P-511-280(V:2) PD035VX3 Version : 2.0 TECHNICAL MODEL SPECIFICATION NO : PD035VX3 The content of this information is subject to be changed without notice. Please contact PVI or its agent for further information. Customer’s Confirmation Customer Date By PVI’s Confirmation Confirmed By Prepared By The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:1 P-511-280(V:2) PD035VX3 TECHNICAL SPECIFICATION CONTENTS NO. ITEM PAGE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Cover Contents Application Features Mechanical Specifications Mechanical Drawing of TFT-LCD module Input / Output Terminals Absolute Maximum Ratings Electrical Characteristics Pixel Arrangement Display Color and Gray Scale Reference Block Diagram Interface Timing Power On Sequence Optical Characteristics 1 2 3 3 3 4 5 8 8 10 11 12 13 18 18 22 23 24 26 27 - Handling Cautions Reliability Test Packing Revision History Appendix The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:2 P-511-280(V:2) PD035VX3 1. Application This data sheet applies to a color TFT LCD module, PD035VX3. The application of panel are projector and other media application which require high quality flat panel display. 2. Features . Amorphous silicon TFT LCD panel with LED B/L. . Module with resistive type touch panel . . Pixel in stripe configuration . Display Colors：262,144 colors . TTL transmission interface 3.Mechanical Specifications Parameter Screen Size Display Format Display Colors Active Area Pixel Pitch Pixel Configuration Outline Dimension Weight Surface treatment Display Mode Surface treatment of Touch Panel Backlight Gray scale inversion direction Specifications 3.5 (diagonal) 640×(R, G, B)×480 262,144 72.0 (H)×52.56 (V) 0.1125 (H)×0.1095 (V) Stripe 84.03 (W)×65.24 (H)×4.55 (D) (Typ.) 52±5 AG Normally white 3H 6-LED 6 o’clock [ ref to Page 18 viewing angle ] Unit inch dot mm mm mm g The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:3 P-511-280(V:2) PD035VX3 裸銅鍍金 4 1 4.Mechanical Drawing of TFT-LCD Module YU XR 1 4 XL YD The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:4 P-511-280(V:2) PD035VX3 5.Input / Output Terminals TFT-LCD Panel Driving Pin No. Symbol 1 DIO1 2 VSS2 3 VDD1 4 CLK 5 R/L 6 R0 7 R1 8 R2 9 R3 10 R4 11 R5 12 VSS2 13 G0 14 G1 15 G2 16 G3 17 G4 18 G5 19 B0 20 B1 21 B2 22 B3 23 B4 24 B5 25 LD 26 REV 27 POL 28 DIO2 29 VSS2 30 V3 31 V5 32 V7 33 V8 34 V10 35 V12 36 VSS2 37 VDD2 38 VCOM 39 OE 40 U/D 41 CKV 42 STVU 43 STVD 44 VGG 45 VSS1 46 VCC 47 VEE 48 VLED 49 GLED2 50 GLED1 I/O I/O I I I I I I I I I I I I I I I I I I I I I I I I I I I/O I I I I I I I I I I I I I I/O I/O I I I I - Function Horizontal Start Pulse Signal Input or Output 1 Ground Power Supply Horizontal Shift Clock Left/Right Selection Red Data (LSB) Red Data Red Data Red Data Red Data Red Data (MSB) Ground Green Data (LSB) Green Data Green Data Green Data Green Data Green Data (MSB) Blue Data (LSB) Blue Data Blue Data Blue Data Blue Data Blue Data (MSB) Load output signal Data invert control Polarity selection Horizontal Start Pulse Signal Input or Output Ground Gamma Voltage 3 Gamma Voltage 5 Gamma Voltage 7 Gamma Voltage 8 Gamma Voltage 10 Gamma Voltage 12 Ground Voltage for analog circuit Common Voltage Output Enable Up/Down Selection Vertical Shift Clock Vertical Shift Pulse Signal Input or Output Vertical Shift Pulse Signal Input or Output Gate On Voltage Ground