DC/DC Converter TYL/TVL Series 1.5-5 Watt Features Ultra low Ripple and Noise Full SMD-Design with Ceramic Capacitores Tightly regulated Outputs High Output Stability Short Circuit Protection Shielded Metal Case Single- and Dual Output Models 2 Year Product Warranty The TYL and TVL Series are DC/DC-Converter with very low output ripple and noise specification. These DC/DC-Converter are an ideal solution for noise sensitive applications as analoge circuits, audio applications, reference voltages or mesuring systems. SMDtechnology and a 100 % production test ensure a very high reliability of these products. Models Ordercode TYL 05-05S30 TYL 05-12S12 TYL 05-15S10 TYL 05-05W08 TYL 05-12W06 TYL 05-15W05 TVL 05-1220 TVL 05-1225 TVL 05-1516 TVL 05-1520 www.tracopower.com Input voltage range Output 1 Output 2 Ripple and noise max. 4.75 – 6 VDC 5 12 15 +5 +12 +15 VDC / VDC / VDC / VDC / VDC / VDC / 300 120 100 80 65 53 mA mA mA mA mA mA – 5 VDC / 80 mA –12 VDC / 65 mA –15 VDC / 53 mA 6 mVpk-pk 6 mVpk-pk 6 mVpk-pk 6 mVpk-pk 6 mVpk-pk 6 mVpk-pk 4.75 – 6 VDC +12 +12 +15 +15 VDC / VDC / VDC / VDC / 200 250 165 200 mA mA mA mA –12 –12 –15 –15 3 3 3 3 VDC / VDC / VDC / VDC / 200 125 165 100 mA mA mA mA mVpk-pk mVpk-pk mVpk-pk mVpk-pk Page 1 DC/DC Converter TYL/TVL Series 1.5-5 Watt Input Specifications Input current (no load) TYL models TVL models Input current (full load) TYL models TVL models < 95 mA < 170 mA 500 mA typ. 1’600 mA typ. Otput Specifications Voltage set accuracy Regulation ±3% – Input variation Vin min. to Vin max. TYL TVL – Load variation 0 – 100 % TYL TVL Ripple and noise (20 MHz Bandwidth) models: models: models: models: TYL models: TVL models: ± 0.3 % max. ± 0.03 % max. ± 0.3 % max. ± 0.18 % max. 6 mVpk-pk max. 3 mVpk-pk max. Temperature coefficient ± 0.02 % / °C Output current limitation >120 % of Iout max. Short circuit protection indefinite (automatic rcovery) General Specifications Temperature ranges – 25°C ... +71°C – 45°C ... +85°C – Operating – Storage Derating 3%/°C above 50°C Efficiency 60% (TVL 05-05W08: 45%) Humidity (non condensing) 30 – 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217 F) >1’000’000h @ + 25 °C Isolation voltage Input/Output 500 VDC Isolation capacity Input/Output 100 pF Isolation resistance Input/Output (500 VDC) > 10 M Ohm Switching frequency TYL models: TVL models: 70 – 400 kHz depending on load 50 – 300 kHz depending on load Vibration 5 to 10 Hz amplitude 10 mm pk-pk 10 to 55 Hz acceleration 2 G Shock acceleration 20 G max. time 11 ms All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. www.tracopower.com Page 2 DC/DC Converter TYL/TVL Series 1.5-5 Watt Physical Specifications Case material Steel chrome-nickel plated Potting material Silicon rubber TSE (flammability to UL94V-0) Weight TYL models: TVL models: 14 g (0.49 oz) 31 g (1.09 oz) Soldering temperature max. 260 °C / 10 sec. Application Ripple an noise reduction to <2mVpk-pk Use external capacitores to reduce ripple an noise Single output models: +Vin TYL C1: 47 µF/10V 10 µF/10V C2: 1 µF/16V 1 µF/16V C3: 470 nF 470 nF +Vout +Vin = C1 TYL / TVL low ESR type C2 C3 Tantalum Ceramic C2 C4 Tantalum Ceramic C3 C5 Tantalum Ceramic Load TVL –Vin –Vin –Vout +Vin +Vout TYL C1: 47 µF/10V 10 µF/10V C2+C3: 2.2 µF/16V 1 µF/16V C4+C5: 470 nF 470 nF +Vin = TYL / TVL C1 Common low ESR type –Vin –Vin Load2 TVL Load1 Dual output models: –Vout All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. www.tracopower.com Page 3 DC/DC Converter TYL/TVL Series 1.5-5 Watt (0.9) 2.33 Outline Dimensions mm (inches) TYL (0.9) 22.86 1 Bottom view 15 10 13 12 (0.2) 5.08 (1.1) 27.94 (1.28) 32.6 24 5 10.3 (0.2) (0.4) 2.58 15.24 (0.1) (0.6) TYL Pin-Out 20.4 (0.8) Pin Single Dual 1 –Vin (GND) –Vin (GND) 10 –Vout –Vout 12 –Vout Common 13 +Vout Common 15 +Vout +Vout 24 +Vin (Vcc) +Vin (Vcc) (0.61) TVL Pin-Out 2 1 (0.8) 20.32 (2.02) 51.3 max TVL 15.5 5.08 (0.02) Bottom view 5 1.8 4 3 (0.07) 15.5 10.16 10.16 (0.61) Pin Dual output 1 +Vin (Vcc) 2 –Vin (GND) 3 +Vout 4 Common 5 –Vout (0.4) (0.4) 20.32 (0.8) 6 8 (0.24) (0.31) Pin diameter ø 0.6 ±0.05 51.3 max (2.02) (0.023 ±0.002) Tolerances ±0.5 (0.02) Specifications can be changed without notice Rev. 12/00 Jenatschstrasse 1 • CH-8002 Zurich • Switzerland Tel. +41-1284 2911 • Fax +41-1201 1168 • e-mail: [email protected] • internet: http://www.tracopower.com Page 4