http://www.fujisemi.com PG985C6R (600V, 20A) FUJI Diode Super LLD III (For CCM-PFC) Low Loss Super Hight Speed Rectifier Outline Drawings [mm] Features Connection diagram TO-3PF • Lower power loss by higher switching speed and also lower VF than conventional type • Soft recovery and low noise PG985C6 PG985C6 Applications • PFC circuit (current continuous mode) Maximum Ratings and Characteristics Maximum ratings (at Ta=25˚C Unless otherwise specified) Item Symbols Repetitive peak reverse voltage VRRM Isolating voltage Viso Conditions Terminals-to-case, AC.1min Ratings Units 600 V 1500 V 20 * A IO Square wave duty =1/2 Tc =47˚C, 50Hz Non-repetitive surge current ** I FSM Sine wave, 10ms 1shot 50 A Operating junction temperature Tj 150 ˚C Storage temperature Tstg -40 to +150 ˚C Maximum Units Average output current *Out put current of center tap full wave connection. **Rating per element Electrical characteristics (at Ta=25˚C Unless otherwise specified) Item Symbols Conditions Forward voltage*** VF IF = 10A 3 V Reverse current*** IR VR =VRRM 30 µA Reverse recovery time*** trr IF = 0.1A, IR = 0.2A, Irec = 0.05A 0.028 µs Rth(j-c) Junction to case 2 ˚C/W Conditions Ratings Units Recommended torque 0.4 to 0.6 N•m 6.0 g Thermal resistance ***Rating per element Mechanical characteristics Item Mounting torque Approximate mass 1 PG985C6R (600V, 20A) FUJI Diode http://www.fujisemi.com Forward Characteristic (typ.) Reverse Characteristic (typ.) Tj=150°C Tj=125°C 10 IR Reverse Current (µA) Tj=100°C Tj=100°C Tj=25°C 1 Tj=25°C 0.1 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 VR Reverse Voltage (V) VF Forward Voltage (V) Forward Power Dissipation (max.) Reverse Power Dissipation (max.) 35 0.035 DC 360 360 30 0.030 VR I0 25 (W) 0.025 Reverse Power Dissipation Square wave λ=60° 20 Square wave λ=120° Sine wave λ=180° Square wave λ=180° 15 PR IF Forward Current (A) Tj=150°C Tj=125°C 10 5 0.020 α=180° 0.015 0.010 0.005 Per 1element 0 0.000 0 2 4 6 IF(AV) Average Forward Current 8 10 0 (A) 100 200 VR 2 300 400 Reverse Voltage 500 (V) 600 700 PG985C6R (600V, 20A) FUJI Diode http://www.fujisemi.com Junction Capacitance Characteristic (typ.) Current Derating (Io-Tc) (max.) 1000 160 150 140 130 120 110 100 Junction Capacitance (pF) 90 80 70 60 DC Cj Tc Case Temperature (°C) 100 50 Square wave λ=180° Sine wave λ=180° Square wave λ=120° 40 10 30 20 Square wave λ=60° 10 0 0 2 4 6 8 10 12 14 16 18 20 Io Average Output Current 22 24 26 28 1 1 (A) λ:Conduction angle of forward current for each rectifier element Io:Output current of center-tap full wave connection Surge Capability (max.) 100 IFSM Peak Half - Wave Current (A) 1000 10 1 1 10 100 Number of Cycles at 50Hz 3 10 100 VR Reverse Voltage (V) 1000 PG985C6R (600V, 20A) FUJI Diode http://www.fujisemi.com Transient Thermal Impedance (max.) 2 Transient Thermal Impedance (°C/W) 10 1 10 0 10 -1 10 -3 10 -2 10 -1 0 10 10 t Time (sec) 4 1 10 2 10 PG985C6R (600V, 20A) FUJI Diode http://www.fujisemi.com WARNING 1. This Catalog contains the product specifications, characteristics, data, materials, and structures as of March 2010. The contents are subject to change without notice for specification changes or other reasons. When using a product listed in this Catalog, be sure to obtain the latest specifications. 2. A ll applications described in this Catalog exemplify the use of Fuji's products for your reference only. No right or license, either express or implied, under any patent, copyright, trade secret or other intellectual property right owned by Fuji Electric Systems Co., Ltd. is (or shall be deemed) granted. Fuji Electric Systems Co., Ltd. makes no representation or warranty, whether express or implied, relating to the infringement or alleged infringement of other's intellectual property rights which may arise from the use of the applications described herein. 3. A lthough Fuji Electric Systems Co., Ltd. is enhancing product quality and reliability, a small percentage of semiconductor products may become faulty. When using Fuji Electric semiconductor products in your equipment, you are requested to take adequate safety measures to prevent the equipment from causing a physical injury, fire, or other problem if any of the products become faulty. It is recommended to make your design fail-safe, flame retardant, and free of malfunction. 4. T he products introduced in this Catalog are intended for use in the following electronic and electrical equipment which has normal reliability requirements. • Computers • OA equipment • Communications equipment (terminal devices) • Measurement equipment • Machine tools • Audiovisual equipment • Electrical home appliances • Personal equipment • Industrial robots etc. 5. If you need to use a product in this Catalog for equipment requiring higher reliability than normal, such as for the equipment listed below, it is imperative to contact Fuji Electric Systems Co., Ltd. to obtain prior approval. When using these products for such equipment, take adequate measures such as a backup system to prevent the equipment from malfunctioning even if a Fuji's product incorporated in the equipment becomes faulty. • Transportation equipment (mounted on cars and ships) • Trunk communications equipment • Traffic-signal control equipment • Gas leakage detectors with an auto-shut-off feature • Emergency equipment for responding to disasters and anti-burglary devices • Safety devices • Medical equipment 6. Do not use products in this Catalog for the equipment requiring strict reliability such as the following and equivalents to strategic equipment (without limitation). • Space equipment • Aeronautic equipment • Nuclear control equipment • Submarine repeater equipment 7. Copyright ©1996-2008 by Fuji Electric Systems Co., Ltd. All rights reserved. No part of this Catalog may be reproduced in any form or by any means without the express permission of Fuji Electric Systems Co., Ltd. 8. If you have any question about any portion in this Catalog, ask Fuji Electric Systems Co., Ltd. or its sales agents before using the product. Neither Fuji Electric Systems Co., Ltd. nor its agents shall be liable for any injury caused by any use of the products not in accordance with instructions set forth herein. 5