DSEC 240-06A HiPerFREDTM Epitaxial Diode IFAV = 2x 120 A VRRM = 600 V trr = 35 ns with soft recovery Non isolated VRSM VRRM V V 600 600 Type DSEC 240-06A Preliminary data Symbol Conditions IFRMS IFAVM TC = 105°C; rectangular, d = 0.5 IFSM TVJ = 45°C; tp = 10 ms (50 Hz), sine EAS TVJ = 25°C; non-repetitive IAS = 3 A; L = 180 µH 0.8 mJ IAR VA = 1.5 • VR typ.; f = 10 kHz; repetitive 0.3 A -40...+150 150 -40...+150 °C °C °C 620 W TVJ TVJM Tstg Ptot TC = 25°C Md mounting torque (M4) terminal connection torque (M4) Weight typical Symbol Conditions Maximum Ratings 200 120 A A 2000 A 1.1-1.5/9-13 1.1-1.5/9-13 Nm/lb.in. Nm/lb.in. 30 g Characteristic Values typ. max. ① VR = VRRM; TVJ = 25°C TVJ = 150°C 2 8 VF ② IF = 120 A; TVJ = 125°C TVJ = 25°C 1.39 1.91 V V 0.2 K/W K/W IR RthJC RthCH with heatsink compound 0.15 trr IF = 1 A; -di/dt = 400 A/µs; VR = 30 V; TVJ = 25°C 35 IRM IF = 400 A; -diF /dt = 200 A/µs VR = 100 V; TVJ = 100°C 6 mA mA ns 7.7 Pulse test: ① Pulse Width = 5 ms, Duty Cycle < 2.0 % ② Pulse Width = 300 µs, Duty Cycle < 2.0 % A Features • International standard package miniBLOC • Epoxy meets UL 94V-0 • 2 independent FRED in 1 package • Planar passivated chips • Very short recovery time • Extremely low switching losses • Low IRM-values • Soft recovery behaviour Applications • Antiparallel diode for high frequency switching devices • Antisaturation diode • Snubber diode • Free wheeling diode in converters and motor control circuits • Rectifiers in switch mode power supplies (SMPS) • Inductive heating • Uninterruptible power supplies (UPS) • Ultrasonic cleaners and welders Advantages • Avalanche voltage rated for reliable operation • Soft reverse recovery for low EMI/RFI • Low IRM reduces: - Power dissipation within the diode - Turn-on loss in the commutating switch Dimensions see Outlines.pdf IXYS reserves the right to change limits, test conditions and dimensions. 1-1 329 Data according to IEC 60747 and per diode unless otherwise specified © 2003 IXYS All rights reserved