DSEC 30-02A HiPerFREDTM Epitaxial Diode IFAV = 2x 15 A VRRM = 200 V trr = 30 ns with common cathode and soft recovery Preliminary Data VRSM VRRM V V 200 200 TO-247 AD Type DSEC 30-02A A C A C A A C (TAB) A = Anode, C = Cathode, TAB = Cathode Symbol Test Conditions IFRMS IFAVM TC = 150°C; rectangular, d = 0.5 IFSM EAS Maximum Ratings 50 15 A A TVJ = 45°C; tp = 10 ms (50 Hz), sine 140 A TVJ = 25°C; non-repetitive IAS = 2.5 A; L = 180 µH 0.8 mJ VA = 1.5·VR typ.; f = 10 kHz; repetitive 0.3 A -55...+175 175 -55...+150 °C °C °C 95 W Features ● ● ● IAR TVJ TVJM Tstg Ptot TC = 25°C Md mounting torque Weight typical 0.45...0.55 4...5 6 Nm lb.in. g ● ● ● ● Applications ● ● ● Symbol IR ① VF ② Test Conditions Characteristic Values typ. max. TVJ = 25°C VR = VRRM TVJ = 150°C VR = VRRM 100 0.5 µA mA IF = 15 A; 0.85 1.05 V V 1.6 K/W K/W TVJ = 150°C TVJ = 25°C RthJC RthCH 0.25 trr IF = 1 A; -di/dt = 100 A/µs; VR = 30 V; TVJ = 25°C 25 IRM VR = 100 V; IF = 25 A; -diF/dt = 100 A/µs TVJ = 100°C 3.5 ns 4.4 A ● ● ● ● ● Antiparallel diode for high frequency switching devices Antisaturation diode Snubber diode Free wheeling diode in converters and motor control circuits Rectifiers in switch mode power supplies (SMPS) Inductive heating Uninterruptible power supplies (UPS) Ultrasonic cleaners and welders Advantages ● ● ● Pulse test: ① Pulse Width = 5 ms, Duty Cycle < 2.0 % ② Pulse Width = 300 ms, Duty Cycle < 2.0 % International standard package Planar passivated chips Very short recovery time Extremely low switching losses Low IRM-values Soft recovery behaviour Epoxy meets UL 94V-0 Avalanche voltage rated for reliable operation Soft reverse recovery for low EMI/RFI Low IRM reduces: - Power dissipation within the diode - Turn-on loss in the commutating switch Dimensions see outlines.pdf IXYS reserves the right to change limits, test conditions and dimensions. © 2000 IXYS All rights reserved 945 Data according to IEC 60747 and per diode unless otherwise specified 1-1