SERIES ULTRASONIC FLOWMETER < > DATA SHEET FSV, FLS/FSG/FSD This flowmeter is a clamp-on type ultrasonic flow meter based on transit-time measuring method. Making full use of the latest electronics and digital signal processing technologies, we realized a compact and lightweight design, and improved the accuracy and easiness to use while keeping with anti-bubble performance. The communication function (MODBUS: Option) is also applicable. FEATURES 1.Compact and light-weight Thanks to the adoption of the latest electronics the flow transmitter size and mass are 1/3 of our traditional instrument. 2.Full variety of sensors The flowmeter can be used with various types of sensors applicable for wide range of pipe size (ø13 to ø6000mm) and fluid temperature (-40 to +200°C). 3.High accuracy The flowmeter is designed for high accurary (better than ±1.0% of rate) by dynamic correction of fully-developed flow profile. Reynolds Number is calculated and a meter factor (K) is automatically applied for best accuracy at all flow velocities. Further, the adoption of new sound velocity measurement system permits measurements of fluids of unknown sound velocity. Moreover, affection from fluid temperature and pressure is negligible (AutoTemp./Press. compensation). 4.Excellent resistance against aerated flow Fuji's unique ABM feature improves measurement reliability for different flow like slurries, sludge, raw sewage and bubble-contained flow (acceptable up to air bubble of 12% volume at 1m/s velocity). 5.Quick response With the use of high-speed micro-processor suited for digital signal processing, the fast response time is realized. 6.Multi-lingual The following languages are supported for display: Japanese (Katakana), English, German French, and Spanish. 7.Excellent performance and easy operation LCD and function keys are allowing easy configuration and trouble shooting. − LCD with back light − Easy mounting of sensor − Trouble shooting − Easy operation with keypad on the front surface of the flow transmitter (FSV···S) Flow transmitter (FSV···S) Detector (FLSE12) (FLSE22) Detector (FSD22) Detector (FSD32) Detector (FSG) SPECIFICATIONS Operational specifications System configuration: Single-path system of a flow transmitter (Model FSV) and a detector (Model FLS/FSG/FSD) Applicable fluid: Homogenous liquid where the ultrasonic signal can be transmitted Bubble quantity: 0 to 12vol% (for pipe size 50A, water, velocity 1m/s) Fluid turbidity: 10000mg/L max. Type of flow: Fully-developed turbulent or laminar flow in a full-filled pipe Flow velocity range: 0 to ±0.3 ... ±32m/s EDSX6-140d Date Apr. 1, 2011 FSV, FLS/FSG/FSD Common type Popular type Detector Pipe size Applicable pipe (inner diameter) material Mounting Fluid method temperature range (Note 3) 9th digit in ø25 to ø100 mm Plastic (PVC, etc.) (Note 1) code symbol FLSE12 Metal pipe (SS, steel pipe, Y... -20 to ø50 to ø100 mm copper pipe, aluminum pipe, +100°C etc.) (Note 2) V method A... 0 to Plastic (PVC, etc.) (Note 1) +120°C Metal pipe (SS, steel pipe, (Note 4) FLSE22 ø50 to ø225 mm copper pipe, aluminum pipe, Heat shock etc.) (Note 2) resistance 150°C, 30min -40 to 100°C FSD22 ø13 to ø100 mm V method FSGS3 ø50 to ø300 mm Plastic (PVC, etc.) (Note 1) ø200 to Metal pipe (SS, steel pipe, FSGS41 ø1200 mm -40 to 80°C copper pipe, aluminum pipe, V or Z method ø200 to etc.) (Note 2) FSGS5 ø6000 mm FSD32 ø50 to ø400 mm -40 to 200°C Note 1: If the pipe material is PP or PVDF, select FSGS31, FSGS41 or FSGS5. Note that the wall thickness is 15mm or less for PP, and 9mm or less for PVDF. Note 2: For cast iron pipe, lining pipe, old steel pipe or others through which the ultrasonic signal could not be transmitted easily, select FSGS31,FSGS41 or FSGS50. Lining material: Tar epoxy, mortar, rubber, etc. * In case the lining is not glued to a pipe, the measurement may be impossible. Straight pipe length: Typically 10D for upstream and 5D for dowstream. (D: Pipe inner diameter) Refer to conditions on straight pipe for details (Japan Electric Measuring Instruments Manufacturers' Association Standard JEMIS-032). Note 3: If silicone-free grease is used as acoustic coupler, the fluid temperature range is 0 to 60°C regardless of the detector. Note 4: When the 9th digit in the code symbol is “A”, the applicable piping diameter is up to 150mm. 2 Performance specifications Rated accuracy: Detector Pipe size (diameter) Applicable pipe material ø25 to ø50 mm Plastic FLSE12 ø50 to ø100 mm Popular type 100 to 240V AC +10%/-15%, 50/60Hz; or 20 to 30V DC Signal cable (between detector and converter): Coaxial cable (5m standard, 300m (60m for popular detector (FLS)) max.) Heat resistance: 80°C Installation environment: Non-explosive area without direct sunlight, corrosive gas and heat radiation. Ambient temperature: Flow transmitter: -20 to +55°C Detector: -20 to +60°C -20 to +80°C (for FLSE22-A only) Ambient humidity: 95%RH max. Grounding: Class D (100 Ω) Arrester: Provided as standard at output and power supply Applicable piping and fluid temperature: ø50 to ø100 mm Metal pipe FLSE22 ø50 to ø225 mm ø13 to ø50 mm FSD22 ø50 to ø100 mm FSGS32 ø50 to below ø300 FSD32 FSGS51 ø300 to ø6000 mm FSGS31 ø50 to below ø300 FSGS41 FSGS50 ø300 to ø6000 mm Flow velocity Accuracy 2 to 32m/s 0 to 2m/s 2 to 32m/s 0 to 2m/s 2 to 32m/s 0 to 2m/s 2 to 32m/s 0 to 2m/s 2 to 32m/s Metal pipe 0 to 2m/s 2 to 32m/s 0 to 2m/s 2 to 32m/s 0 to 2m/s 2 to 32m/s 0 to 2m/s Plastic, metal pipe 0.75 to 32m/s 0 to 0.75m/s 2 to 32m/s 0 to 2m/s 0.75 to 32m/s 0 to 0.75m/s ø50 to ø225 mm Plastic Common type Power supply: ±2.0% of rate ±0.04m/s ±1.0% of rate ±0.02m/s ±2.0% of rate ±0.04m/s ±1.0% of rate ±0.02m/s ±2.0% of rate ±0.04m/s ±1.5% to ±2.5% of rate ±0.03 to ±0.05m/s ±1.5% of rate ±0.03m/s ±1.0% of rate ±0.02m/s ±1.0% of rate ±0.0075m/s ±1.5% of rate ±0.03m/s ±1.5% of rate ±0.0113m/s Response time: 0.5s (standard mode) 0.2s as selected (quick response mode) Power consumption: 15VA max. (AC power supply) 6W max. (DC power supply) Functional specifications Analog signal: Digital output: 4 to 20mA DC (1 point) Load resistance: 1 kΩ max. Forward total, reverse total, alarm, acting range, flow switch, total switch assignable arbitrarily (1) Mechanical relay contact (isolated, socket provided, arrester incorporated) • Output: 1 point • Normal: Open/Close selectable • Contact capacity: 240V AC, 30V DC, 1A • Output frequency: 1P/s max. (pulse width: 50, 100, 200ms) (2) Transistor contact (isolated, open collector, arrester incorporated) • Outputs: 2 points • Normal: ON/OFF selectable • Contact capacity: 30V DC, 0.1A • Output frequency: 1000P/s max. (pulse width: 5, 10, 50, 100, 200ms) Digital input: 1 point (no-voltage contact) (option)/ Set zero, Preset total assignable Serial communication (option): RS-232C equivalent or