Voltage for logic circuit Gate Off Voltage Supply voltage for LED backlight Ground for LED backlight Ground for LED backlight Remark Note5-3 Note 5-3 Note5-7 Note5-8 Note5-9 Note5-3 Note5-10 Note5-10 Note5-10 Note5-10 Note5-10 Note5-10 Note5-10 Note5-5 Note5-6 Note5-4 Note5-6 Note5-6 Note5-1 Note5-2 Note5-11 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:5 P-511-280(V:2) PD035VX3 Note 5-1 Gate on voltage, VGG= +17V. Note 5-2: Gate off voltage, VEE= -10V. Note 5-3: Select left or right shift R/L 1 0 DIO1 Input Hi-Z DIO2 Hi-Z Input Shift Left to right Right to left Note 5-4: Gate driver shift clock Note 5-5: When OE is connected to high “1”, the driver outputs are disabled (Gate output = VEE). Under this condition, the operation of registers will not be affected. Note 5-6: Select up or down shift U/D 1 0 STVU Hi-Z Input STVD Input Hi-Z Shift Down to Up Up to Down Note 5-7Latch the polarity of outputs and switch the new data to outputs At the rising edge (LD), latch the “POL” signal to control the polarity of the outputs. Note 5-8 Control whether the Data R0~G5 are inverted or not. (PVI suggests connecting to GND) When “REV=1”, these data will be inverted. EX: “00”→”3F”, “07”→”38”, “15”→”2A” Note 5-9: Polarity selector for dot-inversion control. Available at the rising edge of LD. When POL=1: Even outputs range from V1~V7, and Odd outputs range from V8~V14; When POL=0: Even outputs range from V8~V14, and Odd outputs range from V1~V7. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:6 P-511-280(V:2) PD035VX3 Note 5-10 Typical Application Circuit C1 0 . 1 uF 1 VDD2 R1 2 C2 0. 1 uF . 1.2K 1 R2 2 V5 V3 OPEN C4 0.1uF 1 R3 2 V7 OPEN 1 V8 R4 2 C3 0. 1 uF 1K OHM C5 0.1uF 1 R5 2 V 10 OPEN 1 R6 2 V 12 C6 0. 1 uF OPEN C7 0. 1 uF 1 R7 2 1.2K OHM GND Note 5-11: ILED TYP.=20mA. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:7 P-511-280(V:2) PD035VX3 6.Touch Panel Characteristics 6.1) Pin assignment: Pin Symbol Function Remark 1 XL Upper electrode X ( Left side) 2 YU Lower electrode (Upper side) 3 XR Upper electrode X ( Right side) 4 YD Lower electrode (Down side) 6.2) Electrical Performance: Parameters Terminal Resistance Input Voltage Linearity(X ,Y direction) Insulation Impedance Response Time Operation Force Symbol X Y VT - MIN. 100 100 20 - Typ. 5.0 - MAX. 900 900 7.0 ±1.5 5 35 Unit Ω Ω V % MΩ ms g Remark DC 25V Note 6-1 Note 6-1 Input through 0.8R stylus or finger. 6.3) Durability Performance 1. Hitting Durability: At least 1,000,000 times with R8.0mm silicon rubber, 200g , 3times/sec . 2. Sliding Durability: At least 100,000 times with R0.8mm polyacetal stylus , 200g , 60mm/sec. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:8 P-511-280(V:2) PD035VX3 7.Absolute Maximum Ratings: Vss1=Vss2=GND=0V, Ta=25℃ Parameters Symbol VDD1 VCC VDD2 VGG VGG－VEE VEE Supply Voltage MIN. -0.5 -0.3 -0.5 -0.3 -20 MAX. 5.0 5.0 12.0 40.0 40.0 0.3 Unit V V V V V V Remark 8.Electrical Characteristics 8-1) Recommended Operating Conditions: Item Symbol Supply Voltage for Source Driver VDD1 VDD2 Supply Voltage for Gate Driver VGG VEE VCC Vss1=Vss2=GND = 0V，Ta = 25℃ Typ. Max. Unit Remark 3.3 3.6 V 10 10.5 17 V -10 V 3.3 3.6 V Min. 3.0 9.5 3.0 Supply Voltage for Vcom Vcom - 2.7 - V Digital Input Voltage VIH VIL 0.8VDD1 0 - VDD1 0.2VDD1 V V 7-2) Recommended driving condition for LED backlight GND = 0 V， Ta = 25℃ Parameter Supply