MD12 SINGLE PHASE GLASS PASSIVATED SURFACE MOUNT BRIDGE RECTIFIER VOLTAGE: 1200V CURRENT:0.8A FEATURE MDF For surface mount application Reliable low cost construction utilizing molded plastic Technique Surge overload rating:30 A peak MECHANICAL DATA Terminal: Plated leads solderable per MIL-STD 202E, method 208C Case:UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: Polarity symbol marked on body Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated, for capacitive load, derate current by 20%) SYMBOL MD12 Units Maximum Recurrent Peak Reverse Voltage Vrrm 1200 V Maximum RMS Voltage Vrms 840 V Maximum DC blocking Voltage VDC 1200 V Maximum Average Forward Rectified Current at Ta =40°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage at forward current 0.4A Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =125°C Typical Junction Capacitance If(av) 0.8 A Ifsm 30.0 A Vf 1.0 V Ir 5.0 500.0 µA Cj 15.0 Pf Tj -55 to +150 °C Tstg -55 to +150 °C Operating Junction Temperature Range Storage Temperature Range Note: 1. Measured at 1.0 MHz and applied voltage of 4.0 volt Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES MD12 Rev.A1 www.gulfsemi.com