RS-485, isolated, arrester incorporated Connectable quantity: 1 unit (RS-232C)/up to 31 units (RS-485: MODBUS) Baud rate: 9600, 19200, 38400bps Parity: None/Odd/Even selectable Stop bits: 1 or 2 bits selectable Cable length: 15m max. (RS-232C)/1km max. (RS-485) Data: Flow velocity, flow rate, forward total, reverse total, status, etc. Display device: 2-color LED (Normal: green, Extraordinary: red) LCD with 2 lines of 16 characters and back light Indication language: Japanese (Katakana)/English/French/ German/Spanish (changeable) Flow velocity/flow rate indication: Instantaneous flow velocity, instantaneous flow rate indication (minus indication for reverse flow) Numerals: 8 digits (decimal point is counted as 1 digit) Unit: Metric/Inch system selectable Velocity Metric system Inch system m/s ft/s Flow rate L/s, L/min, L/h, L/d, k L / d , M L / d , m 3/ s , m 3/min, m3/d, km3/d, Mm 3/d, BBL/s, BBL/ min, BBL/h, BBL/d, kBBL/d, MBBL/d Note: The ”gal” means USgal. gal/s, gal/min, gal/h, gal/d, kgal/d, Mgal/ d, ft3/s, ft3/min, ft3/d, Kft 3/d, Mft3/d, BBL/s, BBL/min, BBL/h, BBL/d, kBBL/d, MBBL/d Total indication: Forward or reverse total value indication (negative indication for reverse direction) Numerals: 8 digits (decimal point is counted as 1 digit) Unit: Metric/Inch system selectable Metric system Total Inch system mL, L, m3, km3, Mm3, gal, kgal, ft3, kft3, Mft3, mBBL, BBL, KBBL mBBL, BBL, kBBL, ACRE-ft Configuration: Fully configurable from the 4-key pad (ESC, , , ENT) Zero adjustment:Set zero/Clear available External zero adjustment: Set zero available upon digital input setting Damping: 0 to 100s (every 0.1s) for analog output and flow velocity/flow rate indication Low flow rate cutoff: 0 to 5m/s in terms of flow velocity Alarm: Digital output available for Hardware fault or Process fault Burnout: Analog output: Hold/Overscale/Underscale/Zero selectable Flow rate total: Hold/Count selectable Burnout timer: 0 to 100s (every 1s) Bi-directional range: Forward and reverse ranges configurable independently. Hysteresis: 0 to 10% of working range Working range applicable to digital output Auto-2 range: 2 forward ranges configurable independently Hysteresis: 0 to 10% of working range Working range applicable to digital output Flow switch: Lower limit, upper limit configurable independently Digital output available for status at actuated point Total switch: Forward total switching point configurable Digital output available when actuated External total preset: Preset total settable upon contact input setting Physical specifications Type of enclosure: Flow transmitter:FSV···S: IP66 FSV···H: IP67 (With large LCD) Detector: FLS (popular type): IP65 (When waterproot BNC connector is provided) FSG (common type): IP67 (Silicone compound is filled on the terminal part when wiring) FSG (submersible type): IP68 (submersible in water for 5 days) FSD (small diameter and high temperature type): IP52 Mounting method: Flow transmitter: Mounted on wall or by 2B pipe Detector: Clamped on pipe surface Acoustic coupler: Silicone rubber, silicone grease or siliconefree grease Note: The acoustic coupler is a medium that eliminates a gap between detector and pipe Type of acoustic coupler: Type Fluid temperature Silicone rubber (KE-348W) Silicone grease (G40M) Silicone-free Grease for grease high (HIGH Z) temperature (KS62M) -40 to +150°C -30 to +150°C 0 to +60°C -30 to +250°C