MD005 THRU MD10 SINGLE PHASE GLASS PASSIVATED SURFACE MOUNT BRIDGE RECTIFIER VOLTAGE:50 TO 1000V CURRENT:0.8A FEATURE MDF For surface mount application Reliable low cost construction utilizing molded plastic Technique Surge overload rating:30 A peak MECHANICAL DATA Terminal: Plated leads solderable per MIL-STD 202E, method 208C Case:UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: Polarity symbol marked on body Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated, for capacitive load, derate current by 20%) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current at Ta =40°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage at forward current 0.4A Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =125°C Typical Junction Capacitance (Note1) Typical Thermal resistance (Note2) (Note3) Operating Junction Temperature Range Storage Temperature Range Vrrm Vrms VDC MD 005 50 35 50 MD 01 100 70 100 MD 02 200 140 200 MD 04 400 280 400 MD 06 600 420 600 MD 08 800 560 800 MD 10 1000 700 1000 Units V V V If(av) 0.8 A Ifsm 30.0 A Vf 1.0 V 5.0 500.0 15.0 76 20 -55 to +150 -55 to +150 µA uA Ir Cj Rth(ja) Rth(jl) Tj Tstg Pf °C/W °C °C Note: 1. 1Measured at 1.0 MHz and applied voltage of 4.0 volt 2. On aluminum substrate 3. Junction to lead RATINGS AND CHARACTERISTIC CURVES MD005 THRU MD10 Rev.A7 www.gulfsemi.com 2 Rev.A7 www.gulfsemi.com