NTE6248 Silicon Schottky Barrier Rectifier Features: D Guarding for Stress Protection D Low Forward Voltage D High Current Capability D High Surge Capability Maximum Ratings and Electrical Characteristics: (TA = +25°C unless otherwise specified. Resistive or inductive load.) Maximum Recurrent Peak Reverse Voltage, VRRM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600V Maximum RMS Voltage, VRMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420V Maximum DC Blocking Voltage, VDC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600V Maximum Average Rectified Forward Current (TC = +100°C), IF(AV) . . . . . . . . . . . . . . . . . . . . . . . 16A Peak Forward Surge Current, IFSM (8.3ms single half sine–wave superimposed on rated load) . . . . . . . . . . . . . . . . . . . . . . . 250A Maximum Instantaneous Forward Voltage (IF = 16A), VF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5V Maximum DC Reverse Current (rated DC Blocking Voltage), IR TC = +25°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10µA TC = +100°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500µA Maximum Reverse Recovery Time (TJ = +25°C, Note 1), TRR . . . . . . . . . . . . . . . . . . . . . . . . . . . 50ns Typical Junction Capacitance (Note 2), CJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145pF Typical Thermal Resistance, Junction–to–Case, RthJC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5°C/W Operating Junction Temperature Range, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –55° to +175°C Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –55° to +175°C Note 1. Reverse Recovery Test Conditions: IF = 500mA, IR = 1A, recover to 250mA. Note 2. Measured at 1MHz and applied reverse voltage of 4V. .195 (4.92) Max .419 (10.62) Max Tab Common to K .054 (1.38) .269 (6.83) Max .624 (15.83) Max .139 (3.53) Dia Min + K A .500 (12.7) Max .038 (0.98) Min .200 (5.08) .025 (0.65) Max