Teflon piping In case of Teflon piping, use grease. Procure silicone grease (G40M), if necessary, as an optional accessory. Material: Flow transmitter: Aluminum alloy Detector: Detector Sensor housing Sensor cover Guide rail – FLSE1 PBT SUS304 – FLSE2 PBT SUS304 – FSD22 PBT Aluminum alloy + plastic FSGS3 PBT SUS304 SUS304 + plastic – FSGS41 PBT SUS304 FSGS5 FSD32 SUS304 – SUS304 + aluminum alloy 3 FSV, FLS/FSG/FSD Signal cable: FLY3 (applicable detector: FLS) •Structure: Heat-resisting high-frequency coaxial cable (3D2V) •Sheath: Flame-resisting PVC •Outer diameter: ø5mm •T ermination: M3 amp terminal (flow transmitter side) and BNC connector (sensor side) FLY8, FLY9 (applicable detector: FSG, FSD) •Structure: High frequency coaxial cable (double shield) •Sheath: Black flame-resisting PVC •Outer diameter: ø7.3mm •T ermination: M3 amp terminal (flow transmitter side) and M4 amp terminal (FLY8).Note, however, that the detecter side of FSD22 and FSD32 is provided with BNC connector (FLY9). •Mass: Approx. 90g/m Dimensions: Flow transmitter FSV···S (IP66): H170×W142×D70mm Flow transmitter FSV···H (IP67): H277×W244×D95mm Detector: H50×W228×D34mm (FLSE1) H50×W348×D34mm (FLSE2) H90×W320×D53mm (FSD22) H46×W410×D50mm (FSGS3) H46×W54×D37mm (FSGS41) H67×W78×D84mm (FSGS5) H205×W530×D52mm (FSD32) Mass: MEASURING PRINCIPLE CONFIGURATION DIAGRAM With ultrasonic pulses propagated diagonally between the upstream and downstream sensors, flow rate is measured by detecting the time difference obtained by the flow of fluid. Detector θ Flow velocity t1 (indoor type): (outdoor type): (FLSE1) (FLSE2) (FSD22) (FSGS3) (FSGS4) (FSGS5) (FSD32) PC Loader software Provided as standard •Compatible model is PC/AT compatible instrument. •Operation is undefined for PC98 series (NEC). •Main functions: Software for Main unit parameter setting/change on PC •OS: Windows 2000/XP •Memory requirement: 125MB min. •Disk unit: CD-ROM drive compatible with Windows 2000/XP •Hard disk capacity: Minimum vacant capacity of 52MB or more Note:Optional communication board (specified at the 5th digit of code symbols) and loader cable (Model ZZP*TK4J1236) are additionally necessary for RS232C serial communication. Note:USB-RS232C converter For PC that does not support RS-232C serial interface, a converter is necessary for connecting the PC and main unit. USB-RS232C converter should be combined with the above loader cable. <Recommendation> USB-CVRS9 (manufactured by Sanwa Supply) (1) Single-path system (V method) Cable Detector Upstream sensor D t2 Flow transmitter 1.5kg Flow transmitter 4.5kg Detector: 0.3kg 0.4kg 0.6kg 0.6kg 0.3kg 1.2kg 1.6kg DC 4 to 20mA Flow transmitter Output signal Digital signal (Up to 2 point) Flow transmitter (2) Single path system (Z method) Downstream sensor Cable MOUNTING OF DETECTOR Ultra sonic oscillator Plastic wedge Pipe Lining 4 Detector DC 4 to 20mA Flow transmitter Digital signal (Up to 2 point) DETECTOR SELECTION GUIDE Type Fluid Mounting temperature [°C] method -20 to 100 FLSE12 2-Y FLSE12 2-A 0 to 120 2-Y FLSE22 2-A 0 to 120 50 25 P V -20 to 100 FLSE22 Inner diameter of piping ø (mm) 13 25 50 M 50 V 200 250 300 400 1000 3000 6000 100 100 P, M 50 V FSGS32 Note) FSGS31 100 P, M 50 225 150 Px, P, M 300 V 200 Z 200 V 200 Px, P, M Z 200 Px, P, M Px, P, M 600 -40 to 80 FSGS41 FSGS51 Note) FSGS50 FSD22 -40 to 100 FSD32 -40 to 200 V 13 Px, P, M V 50 Z Classification of piping