 2.0 80 — — 100 — 4.5 16 4 — 20 — 6.0 14 — — 17 — Setup time Hold time Pulse width t su th tw Output rise/fall t TLH 2.0 — — 60 — 75 time t THL 4.5 — 4 12 — 15 6.0 — — 10 — 13 — — 5 10 — 10 Input capacitance Cin ns ns ns ns ns ns pF 7 Unit: mm 24.50 25.40 Max 6.30 11 1 7.00 Max 20 10 1.30 2.54 ± 0.25 0.48 ± 0.10 0.51 Min 1.27 Max 2.54 Min 5.08 Max 0.89 7.62 + 0.11 0.25 – 0.05 0° – 15° Hitachi Code JEDEC EIAJ Weight (reference value) DP-20N — Conforms 1.26 g Unit: mm 12.6 13 Max 11 1 10 1.27 *0.42 ± 0.08 0.40 ± 0.06 0.10 ± 0.10 0.80 Max *0.22 ± 0.05 0.20 ± 0.04 2.20 Max 5.5 20 0.20 7.80 +– 0.30 1.15 0° – 8° 0.70 ± 0.20 0.15 0.12 M *Dimension including the plating thickness Base material dimension Hitachi Code JEDEC EIAJ Weight (reference value) FP-20DA — Conforms 0.31 g Unit: mm 12.8 13.2 Max 11 1 10 0.20 ± 0.10 0.935 Max 1.27 *0.42 ± 0.08 0.40 ± 0.06 *0.27 ± 0.05 0.25 ± 0.04 2.65 Max 7.50 20 0.25 10.40 +– 0.40 1.45 0° – 8° 0.57 0.70 +– 0.30 0.15 0.12 M *Dimension including the plating thickness Base material dimension Hitachi Code JEDEC EIAJ Weight (reference value) FP-20DB Conforms — 0.52 g Unit: mm 6.50 6.80 Max 11 1 10 4.40 20 0.65 *0.22+0.08 –0.07 0.20 ± 0.06 1.0 0.13 M 6.40 ± 0.20 *Dimension including the plating thickness Base material dimension 0.07 +0.03 –0.04 0.10 *0.17 ± 0.05 0.15 ± 0.04 1.10 Max 0.65 Max 0° – 8° 0.50 ± 0.10 Hitachi Code JEDEC EIAJ Weight (reference value) TTP-20DA — — 0.07 g Cautions 1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party’s rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi’s sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor products. Hitachi, Ltd. Semiconductor & Integrated Circuits. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109 URL NorthAmerica : http:semiconductor.hitachi.com/ Europe : http://www.hitachi-eu.com/hel/ecg Asia (Singapore) : http://www.has.hitachi.com.sg/grp3/sicd/index.htm Asia (Taiwan) : http://www.hitachi.com.tw/E/Product/SICD_Frame.htm Asia (HongKong) : http://www.hitachi.com.hk/eng/bo/grp3/index.htm Japan : http://www.hitachi.co.jp/Sicd/indx.htm For further information write to: Hitachi Semiconductor (America) Inc. 179 East Tasman Drive, San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe GmbH Electronic components Group Dornacher Stra§e 3 D-85622 Feldkirchen, Munich Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Hitachi Europe Ltd. Electronic Components Group. Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 778322 Hitachi Asia Pte. Ltd. 16 Collyer Quay #20-00 Hitachi Tower Singapore 049318 Tel: 535-2100 Fax: 535-1533 Hitachi Asia Ltd. Taipei Branch Office 3F, Hung Kuo Building. No.167, Tun-Hwa North Road, Taipei (105) Tel: <886> (2) 2718-3666 Fax: <886> (2) 2718-8180 Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong Tel: <852> (2) 735 9218 Fax: <852> (2) 730 0281 Telex: 40815 HITEC HX Copyright ' Hitachi, Ltd., 1999. All rights reserved. Printed in Japan.