voltage of LED backlight Supply current of LED backlight Backlight Power Consumption Symbol Min TYP VLED 9 9.6 11.4 V Remark IL = 20 mA - 20 - mA Note 7-1 360 384 456 mW Note 7-2 ILED1 ILED2 PLED MAX Unit Note 7-1 : LED B/L applied information , please refer to the appendix at the end . Note 7-2 : PLED = VLED * ILED1 + VLED * ILED2 . V L ED V L ED G LED1 G LED2 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:9 P-511-280(V:2) PD035VX3 7-3) Power Consumption Parameter Supply Current for Gate Driver (Hi level) Supply Current for Gate Driver (Low level) Supply Current for Source Driver (Digital) Supply Current for Source Driver (Analog) Supply Current for Gate Driver (Digital) LCD Panel Power Consumption Backlight Power Consumption Symbol Condition IGG VGG=+17V IEE VEE=-10V IDD1 VDD1=+3.3V IDD2 VDD2=+10V ICC VCC=+3.3V - Typ. Max. Unit 0.12 0.15 4.8 16.0 0.17 180 0.15 0.19 8.0 30.0 0.21 332 PLED - 384 456 mA mA mA mA mA mW mW - - 564 788 mW Total Power Consumption Remark 8. Pixel Arrangement The LCD module pixel arrangement is the stripe. R G B R G B R G B 1st Line R G B R G B 2nd Line RG B R G B 3rd Line RGB 1st Pixel RGB 640th Pixel 1 Pixel = R G B R G B 478th Line RG B R G B R G B 479 th Line RGB R G B RG BRG B 480th Line RGB The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:10 P-511-280(V:2) PD035VX3 9. Display Color and Gray Scale Reference Color Red Input Color Data Green Blue R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0 Basic Colors Red Green Blue Black 0 0 0 0 0 0 Red (63) 1 1 1 1 1 1 Green (63) 0 0 0 0 0 0 Blue (63) 0 0 0 0 0 0 Cyan 0 0 0 0 0 0 Magenta 1 1 1 1 1 1 Yellow 1 1 1 1 1 1 White 1 1 1 1 1 1 Red (00) 0 0 0 0 0 0 Red (01) 0 0 0 0 0 1 Red (02) 0 0 0 0 1 0 Darker ↓ ↓ ↓ ↓ ↓ ↓ ↓ Brighter Red (61) 1 1 1 1 0 1 Red (62) 1 1 1 1 1 0 Red (63) 1 1 1 1 1 1 Green (00) 0 0 0 0 0 0 Green (01) 0 0 0 0 0 0 Green (02) 0 0 0 0 0 0 Darker ↓ ↓ ↓ ↓ ↓ ↓ ↓ Brighter Green (61) 0 0 0 0 0 0 Green (62) 0 0 0 0 0 0 Green (63) 0 0 0 0 0 0 Blue (00) 0 0 0 0 0 0 Blue (01) 0 0 0 0 0 0 Blue (02) 0 0 0 0 0 0 Darker ↓ ↓ ↓ ↓ ↓ ↓ ↓ Brighter Blue (61) 0 0 0 0 0 0 Blue (62) 0 0 0 0 0 0 Blue (63) 0 0 0 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 0 1 1 1 0 1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:11 P-511-280(V:2) PD035VX3 10. Block Diagram 10-1) TFT-module Block Diagram SYSTEM Timing Controller (PVI-2003A) User signal input Video Control VDD1 DC-DC Converter Gamma Generator VDD2 Gamma Vcom Generator VGG/VEE Source Driver FPC IC PD035VX3 TFT-LCD Panel Vcom Gate Driver IC If you use PD035VX3, you can apply PVI-2003A(Timing controller) which will gernerate timing signals to support PD035VX3. . The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:12 P-511-280(V:2) PD035VX3 11. Interface Timing 11.1) Timing Parameters AC Electrical Characteristics (VCC=VDD1=3.3V, VDD2=10V, GND=VSS1=VSS2=0V, Ta=25℃) Parameter Symbol Min. Typ. Max. Unit CLK Frequency Fclk - 25 40 MHz CLK Pulse Width TCPH 25 40 - ns Data Set-up Time Tsu 4 - - ns Data Hold Time Thd 2 - - ns Propagation Delay of DIO2/1 Tphl 6 10 15 ns Time That The Last Data to LD Tld 1 - - TCPH Pulse width of LD Twld 2 - - TCPH Time That LD to DIO1/2 Tlds 5 - - TCPH POL Set-up Time Tpsu 6 - - ns POL Hold Time Tphd 6 - - ns OE Pulse Width TOEV 1 - - µs CKV Pulse Width TCKV 500 - - ns STV Set-up Time TSUV 400 - - ns STV Hold Time THDV 400 - - ns