materials Px, P, M 1200 3000 6000 100 Px, P, M 150 250 Px, P, M 400 Px : PP, PVDF P : Plastic (PVC, etc.) M : Msetallic piping (steel pipe, copper pipe, aluminum, etc.) Note: The ultrasonic signal cannot be transmitted easily when the classification of piping material is Px or the turbidity is high. In such a case, a preliminary check by a portable ultrasonic flowmeter is recommended. CODE SYMBOL <Detector, small diameter/high temperature type> <Flow transmitter> 1 2 3 4 5 6 7 8 F SV Y 9 10 11 12 13 1 14 Y Description (Destination) (4th digit) Standard (English) E (Communication) (5th digit) None RS232C+DI RS485+DI Y A B (Use) (6th digit) Single measuring path Y (Power supply) (7th digit) AC100 to 240V 50/60Hz DC20 to 30V 1 4 (Case structure) (9th digit) IP66 IP67 S H 1 2 3 4 5 6 7 8 Description F SD2 2 0S 1 Small diameter sensor (ø13 to ø100) V method F SD3 2 0Y 1 High-temperature sensor *1 (ø50 to ø400) V or Z method *1: For turbid fluid or old pipe, cast iron pipe, mortar lining pipe or others through which the ultrasonic signal could not be transmitted easily, use an optional guide rail (TK4C6164C1), and carry out mounting by Z method. Applicable diameter range V method: ø50 to ø250 Z method: ø150 to ø400 Note: As standard acoustic coupler, silicone rubber (KE-348W) is provided for small diameter sensor, or grease for high temperature (KS62M) for high-temperature sensor. (Wire connection port) (10th digit) Weatherproof gland provided [G1/2 and G3/8 (internal threads)] Union (for pilica) with gland [G1/2 female screw] (when "H" is specified 9th digit) Y A (Combination with explosion-proof detector) (11th digit) None Y (Parameter setting) (12th digit) None Setting provided Setting provided + tag Tag Y A B C (Mounting method) (13th digit) Pipe mount (if the 9th digit is S) Wall mount Pipe mount (if the 9th digit is H) A B C N E A (Area) (14th digit) America Europe, Middle East, Africa Asia 5 FSV, FLS/FSG/FSD CODE SYMBOL <Detector, common type> 1 2 3 4 5 6 7 8 9 10 11 12 13 F SGS Y Y1 3 3 4 5 5 1 <Detector, popular type> Description Type (5th and 6th digits) Small sensor 2MHz (ø50 to ø300) V method Small sensor 1MHz (ø50 to ø300)*2 Middle sensor 1MHz (ø200 to ø1200) V or Z Large sensor 1MHz (ø200 to ø6000) method Large sensor 0.5KHz (ø200 to ø6000)*2 2 1 1 1 0 Acoustic coupler (10th digit) None*5 Silicon rubber (KE348) Silicone-free grease (HIGH-Z) (Note 2) Silicone grease (G40M) (Note 2) Additional specification (11th digit) None Tag plate Y A B C Y A Wire rope for mounting (12th digit) Specify it in the case of FSGS41 or FSGS5. None Nominal diameter: up to ø500mm Nominal diameter: up to ø1000mm Nominal diameter: up to ø1500mm Nominal diameter: up to ø3000mm Can be specified Nominal diameter: up to ø6000mm only for FSGS5 Y A B C D E *2: For aging pipes, cast iron pipes or mortar-lined pipes that interrupts the propagation of ultrasonic signals, select FSGS31 or FSGS50. *3: Procure type FLY for the signal cable. *5: Silicone rubber (KE-348W) is provided as a standard accessory to fill the wiring mold. (It can also be used as an acoustic coupler.) If an additional acoustic coupler is required, select one among A, B and C. <Detector, submersible type> 1 2 3 4 5 6 7 8 F SGS 9 10 11 12 13 A1 3 3 4 5 5 1 Description Type (5th and 6th digits) Small sensor 2MHz (ø50 to ø300) V method Small sensor 1MHz (ø50 to ø300)*2 Middle sensor 1MHz (ø200 to ø1200) V