SURFACE MOUNT DISPLAY APPDA04-41SGWA SUPER BRIGHT GREEN Features Description !0.4 INCH CHARACTER HEIGHT. The Super Bright Green source color devices are !LOW made with Gallium Phosphide Green Light Emitting CURRENT OPERATION. !HIGH CONTRAST AND LIGHT OUTPUT. Diode. ! EASY MOUNTING ON P.C. BOARDS OR SOCKETS. !CATEGORIZED FOR LUMINOUS INTENSITY. !MECHANICALLY RUGGED. !GRAY FACE, WHITE SEGMENT. ! PACKAGE :500PCS / REEL. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO:DSAB3117 APPROVED : J. Lu REV NO: V.2 CHECKED : Joe Lee DATE:APR/11/2003 DRAWN: S.J.HOU PAGE: 1 OF 5 Selection Guide Par t No . Dic e Iv (u c d ) @ 10 m A L en s Ty p e APPDA04-41SGWA SUPER BRIGHT GREEN (GaP) WHITE DIFFUSED D es c r i p t i o n Min . Ty p . 1900 750 0 Common Anode. Rt.Hand Decimal Electrical / Optical Characteristics at T)=25°°C Sy m b o l Par am et er λpeak Peak Wavelength Super Bright Green λD Dominate Wavelength ∆λ1/2 D ev i c e Ty p . Un it s Tes t Co n d it io n s 565 nm I F =20mA Super Bright Green 568 nm I F =20mA Spectral Line Half-width Super Bright Green 30 nm I F =20mA pF VF=0V;f=1MHz 2.5 V I F =20mA 10 uA V R = 5V C Capacitance Super Bright Green 15 VF Forward Voltage Super Bright Green 2.2 IR Reverse Current Super Bright Green Max . Absolute Maximum Ratings at T)=25°°C P ar am e t e r Su p er B r ig h t Gr een Un it s Power dissipation 105 mW DC Forward Current 25 mA Peak Forward Current [1] 140 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO:DSAB3117 APPROVED : J. Lu REV NO: V.2 CHECKED : Joe Lee DATE:APR/11/2003 DRAWN: S.J.HOU PAGE: 2 OF 5 Super Bright Green APPDA04-41SGWA SPEC NO:DSAB3117 APPROVED : J. Lu REV NO: V.2 CHECKED : Joe Lee DATE:APR/11/2003 DRAWN: S.J.HOU PAGE: 3 OF 5 APPDA04-41SGWA SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) SPEC NO:DSAB3117 APPROVED : J. Lu REV NO: V.2 CHECKED : Joe Lee DATE:APR/11/2003 DRAWN: S.J.HOU PAGE: 4 OF 5 Tape Specifications (Units : mm) SPEC NO:DSAB3117 APPROVED : J. Lu REV NO: V.2 CHECKED : Joe Lee DATE:APR/11/2003 DRAWN: S.J.HOU PAGE: 5 OF 5