Horizontal Display Period THDP - 640 - TCPH Horizontal Period Timing Range THP - 800 - TCPH Horizontal Lines Per Field TV 520 525 640 THP Vertical Display Timing Range TDV - 480 - THP The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:13 P-511-280(V:2) 30% DIO1/2 Fig. 11-1 Horizontal timing(1) PD035VX3 (Output) data Last Second data REV Thd Tsu 11.2) Timing Diagram 70% First data Data 70% 70% Thd Tsu 640 70% 639 70% 2 70% 1 CLK DIO1/2 (Input) 70% Tphl Tphl 70% The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:14 Tcph P-511-280(V:2) T ld Positive Odd outputs PD035VX3 Fig. 11-2 Horizontal timing(2) Negative High-z High-z High-z Even outputs 70% 70% 70% POL 30% 30% 30% Tpsu Tphd Tphd Tpsu Tpsu Tphd 70% 7 0% 70% LD 70% Tlds 70% Twld 70% LD DIO 1/2 (Input) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:15 70% Last CLK P-511-280(V:2) Fig. 11-3 Vertical shift clock timing OE TSUV CKV STVU/STVD 50% TOEV THDV TCKV 50% PD035VX3 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:16 P-511-280(V:2) Fig. 11-4 Vertical timing POL(Even Field) POL(Odd Field) STVU/STVD (VSY) (HSY) THP THDP PD035VX3 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:17 P-511-280(V:2) PD035VX3 12. Power On Sequence V V SS(0 V GG V DD2 D D 1 ,V C C V) V O FF EE OFF O N T1 T3 L o g ic s ig n a l R G B -V id e o s ig n a l T2 T4 O FF OFF B la c k lig h t ON 10m s 10m s 1) 10ms≦T1＜T2 2) 0ms＜T3≦T4≦10ms 13. Optical Characteristics 13-1) Specification: Parameter Horizontal Viewing Angle Vertical Contrast Ratio Response time Symbol θ21,θ22 θ12(to 12 o’clock) θ11(to 6 o’clock) CR Rise Fall Brightness Uniformity Cross Talk White Chromaticity LED Life Time Tr Tf L U x y - Condition CR＞10 At optimized Viewing angle θ=0° θ=0° 9 point θ=0° θ=0° - MIN. TYP. MAX. ±45 ±50 - Unit deg Ta=25℃ Remarks 10 15 - deg 30 35 - deg 200 400 - - Note 14-4 170 70 0.28 0.30 - 15 25 200 75 0.31 0.33 30000 30 50 3.0 0.34 0.36 - ms ms Note 14-3 cd/㎡ % % hrs Note 14-2 Note 14-1 Note 14-5 Note 14-6 Note 14-1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:18 P-511-280(V:2) PD035VX3 All the optical measurement shall be executed 1 minute after backlight being turn-on. The optical characteristics shall be measured in dark room (ambient illumination on panel surface less than 1 Lux). The measuring configuration shows as following figure. Photometer (TOPCON BM-5A or BM-7 fast) 500 mm +/- 50 mm Field =1° TFT-LCD module DC/AC Inverter Optical characteristics measuring configuration Note 14-1: 1.Topcon BM-5A or BM-7 fast luminance meter 1° field of view is used in the testing . Note 14-2: The definitions of viewing angles are as follow The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:19 P-511-280(V:2) PD035VX3 Note 14-3: Definition of Response Time Tr and Tf: White Black White 100% 90% Brightness 10% 0% Tr Tf Note 14-4: The definition of contrast ratio CR = Luminance at gray level 63 Luminance at gray level 0 Note 14-5 : The uniformity of LCD is defined as The Minimum Brightness of the 9 testing Points U= The Maximum Brightness of the 9 testing Points Luminance meter : BM-5A or BM-7 fast (TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module The test pattern is white (Gray Level 63). 