RFMA1720-0.5W 17.5 – 20.0 GHz Power Amplifier MMIC ISSUED 05/08/2008 FEATURES • • • • 17.5– 20.0GHz Operating Frequency Range 26.5dBm Output Power at 1dB Compression 30.0 dB Typical Small Signal Gain -41dBc Typical OIM3 @ each tone Pout 15dBm Excelics RFMA1720 -0.5W-01 APPLICATIONS • • Point-to-point and point-to-multipoint radio Military Radar Systems Caution! ESD sensitive device. ELECTRICAL CHARACTERISTICS (Ta = 25 °C, 50 ohm, Vdd=7V, Vgg=-5V) SYMBOL F P1dB GSS OIMD3 Input RL Output RL PARAMETER/TEST CONDITIONS MIN TYP MAX UNITS 20 GHz Operating Frequency Range 17.5 Output Power at 1dB Gain Compression 25.5 26.5 dBm Small Signal Gain Output 3rd Order Intermodulation Distortion @∆f=10MHz, Each Tone Pout 15.0 dBm 27.0 30.0 dB -41 -38 dBc Input Return Loss -10 -7 dB Output Return Loss -8 Idd Drain Current Vdd dB 500 570 mA Drain Supply Voltage 7 8 V Rth Thermal Resistance (Au-Sn Eutectic Attach) 13 Tb Operating Base Plate Temperature o C/W -30 +80 ºC MAXIMUM RATINGS @25°C SYMBOL CHARACTERISTIC ABSOLUTE CONTINUOUS 1,2 VDD Drain Supply Voltage 12V 8V VGG Gate Supply Voltage -8V -3V IDD Drain Current Idss 1.1A IGG Gate Current 60mA 10 mA PIN Input Power 20dBm @ 3dB compression TCH Channel Temperature 175°C 150°C TSTG Storage Temperature -65/175°C -65/150°C 8.8W 7.4W PT Total Power Dissipation 1. Operating the device beyond any of the above rating may result in permanent damage. 2. Bias conditions must also satisfy the following equation Vdd*Idd < (TCH –Tb)/RTH; where Tb = operating base plate temperature Specifications are subject to change without notice. Excelics Semiconductor, Inc. 310 De Guigne Drive, Sunnyvale, CA 94085 Phone: 408-737-1711 Fax: 408-737-1868 Web: www.excelics.com page 1 of 2 Revised May 2008 RFMA1720-0.5W 17.5 – 20.0 GHz Power Amplifier MMIC ISSUED 05/08/2008 01 Package Outline 0.330 4X.050 CHAMFER 0.165 2X DIA .090 THRU 0.200 PIN1 Indicator NC NC Vgg 4X 0.100 RF IN 4X 0.050 Excelics RFMA1720 -0.5W-01 Vdd 10X 0.013 RF OUT Vgg Vdd NC NC 10X 0.100±0.010 0.060 10X 0.004 0.040 0.025 All dimensions in inches ORDERING INFORMATION Part Number RFMA1720-0.5W-01 Refer 01 Package Outline DISCLAIMER EXCELICS SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. EXCELICS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN. LIFE SUPPORT POLICY EXCELICS SEMICONDUCTOR PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF EXCELICS SEMICONDUCTOR, INC. AS HERE IN: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Specifications are subject to change without notice. Excelics Semiconductor, Inc. 310 De Guigne Drive, Sunnyvale, CA 94085 Phone: 408-737-1711 Fax: 408-737-1868 Web: www.excelics.com page 2 of 2 Revised May 2008