KBPC3005 THRU KBPC310 SINGLE PHASE SILICON BRIDGE RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 3.0 Ampere FEATURES ● ● KBPC3 Diffused Junction Surge overload rating: 50A peak MECHANICAL DATA Case: UL-94 Class V-0 recognized Flame Retardant Epoxy Terminals : Plated leads solderable per MIL-STD 202, method 208 ● Mounting Position: Any ● Marking: Type Number ● ● Dim ensions in inches and (m ilim eters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. Characteristic Symbol Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 1) @TC = 50°C KBPC KBPC KBPC KBPC KBPC KBPC KBPC 3005 301 302 304 306 308 310 Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V IO 3.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 50 A Forward Voltage per leg VFM 1.1 V IR 5.0 500 µA I2t Rating for Fusing (t<8.3ms) (Note 2) I2t 10 A 2s Typical Junction Capacitance (Note 3) Cj 25 pF 10 °C/W -65 to +125 °C Peak Reverse Current At Rated DC Blocking Voltage @IF = 1.5A @TA = 25°C @TA = 125°C Typical Thermal Resistance per leg (Note 1) Operating and Storage Temperature Range R JC Tj, TSTG Note: 1. Mounted on metal chassis. 2. Non-repetitive, for t > 1ms and < 8.3ms. 3. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. KBPC3005 THRU KBPC310 10 3.0 Resistive or Inductive load IFSM, FORWARD CURRENT (A) IAVE, AVERAGE FORWARD OUTPUT CURRENT (A) RATINGS AND CHARACTERISTIC CURVES Mounted on Metal chassis 2.0 Mounted on PC Board 1.0 1.0 0.1 Tj = 25°C 0 25 0.01 50 75 100 125 0 0.4 0.8 1.6 1.2 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics, per element TC, CASE TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve TC = 50°C IR, INSTANTANEOUS REVERSE CURRENT (µA) IF, PEAK FORWARD SURGE CURRENT (A) 60 Single half sine-wave JEDEC method 50 40 30 20 10 0 1.0 Pulse width = 300µs 10 100 NUMBER OF CYCLES AT 60Hz Fig. 3 Max Non-Repetitive Peak Fwd Surge Current 10 Tj = 100°C 1.0 0.1 Tj = 25°C 0.01 0 40 80 120 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics, per element