DSEP 15-06B HiPerFREDTM Epitaxial Diode IFAV = 15 A VRRM = 600 V = 25 ns trr with soft recovery Preliminary data VRSM VRRM V V 600 600 Type A C TO-220 AC C DSEP 15-06B A C (TAB) D4 A = Anode, C = Cathode, TAB = Cathode Symbol Conditions Maximum Ratings IFRMS IFAVM TC = 130°C; rectangular, d = 0.5 35 15 A A Features IFSM TVJ = 45°C; tp = 10 ms (50 Hz), sine 110 A EAS TVJ = 25°C; non-repetitive; IAS = 1 A; L = 100 µH L = 20 mH 0.1 20 mJ mJ VA = 1.5·VR typ.; f = 10 kHz; repetitive 0.1 A -55...+175 175 -55...+150 °C °C °C 95 W 0.4...0.6 Nm ● IAR ● ● ● ● ● TVJ TVJM Tstg Ptot TC = 25°C Md mounting torque Weight typical 2 ● Applications ● g ● ● ● Symbol IR ① VF ② Conditions Characteristic Values typ. max. TVJ = 25°C VR = VRRM TVJ = 150°C VR = VRRM 100 0.5 µA mA IF = 15 A; 1.55 2.52 V V 1.6 K/W K/W 30 ns 2.6 A TVJ = 150°C TVJ = 25°C RthJC RthCH 0.5 t rr IF = 1 A; -di/dt = 100 A/µs; VR = 30 V; TVJ = 25°C IRM VR = 100 V; IF = 25 A; -diF/dt = 100 A/µs TVJ = 100°C 25 Pulse test: ① Pulse Width = 5 ms, Duty Cycle < 2.0 % ② Pulse Width = 300 µs, Duty Cycle < 2.0 % International standard package Planar passivated chips Very short recovery time Extremely low switching losses Low IRM-values Soft recovery behaviour Epoxy meets UL 94V-0 ● ● ● ● Antiparallel diode for high frequency switching devices Antisaturation diode Snubber diode Free wheeling diode in converters and motor control circuits Rectifiers in switch mode power supplies (SMPS) Inductive heating Uninterruptible power supplies (UPS) Ultrasonic cleaners and welders Advantages ● ● ● Avalanche voltage rated for reliable operation Soft reverse recovery for low EMI/RFI Low IRM reduces: - Power dissipation within the diode - Turn-on loss in the commutating switch Dimensions see pages D4 - 85-86 IXYS reserves the right to change limits, test conditions and dimensions. © 2001 IXYS All rights reserved 147 Data according to IEC 60747 and per diode unless otherwise specified 1-1