or Z Large sensor 1MHz (ø200 to ø6000) method Large sensor 0.5KHz (ø200 to ø6000)*2 2 1 1 1 0 Dedicated signal cable (9th digit) 10m 20m 30m 40m 50m 60m 70m 80m 90m 100m 110m 120m 130m 140m 150m Specified length (Contact us if length is more than 150m. Max. length is 300m.) Acoustic coupler (10th digit) Silicon rubber (KE348) Silicone grease (G40M) (Note 2) Additional specification (11th digit) None Tag plate B C D E F G H J K L M N P Q R Z A C Y A Y A B C D E Wire rope for mounting (12th digit) Specify it in the case of FSGS41 or FSGS5. None Nominal diameter: up to ø500mm Nominal diameter: up to ø1000mm Nominal diameter: up to ø1500mm Nominal diameter: up to ø3000mm Can be specified Nominal diameter: up to ø6000mm only for FSGS5 *2: For aging pipes, cast iron pipes or mortar-lined pipes that interrupts the propagation of ultrasonic signals, select FSGS31 or FSGS50. 6 1 2 3 4 5 6 7 8 F L SE 9 10 3 Description Type (4th, 5th and 6th digits) Small diameter sensor, 2MNz (ø25 to ø100mm) Small sensor, 2MHz (ø50 to ø225mm) (Note 1) 1 2 2 2 V method Acoustic coupler (7th digit) (Note 2) None Silicone rubber Silicone-free grease Y A B Fluid temperature range (9th digit) -20 to +100°C 0 to +120°C Y A Y B Optional specification (10th digit) None Tag Note 1: When the 9th digit in the code symbol is “A”, the applicable piping diameter is up to 150mm. Note 2: Normally select silicone rubber as acoustic coupler. Silicone rubber in tube (100g) is furnished. If you place an order for several units, 1 tube may suffice for every 5 units. Select silicone-free grease for semiconductor manufacturing equipment or the like that is vulnerable to silicone. The silicone-free grease is water-soluble and, therefore, cannot be used in environment exposed to water or on piping subjected to a condensation. Since the grease does not set, a periodic maintenance (cleaning, refilling every about 6 months at normal temperature) is necessary. CODE SYMBOL <Signal cable> • For detector FSG and FSD • For detector FLS 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 F L Y Type of sensor (4th digit code) (for FLS) 3 0 0 0 0 0 0 0 0 0 Z 0 1 1 2 2 3 4 5 6 Z 5 0 5 0 5 0 0 0 0 Z 1 F L Y Description 8 9 Cable length (5, 6 and 7th digit) 5m 10 m 15 m 20 m 25 m 30 m 40 m 50 m 60 m Others (contact us) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 Z Conditions on straight pipe Description Type of sensor (4th digit) Small and large sensor (for FSG) Small dia and hight temp sensor (for FSD) 0 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 0 1 2 3 4 5 Z 5 0 5 0 5 0 5 0 5 0 5 0 5 0 5 0 5 0 5 0 0 0 0 0 0 Z Cable length (5,6 and 7th digit) 5m 10 m 15 m 20 m 25 m 30 m 35 m 40 m 45 m 50 m 55 m 60 m 65 m 70 m 75 m 80 m 85 m 90 m 95 m 100 m 110 m 120 m 130 m 140 m 150 m Others (contact us) Note: Must be procured unless the sensor is a submersible type. ( D : Inside diameter of pipe) Classification Upstream side Downstream side 90 bend 10D or more L 5D L 10D 10D or more Detector Tee L 10D L 50D 0.5D or more 10D or more L 30D L 5D D Diffuser 1.5D L 10D L 50D Reducer L 30D L 10D Various Valve In case that flow control valve exists on upstream side. In case that flow control valve exists on downstream side. Stop valve Check valve L 50D Pump P (Note) The source : JEMIS-032 7 FSV, FLS/FSG/FSD OUTLINE DIAGRAM (Unit:mm) U bolt (M8) (option) 75 142 70 1 2- Mtg. hole 1 10 ø9 72 10 9 2.5 U bolt (M8) (option) Mtg. plate 20 2.5 312 277 ENT ESC 220 170 200 (233) Ultrasonic Flow Meter 25 TIME DELTA-C SS tag (option) Cable gland Mtg. pipe Bracket (option) 153 14 5.7 Earth terminal (M4) 230 Earth terminal (M4) 95 39 Mtg. pipe For sensor cable (PF3/8) 40 For power supply & output cable (PG13.5) 40 40 Flow transmitter : FSV···S (IP66) Flow transmitter : FSV···H (IP67) SS tag (option) (50) H L Sensor BNC connector Frame 34 Spacing Pipe size (mm) L H Spacing Mass. approx (kg) FLSE12 25 to 100 228 31 21 to 120 0.3 FLSE22 50 to 225 348 30 21 to 240 0.4 Type Detecter (type : FLSE 2) (popular type) 8 28 Lock clip (Adjustable every 3mm) 40 For sensor cable (PF1/2) For power supply & output cable (PF1/2) OUTLINE DIAGRAM (Unit:mm) Saddle Connector Scale(inch) Saddle Scale(mm) Name plate 320 Lock nut Element holder Lock nut Element holder inch Cursor 530±2 Distance between two sensors 0 to 133 Scale (mm) Distance between two sensors 0 to 330 mm Connector Scale (inch) Cursor 36 φ26 33±0.5 90 max. 90max. 205max. 52.5 Detector FSD22 (Small diameter sensor) 44±1 Detector FSD32 (High-temperature sensor) 5 Frame Sensor 410±2 400 5 Sensor 410±2 400 5 5 P L (cable length (m) : specified by order) Frame P Name plate Name plate 47 Spacing : 0 to 270 47 Spacing : 0 to 270 50±1 33 Chain 50±1 33 46±1 Mounting spring Chain 46±1 Mounting spring (10) VIEW FROM P (Common type) Frame guide (Submersible type) Detector FSGS3 (Small sensor) Name plate 84±1 84±1 Name plate 114 114 Wire rope 78±1 Sensor Mounting spring L(cable length (m) : specified by order) Wire rope Mounting spring Ø19 67±1 ø19 78±1 Sensor 67±1 (10) Frame guide VIEW FROM P (Common type) (Submersible type) Detector FSGS5 (Large sensor) 9 FSV, FLS/FSG/FSD OUTLINE DIAGRAM (Unit:mm) Name plate 54±1 Name plate 114 54±1 Sensor 114 Sensor Wire rope L (cable length (m) : specified by order) (Common type) Ø19 46±1 Ø19 46±1 37±1 Wire rope Mounting spring 37±1 Mounting spring (Submersible type) Detector FSGS41 (Middle sensor) Signal cable : FLY3 (For FLS) Signal cable : FLY8 (For FSG) ø15 8 BNC connector 41 3-ø4.3 To Detector 30 To Detector L (cable length (m) : specified by order) L (cable length (m) : specified by order) ø11 ø5 ø7.3 To Flow transmitter To Flow transmitter L : By specification when ordered. ø3. 2 3-ø3.2 L : By specification when ordered. 5.5 5.5 Signal cable : FLY9 (For FSD) Loader cable : ZZP*TK4J1236 34 Connector ø14.5 46 BNC connector 67 30 To Detector To Flow transmitter 3-ø3.2 10 To Personal computer ø7.3 3.2±0.2 (m) L (cable length (m) : specified by order) ø11 5.5 L : By specification when ordered. ø6.9 To Flow transmitter Terminal cap (Red) 3ø3 .2 Terminal cap (Yellow) Terminal cap (Black) 5.5 Red Yellow Black TXD RXD COM RS-232C CONNECTION DIAGRAM <Flow transmitter> Earth terminal (M4) <Detector> AC power supply 1 2 L N 3 DC power supply 4 AC100 to 240V 50/60Hz 1 1 2 + − 1 4 DI1 DC20 to 30V 2 3 4 5 6 7 8 9 − + − + − + − GND HF1 GND HF2 DO2 TR out DO3 RELAY 11 12 13 *1 SH I out Max. DC30V, 0.1A Max. AC240V/ DC30V, 1A 2 *1 SH To downstream-side sensor 3 + 4 SHILD TXDR2 TXDR1 Status input (DI) + DO1 TR out 10 G Option 3 RS-485 To flow transmitter 1 2 3 4 DI1 GND RXD TXD Status input (DI) RS-232C To upstream-side sensor *1) Only for double shield coaxial cable (type FLY8, 9) SCOPE OF DELIVERY ITEMS DESIGNATED ORDERING •Flow transmitter (provided with U-bolt and nuts for pipe mount) •Detector (provided