3.0mmx2.5mm SURFACE MOUNT LED LAMP APB3025EYC Features Description ! 3.0mmx2.5mm ! BI SMT LED, 1.1mm THICKNESS. -COLOR,LOW POWER CONSUMPTION. ! WIDE ! IDEAL HIGH EFFICIENCY RED / YELLOW The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange VIEWING ANGLE. Light Emitting Diode. FOR BACKLIGHT AND INDICATOR. The Yellow source color devices are made with Gallium ! VARIOUS COLORS AND LENS TYPES AVAILABLE. ! PACKAGE : 2000PCS / REEL. Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.0079") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAD1096 APPROVED: J.Lu REV NO: V.1 CHECKED: Allen Liu DATE: MAR/19/2003 DRAWN: K.ZHANG PAGE: 1 OF 4 Selection Guide Dic e P ar t N o . L en s Ty p e HIGH EFFICIENCY RED (GaAsP/GaP) APB3025EYC Iv (m c d ) @ 20 m A YELLOW (GaAsP/GaP) WATER CLEAR V i ew i n g An g l e Min . Ty p . 4 12 2.6 8 2θ1/2 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°°C Sy m b o l Par am et er D ev i c e λpeak Peak Wavelength High Efficiency Red Yellow λD Dominate Wavelength ∆λ1/2 Ty p . Max . Un it s Tes t Co n d it io n s 627 590 nm I F =20mA High Efficiency Red Yellow 625 588 nm I F =20mA Spectral Line Halfwidth High Efficiency Red Yellow 45 35 nm I F =20mA C Capacitance High Efficiency Red Yellow 15 20 pF VF=0V;f=1MHz VF Forward Voltage High Efficiency Red Yellow 2.0 2.1 2.5 2.5 V I F =20mA IR Reverse Current All 10 uA V R = 5V Absolute Maximum Ratings at T)=25°°C Par am et er H i g h E f f i c i en c y R ed Yello w Un it s Power dissipation 105 10 5 mW DC Forward Current 30 30 mA Peak Forward Current [1] 160 14 0 mA 5 5 V Reverse Voltage -40°C To +85°C Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD1096 APPROVED: J.Lu REV NO: V.1 CHECKED: Allen Liu DATE: MAR/19/2003 DRAWN: K.ZHANG PAGE: 2 OF 4 High Efficiency Red / Yellow SPEC NO: DSAD1096 APPROVED: J.Lu APB3025EYC REV NO: V.1 CHECKED: Allen Liu DATE: MAR/19/2003 DRAWN: K.ZHANG PAGE: 3 OF 4 APB3025EYC SMT Reflow Soldering Instruction Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAD1096 APPROVED: J.Lu REV NO: V.1 CHECKED: Allen Liu DATE: MAR/19/2003 DRAWN: K.ZHANG PAGE: 4 OF 4