HRC0103A Silicon Schottky Barrier Diode for Rectifying ADE-208-624 (Z) Rev 0 May. 1998 Features • Low forward voltage drop and suitable for high effifiency rectifying. • Ultra small Flat Package (UFP) is suitable for surface mount design. Ordering Information Type No. Laser Mark Package Code HRC0103A S1 UFP Outline Cathode mark Mark 1 S1 2 1. Cathode 2. Anode HRC0103A Absolute Maximum Ratings (Ta = 25°C) Item Symbol *1 RRM Repetitive peak reverse voltage V Average rectified current I o*1 *2 Value Unit 30 V 100 mA 3 A Non-Repetitive peak forward surge current IFSM Junction temperature Tj 125 °C Storage temperature Tstg –55 to +125 °C Note Note 1. See from Fig.3 to Fig.5 2. 10msec sine wave 1 pulse Electrical Characteristics (Ta = 25°C) Item Symbol Min Typ Max Unit Test Condition Forward voltage VF — — 0.44 V I F = 100 mA Reverse current IR — — 50 µA VR = 30V Thermal resistance Rth(j-a) — 500 — °C/W Polyimide board *1 Note 1. Polyimide board 3.0 1.5 0.8 20hx15wx0.8t 1.5 2 Unit: mm HRC0103A Main Characteristic 10 1.0 -2 Pulse test Pulse test -1 10 Ta=75°C 10 -2 10 10 10 Reverse current I R (A) Forward current I F (A) 10 Ta=25°C -3 -4 -4 Ta=75°C 10 -6 -5 Ta=25°C 10 -5 10 10 -3 -6 -7 0 0.2 0.4 0.6 0.8 10 0 1.0 10 20 30 40 50 Reverse voltage V R (V) Forward voltage V F (V) Fig.2 Reverse current Vs. Reverse voltage Fig.1 Forward current Vs. Forward voltage 0.6 0.10 Forward power dissipation Pd (W) 0A 0.08 t T t D= \ T Tj =25°C D=1/6 Sin( ˘=180°) D=1/3 D=1/2 DC 0.06 0.04 0.02 0 Reverse power dissipation Pd (W) 0V t 0.5 T t D= \ T Tj =125°C 0.4 D=5/6 0.3 D=2/3 D=1/2 0.2 Sin( ˘=180°) 0.1 0 0 0.02 0.04 0.06 0.08 0.10 Forward current I F (A) 0.12 Fig.3 Forward power dissipation Vs. Forward current 0 10 20 30 Reverse voltage V R @(V) 40 Fig.4 Reverse power dissipation Vs. Reverse voltage 3 HRC0103A Main Characteristic 0.12 VR=VRRM/2 Tj =125°C Rth(j-a)=500°C/W Average forward current IO (A) 0.10 DC 0.08 D=1/2 Sin( ˘=180°) 0.06 D=1/3 0.04 D=1/6 0.02 0 -25 0 25 50 75 100 125 Ambient temperature Ta (°C) Fig.5 Average forward current Vs. Ambient temperature 4 HRC0103A Package Dimensions Unit : mm Cathode Mark 1 Cathode 2 Anode 0.6 ± 0.10 1.2 ± 0.10 1.6 ± 0.10 0.3 ± 0.05 0.8 ± 0.10 S1 HITACHI Code UFP JEDEC Code — EIAJ Code SC-79 Weight (g) 0.0016 5 Cautions 1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party’s rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi’s sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor products. Hitachi, Ltd. Semiconductor & Integrated Circuits. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109 URL NorthAmerica : http:semiconductor.hitachi.com/ Europe : http://www.hitachi-eu.com/hel/ecg Asia (Singapore) : http://www.has.hitachi.com.sg/grp3/sicd/index.htm Asia (Taiwan) : http://www.hitachi.com.tw/E/Product/SICD_Frame.htm Asia (HongKong) : http://www.hitachi.com.hk/eng/bo/grp3/index.htm Japan : http://www.hitachi.co.jp/Sicd/indx.htm For further information write to: Hitachi Semiconductor (America) Inc. 179 East Tasman Drive, San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe GmbH Electronic components Group Dornacher Stra§e 3 D-85622 Feldkirchen, Munich Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Hitachi Europe Ltd. Electronic Components Group. Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 778322 Hitachi Asia Pte. Ltd. 16 Collyer Quay #20-00 Hitachi Tower Singapore 049318 Tel: 535-2100 Fax: 535-1533 Hitachi Asia Ltd. Taipei Branch Office 3F, Hung Kuo Building. No.167, Tun-Hwa North Road, Taipei (105) Tel: <886> (2) 2718-3666 Fax: <886> (2) 2718-8180 Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong Tel: <852> (2) 735 9218 Fax: <852> (2) 730 0281 Telex: 40815 HITEC HX Copyright ' Hitachi, Ltd., 1999. All rights reserved. Printed in Japan.