with mounting fixture and acoustic coupler) *The acoustic coupler is option for popular type detectors. •Signal cable •CD-ROM (contains instruction manual, loader software) 1.Detector code symbols 2.Flow transmitter code symbols 3.Signal cable code symbols 4.For large sensor: Mounting pipe size 5.Tag No. as necessary 6.If parameter setting is specified, send back the attached parameter specification table duly filled. OPTIONAL ACCESSORIES Name Drawing No. 1 Guide rail for high-temperature sensor ZZP*TK4C6164C1 2 PC Loader cable ZZP*TK4J1236C1 3 Silicon grease (G40M) ZZP*45231N5 4 Silicone rubber (KE 348W) ZZP*45735N2 5 Silicone-free grease (HIGH Z) ZZP*TK7M0981P1 6 High-temperature grease (KS62M) ZZP*TK7G7983C1 7 Fuse for AC power ZZP*TK7N3827P8 8 Fuse for DC power ZZP*TK7J1005P1 9 Wire rope for mounting the sensor Spring ZZP*TK745007P1 Wire rope Nomal diameter: up to ø500mm ZZP*TK464686C1 Nomal diameter: up to ø1000mm ZZP*TK464686C2 Nomal diameter: up to ø1500mm ZZP*TK464686C3 Nomal diameter: up to ø3000mm ZZP*TK464686C6 Nomal diameter: up to ø6000mm ZZP*TK464686C13 11 FSV, FLS/FSG/FSD <Parameter specification table> Setting item Initial value Setting value Setting item Initial value Total mode Stop English Total rate 0m3 Total preset 0m3 Pulse width 50.0msec Burnout (total) Hold Burnout timer 10sec Metric Flow unit m3/h Total unit m Outer diameter 60.00mm Pipe material PVC pipe Wall thickness 4.00mm Lining material Without lining Lining thickness − Kind of fluid Water DO3 output type Not used Viscosity 1.0038×10-6m2/s DO3 output actuation ON when actuated Sensor mount V metod DI1 input type Not used Sensor type FLS_12 DI1 input actuation ON when actuated Transmission voltage 80Vpp Operation mode Standard Damping 5.0sec Communication mode RS-232C Cut off 0.150m /h Baud rate 9600bps Parity Odd Stop bit 1 bit Station No. 1 Output conditions 3 Communication Display System unit Analog output Output conditions Total output 0000 Language Measuring conditions ID No 3 1st line Flow velocity (m/s) 1st line decimal point position ****.*** 2nd line Flow rate (m3/h) 2nd line decimal point position ****.*** Range type Single range Full scale 1 15.000m3/h Full scale 2 0.000m3/h Range HYS. 10.00% Burnout (current) Hold Burnout timer 10sec Output low limit -20% Output high limit 120% Rate limit 0.000m3/h Rate limit timer 0sec DO1 output type (Note 1) Not used DO1 output actuation ON when actuated DO2 output type Not used DO2 output actuation ON when actuated Setting value Note1: When total pulse output has been selected for DO1, DO2 or DO3 specify total pulse value and total pulse width so that conditions 1 and 2 shown below are satisfies. Condition 1 : Condition 2 : Flow span-1*[m3/s] total pulse value*[m3] 1000 [In the case of DO1 and DO2] 1 [In the case of DO3] Flow span-1*[m3/s] 1000 total pulse value*[m3] 2 × total pulse width [ms] * In the case of 2 ranges, perform calculations using either flow span-1 or flow span-2, whichever is greater. Caution on Safety *Before using this product, be sure to read its instruction manual in advance. International Sales Div Sales Group Gate City Ohsaki, East Tower, 11-2, Osaki 1-chome, Shinagawa-ku, Tokyo 141-0032, Japan http://www.fujielectric.com Phone: 81-3-5435-7280, 7281 Fax: 81-3-5435-7425 http://www.fjielectric.com/products/instruments/ Information in this catalog is subject to change without notice. Printed in Japan