FC SERIES PT TYPE ALARM SETTER DATA SHEET PTP The FC series PT type alarm setter accepts one or two input signal, compares internal or external setting signal, and outputs alarm contact signals of upper limit or lower limit. Its structure is plug-in style. SPECIFICATIONS INPUT SPECIFICATION Input signal: Input for monitor 2 points (Max.) Input for external setting 2 points (Max.) Input type Voltage Current Input signal 1 to 5V DC 4 to 20mA DC Input resistance 1 MΩ or over 250Ω ALARM SETTING SPECIFICATION Internal setting: By built-in trimmer resistor External setting: By external signal OUTPUT SPECIFICATION Output signal: 2 points (Max.) Output type: Relay contact output Contact capacity: 24V / 0.5A DC, 100V/ 0.4A AC 200V/ 0.2A AC or less (resistance load) POWER SUPPLY Power supply: 24V DC (20 to 30V DC) 24V AC, +13%, –10%,(47 to 63Hz) 100V AC (85 to 132V AC / 47 to 63Hz) 200V AC (187 to 264V AC / 47 to 63Hz) as specified. Power consumption: Approx. 2W (at DC power) Approx. 6VA (at AC power) OPERATION CONDITION Ambient temperature: 0 to 50°C Ambient humidity: Less than 90%RH (no condensation) Outline dimension (HxWxD): 96 x 52 x 130mm Mass: Appox. 300g Housing: Plastic housing (color: black) Mounting method: Panel mounting or DIN rail mounting CHARACTERISTICS Accuracy: Less than ± 0.2% of full span Reproducibility: Less than ± 0.1% of full span Hysteresis width: Approx. 0.3% of full span Response time: Less than 0.2 sec. Dielectric strength: 1500V AC, 1 min. (Input - Output - Power - Ground) Insulation resistance: 500V DC, 100MΩ or over (Input - Output - Power - Ground) Ambient temperature effect: Less than ± 0.15% of full span/10°C Power regulation effect: Less than ± 0.15% of full span CODE SYMBOLS 1 2 3 4 5 6 7 8 P T P 9 10 Description 1 Input signal 1 to 5V DC 4 to 20mA 1 2 Output signals 1 point 2 points 1 2 Alarm setting system Internal setting External setting A B Power supply 24V DC / 24V AC (50/60Hz) 100V AC (50/60Hz) 200V AC (50/60Hz) 1 2 3 1st alarm specifications Excitation ON (upper limit alarm) Excitation ON (lower limit alarm) Excitation OFF (upper limit alarm) Excitation OFF (lower limit alarm) Non- Excitation ON (upper limit alarm) Non- Excitation ON (lower limit alarm) Non- Excitation OFF (upper limit alarm) Non- Excitation OFF (lower limit alarm) 1 2 3 4 5 6 7 8 0 1 2 3 4 5 6 7 8 2nd alarm specifications None (The 5th digit : 1) Excitation ON (upper limit alarm) Excitation ON (lower limit alarm) Excitation OFF (upper limit alarm) Excitation OFF (lower limit alarm) Non- Excitation ON (upper limit alarm) Non- Excitation ON (lower limit alarm) Non- Excitation OFF (upper limit alarm) Non- Excitation OFF (lower limit alarm) EDS9-26a Date Feb. 20, 1996 PTP FUNCTIONAL DIAGRAM Internal Setting 31 Output 1 Comparator 1 11 32 Monitor input 1 12 21 22 Setting 1 41 Output 2 Comparator 2 42 13 Monitor input 2 14 23 24 Setting 2 Power supply circuit 43 Power supply 44 34 External setting 31 Output 1 Comparator 1 11 32 Monitor input 1 12 21 Setting input 1 41 22 Output 2 Comparator 2 42 13 Monitor input 2 14 23 Setting input 2 24 Power supply circuit 43 Power supply 44 34 OUTLINE DIAGRAM (Unit: mm) Terminal screw M2.5 (for transmission) 35 74 Main unit 94 Terminal screw M4 Terminal 2 48 52 100 Stopper 130 Panel mounting DIN rail mounting 2-M4 DIN rail 40 52 EXTERNAL CONNECTION DIAGRAM INPUT 1 INPUT 2 + 11 12 + 13 14 EXT. SP1 EXT. SP2 + 21 22 + 23 24 5 6 31 32 33 34 OUTPUT 1 41 42 43 44 + - OUTPUT 2 POWER RANGE OF DELIVERY Main unit and socket Stopper PTP Caution on Safety *Before using this product, be sure to read its instruction manual in advance. Head Office Gate City Ohsaki, East Tower, 11-2, Osaki 1-chome, Shinagawa-ku, Tokyo 141-0032, Japan http://www.fesys.co.jp/eng Instrumentation Div. International Sales Dept. No.1, Fuji-machi, Hino-city, Tokyo, 191-8502 Japan Phone: 81-42-585-6201, 6202 Fax: 81-42-585-6187 http://www.fic-net.jp/eng Information in this catalog is subject to change without notice. Printed in Japan