1 /6 2 /6 2 /6 1 /6 1 /6 2 /6 2 /6 1 /6 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:20 P-511-280(V:2) PD035VX3 YA-YB YA YA : Brightness of Pattern A YB : Brightness of Pattern B Note 14-6 : Cross Talk (CTK) = ×100% Pattern A Pattern B (Gray Level 31) (Gray Level 31, central black box exclusive) YA YB 1/3 1/3 1/3 1/3 1/3 1/3 Black : Testing Point (A and B are at the same point.) (Gray Level 0) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:21 P-511-280(V:2) PD035VX3 15. Handling Cautions 15-1) Mounting of module a) Please power off the module when you connect the input/output connector. b) Polarizer which is made of soft material and susceptible to flaw must be handled carefully. c) Protective film (Laminator) is applied on surface to protect it against scratches and dirt. It is recommended to peel off the laminator before use and taking care of static electricity. 15-2) Precautions in mounting a) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. b) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. c) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 15-3) Precautions about touch panel a) Input must be performed through a special designed stylus only. Do not pile up the products or put any heavy things on it. 15-4) Others a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) Store the module at a room temperature place. c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:22 P-511-280(V:2) PD035VX3 16. Reliability Test No 1 Test Item High Temperature Storage Test Test Condition Ta = +70℃, 240 hrs 2 Low Temperature Storage Test Ta = -30℃, 240 hrs 3 High Temperature Operation Test Ta=+60℃, 240 hrs 4 Low Temperature Operation Test Ta=-20℃, 240 hrs 5 6 High Temperature & High Humidity Operation Test Thermal Cycling Test (non-operating) 7 Vibration Test (non-operating) 8 Shock Test (non-operating) 9 Electrostatic Discharge Test (non-operating) 10 11 Hitting Durability Test ( Touch panel) Sliding Durability Test ( Touch panel) Ta = +60℃, 90%RH, 240 hrs (No Condensation) -20℃+70℃, 100 Cycles 30min 30min Frequency : 10 ~ 55 HZ Amplitude : 1.0 mm Sweep time : 11 mins Test Period : 6 Cycles for each direction of X, Y, Z 100G , 6ms Direction : ±X , ±Y , ±Z Cycle : 3 times 200pF, 0Ω ±200V 1 time / each terminal 1,000,000 times, with R 8.0 mm silicon rubber, 200g, 3times/sec 100,000 times, with R 0.8 mm polyacetal stylus, 200g, 60mm/sec Ta: ambient temperature [Criteria] In the standard conditions, there is not display function NG issue occurred. (including : line defect ,no image). All the cosmetic specification is judged before the reliability stress. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:23 P-511-280(V:2) PD035VX3 17. Packing The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:24 P-511-280(V:2) PD035VX3 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:25 P-511-280(V:2) PD035VX3 Revision History Rev. 0.1 Issued Date Apr. 12 , 2005 Revised Contents Preliminary 1.0 July.15 , 2005 Release version 2.0 Nov.30, 2006 Page 19 13. Optical Characteristics Brightness from typ.=210(cd/㎡),min.=180(cd/㎡) Modify to typ.=200(cd/㎡),min.=170(cd/㎡) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:26 P-511-280(V:2) PD035VX3 Appendix VLED (Pin 04) 15 + 0.5V VLED (Pin 02) 15 + 0.5V 0.1μF 47μF 25V LED 0.1μF 47μF 25V LED 20K 5% 20K 5% VC1 GLED1 (Pin 01) VC2 VB2 VB1 1KVR 2SC2412 1KVR 20mA , 1V 0.1μF 20mA , 1V VE2 2K 5% 49.9 Ω,1% 1/16W 2SC2412 0.1μF VE1 2K 5% GLED2 (Pin 03) 49.9 Ω,1% 1/16W The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:27