S11MD5V Mini-flat Type Phototriac Coupler S11MD5V ❈ Lead forming type (I type) and taping reel type (P type) are also available. (S11MD5VI/S11MD5VP) ❈ TUV ( VDE0884 ) approved type is also available as an option. .. ■ Features ■ Outline Dimensions 1. Isolation voltage between input and output Viso : 5 000Vrms 2. High critical rate of rise of OFF-state voltage ( dV /dt : MIN. 100V/ µ s ) 3. Recognized by UL, file No. E64380 ( S11MD5V/S11MD5VI ) ❈ S11MD5V is for 100V line 2.54± 0.25 6 5 4 2 Anode Cathode NC Anode, Cathode 5 No external connection 6 Anode, Cathode 1 2 3 1.2± 0.3 7.62± 0.3 7.12 ± 0.5 3.5± 0.5 3.7± 0.5 0.5TYP. 3.35± 0.5 ■ Absolute Maximum Ratings Output 4 1 2 3 4 3 1. For triggering medium/high power triac Input 5 0.9± 0.2 Anode mark ■ Applications 6 6.5± 0.5 S11MD5V 1 ( Unit : mm ) Internal connection diagram 0.5± 0.1 0.26± 0.1 θ : 0 to 13 ˚ θ ( Ta = 25˚C) Parameter Forward current Reverse voltage RMS ON-state current ∗1 Peak one cycle surge current Repetitive peak OFF-state voltage ∗2 Isolation voltage Operating temperature Storage temperature ∗3 Soldering temperature Symbol IF VR IT Isurge VDRM Viso Topr Tstg Tsol Rating 50 6 100 1.2 400 5 000 - 30 to + 100 - 55 to + 125 260 Unit mA V mA rms A V V rms ˚C ˚C ˚C ∗1 Sine wave ∗2 40 to 60% RH, AC for 1 minute ∗3 For 10 seconds ■ Electro-optical Characteristics Input Output Transfer characteristics Parameter Forward voltage Reverse current Repetitive peak OFF-state current ON-state voltage Holding current Critical rate of rise of OFF-state voltage Minimum trigger current Isolation resistance Turn-on time ( Ta = 25˚C) Symbol VF IR IDRM VT IH dV/dt IFT RISO ton Conditions I F = 20mA VR = 3V VDRM = Rated I T = 100mA VD = 6V VDRM = 1/ 2 Rated VD = 6V, R L = 100Ω DC500V, 40 to 60% RH VD = 6V, I F = 20mA, RL = 100Ω MIN. 0.1 100 5 x 1010 - TYP. 1.2 1.3 1 1011 80 MAX. 1.4 10- 5 10- 6 2.0 3.5 10 200 “ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any of SHARP's devices, shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest version of the device specification sheets before using any SHARP's device.” Unit V A A V mA V/ µ s mA Ω µs S11MD5V Fig. 1 RMS ON-state Current vs. Ambient Temperature Fig. 2 Forward Current vs. Ambient Temperature 70 60 Forward current IF (mA) RMS ON-state current I T (A rms) 0.10 0.05 0 20 40 60 80 Ambient temperature T a (˚C) 30 20 0 -30 100 Fig. 3 Forward Current vs. Forward Voltage 100 12 Minimum trigger current I FT (mA) 14 T a = 100˚C 75˚C 50˚C 25˚C 0˚C -30˚C 20 10 5 2 1 0 0.5 1.0 1.5 2.0 Forward voltage VF (V) 2.5 4 2 ON-state voltage VT (V ) 1.5 100 I T = 100mA 1.4 1.3 1.2 1.1 0.8 0.7 -30 0 20 40 60 80 Ambient temperature T a (˚C) Fig. 6 ON-state Voltage vs. Ambient Temperature 1.2 0.9 VD = 6V RL = 100Ω 6 1.6 1.0 125 8 1.3 1.1 25 75 100 50 Ambient temperature T a (˚C) 10 0 -30 3.0 Fig. 5 Relative Repetitive Peak OFF-state Voltage vs. Ambient Temperature 0 Fig. 4 Minimum Trigger Current vs. Ambient Temperature 200 50 Forward current IF (mA) 40 10 0 -30 Relative repetitive peak OFF-state voltage V DRM ( Tj = T a ) /V DRM ( Tj= 25˚C) 50 0 20 40 60 80 Ambient temperature T a (˚C) 100 1.0 -30 0 20 40 60 80 Ambient temperature T a (˚C) 100 S11MD5V Fig. 7 Holding Current vs. Ambient Temperature Fig. 8 Repetitive Peak OFF-state Current vs. OFF-state Voltage 2 10 Repetitive peak OFF-state current I DRM ( A ) V D = 6V Holding current I H (mA) 5 2 1 0.5 0.2 0.1 - 30 0 20 40 60 80 Ambient temperature T a (˚C) 5 2 10 - 10 5 100 200 300 400 500 OFF-state voltage VD ( V ) 600 Fig.10 Turn-on Time vs. Forward Current 200 V DRM = Rated V D = 6V RL = 100Ω T a = 25˚C 2 10 - 8 Turn-on time t on ( µ s ) Repetitive peak OFF-state current I DRM ( A ) 5 10 - 9 100 Fig. 9 Repetitive Peak OFF-state Current vs. Ambient temperature 10 - 7 T a = 25˚C 5 2 10 - 9 5 2 10 - 10 100 50 5 2 10 - 11 20 10 5 -30 0 20 40 60 80 Ambient temperature T a ( ˚C ) 100 100 ON-state current IT ( mA ) F 50 ( mA ) 100 ■ Basic Operation Circuit Fig.11 ON-state Current vs. ON-state Voltage Medium/High Power Triac Drive Circuit I F = 20mA T a = 25˚C 90 20 Forward current I 80 +VCC 70 60 1 6 2 5 Load AC100V VIN 50 40 3 4 30 20 Note) Please use on condition of the triac for power triggers. 10 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 ON-state voltage V T ( V ) ● Please refer to the chapter “ Precautions for Use.” ( Page 78 to 93 ) .