SUBMINIATURE SOLID STATE LAMP AM2520MGC03 MEGA GREEN Features Description !SUBMINIATURE PACKAGE. The Mega Green source color devices are made with !WIDE VIEWING ANGLE. DH InGaAlP on GaAs substrate Light Emitting Diode. !GULL WING. !LONG LIFE - SOLID STATE RELIABILITY. !LOW PACKAGE PROFILE. !PACKAGE : 1000PCS / REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. SPEC NO:CDA0454 APPROVED:J.LU REV NO: V.1 CHECKED: DATE: OCT/27/2001 DRAWN:M.F.CAI PAGE: 1 OF 4 Selection Guide Par t No . Dic e AM2520MGC03 Iv (mc d ) @ 20 mA L en s Ty p e MEGA GREEN (InGaAlP) WATER CLEAR Viewin g An g le Mi n . Ty p . 2θ1/2 100 400 20° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°°C Sy m b o l P ar am et er D ev i c e λpeak Peak Wavelength Mega Green λD Dominate Wavelength ∆λ 1/2 Ty p . Max . Un its Tes t Co n d it io n s 574 nm IF=20mA Mega Green 568 nm IF=20mA Spectral Line Halfwidth Mega Green 26 nm IF=20mA C Capacitance Mega Green 20 pF VF=0V;f=1MHz VF Forward Voltage Mega Green 2.1 2.5 V IF=20mA IR Reverse Current Mega Green 10 uA V R = 5V Absolute Maximum Ratings at TA=25°°C P ar am et er Meg a Gr een Un its Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 205 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: CDA0454 APPROVED:J.LU REV NO: V.1 CHECKED: DATE: OCT/27/2001 DRAWN:M.F.CAI PAGE: 2 OF 4 Mega Green AM2520MGC03 SPEC NO:CDA0454 APPROVED:J.LU REV NO: V.1 CHECKED: DATE: OCT/27/2001 DRAWN:M.F.CAI PAGE: 3 OF 4 AM2520MGC03 SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: CDA0454 APPROVED:J.LU REV NO: V.1 CHECKED: DATE: OCT/27/2001 DRAWN:M.F.CAI PAGE: 4 OF 4