TIMING PULSE DELAY GENERATOR CONTROL C10149 OVERVIEW The C10149 is a pulse delay generator capable of generating a 3-channel pulse output. The C10149 is controled by a PC (personal computer) for adjusting each timing of devices in a measurement system that uses an ICCD camera, highspeed gated image intensifier unit or photomultiplier tube. Measurement can be made while eliminating excitation light and/or synchronizing the lighting timing with a fast moving object to be observed. FEATURES APPLICATIONS ●Independent control of 3-channels pulse output ●Burst pulse output (1 channel only) ●PC control ●Operates on USB bus power ●Compact and lightweight ●Shutter timing control of ICCD camera and gated image intensifier unit • Timing control for synchronizing image intensifier gating with laser or strobe light source (lighting) • Timing control for synchronizing image intensifier gating with engine combustion or fast moving object (observation target) ●Timing control for gated photomultiplier tube • LIDAR, fluorescence lifetime measurement, etc. ●Timing control of measurement equipment and factory automation devices CONNECTION DIAGRAM WITH ICCD CAMERA AC ADAPTER A10059-01 ICCD CAMERA C10054 SERIES VIDEO OUTPUT C-MOUNT LENS CAMERA CABLE A5963 SERIES REMOTE CONTROLLER AC CABLE AC100 V to 240 V REMOTE CONTROLLER AC CABLE AC100 V to 240 V AC ADAPTER BNC CABLE (SHUTTER SIGNAL) PULSE OUTPUT A PULSE DELAY GENERATOR C10149 C10149 CONTROL SOFTWARE (CD-ROM) PULSE OUTPUT C PULSE OUTPUT B USB CABLE (2 m) TRIGGER OUTPUT TRIGGER INPUT PC C10149 TAPPC0159EA SPECIFICATIONS ●GENERAL Trigger Output Parameter Mode Number of Input Channel Input Terminal Number of Trigger Channel Number of Pulse Channel Output Terminal Description / Value Internal — — External 1 BNC-R 1 3 BNC-R ●TRIGGER INPUT (EXTERNAL TRIGGER) Parameter Signal Level Logic Level Minimum Pulse Width Impedance Repetition Rate Description / Value TTL Positive / Negative (Selectable) 10 ns 1 kΩ 0.1 Hz to 200 kHz ●TRIGGER OUTPUT Parameter Output Level Logic Level Internal Trigger Mode External Trigger Mode Delay Time of External Trigger Impedance Pulse Width Description / Value 4.5 V *1 Positive / Negative (Selectable) 100 ns External Trigger Pulse Width 60 ns ± 2 ns 10 Ω ●PULSE OUTPUT (A, B, C) Parameter Signal Level Logic Level Repetition Rate *2 Pulse Width Delay Time Burst Operation (Only Output C) Delay Time *4 Pulse Jitter Range Resolution Range Resolution Pulse Width Interval Time of Pulse / Pulse Number of Pulse Output A and B Output C At Internal Trigger Mode At External Trigger Mode Rise Time / Fall Time *6 Description / Value 4.5 V *1 Positive / Negative (Selectable) 0.05 Hz to 200 kHz 5 ns to 20.45 s *3 10 ns *3 0 ns to 20.45 s *3 10 ns *3 5 ns to 20.45 s *3 200 ns to 20.45 s *3 1 to 255 120 ns ± 4 ns 130 ns ± 4 ns 1 ns Max. 2 ns Max. *5 5 ns Max. ●RATING Parameter USB *7 Power Supply AC Adapter (supplied) Power Consumption (with no load) Weight Dimensions (W × H × D) Operating Ambient Temperature Operating and Storage Humidity Description / Value 5V AC 100 V to AC 240 V 1.8 W 300 g 100 mm × 36 mm × 100 mm 0 °C to 40 °C 70 % Max. (no condensation) ●EQUIPED CONTROL SOFTWARE Parameter Applicable PC Applicable OS Interface Value IBM PC compatible computers *9 Windows® Vista, 7 USB NOTE *1: When 50 Ω load is connected. Output is 5 V when no load is connected. *2: When internal time base is used. *3: Resolution decreases if set to 10 ms or more. *4: Delay time from input trigger pulse. See timing chart (next page). *5: Jitter is 10 ns or less when frequency is 1 kHz or more. *6: From 10 to 90 % of peak amplitude (with 50 Ω load) *7: Use an AC adapter if power is insufficient due to equipment load to be connected. *8: Software is used to select logic level and to set pulse width and delay time, etc. *9: PC with a USB port whose operation is guaranteed by the PC manufacturer SHUTTER TIMING CHART (EXTERNAL TRIGGER MODE) 10 ns MIN. TRIGGER INPUT PULSE (TRIG. IN TERMINAL) DELAY TIME OF EXTERNAL TRIGGER 60 ns ± 2 ns TRIGGER WIDTH (100 ns at INTERNAL TRIGGER) TRIGGER OUTPUT PULSE (TRIG. OUT TERMINAL) OUTPUT A· B DELAY TIME 120 ns ± 4 ns * OUTPUT A * : The output pule widths and delay time can be set individually and optionally. * OUTPUT B OUTPUT C DELAY TIME 130 ns ± 4 ns * OUTPUT C BURST OPERATION (ONLY OUTPUT C) TAPPC0160EA DIMENSIONAL OUTLINES (Unit: mm) OUTPUT INDICATOR LED OUTPUT A MONITOR INDICATOR LED OUTPUT B 100 100 C10149 DIGITAL PULSE GENERATOR A B C USB 36 TRIG. OUT TRIGGER OUTPUT OUTPUT C FRONT VIEW SOFTWARE SCREEN DC12V=0.2A 3.5 TRIGGER INPUT USB CONNECTOR OUTPUT MONITOR TRIG. IN TOP VIEW AC ADAPTER INPUT TAPPA0090EB SIDE VIEW REAR VIEW APPLICATIONS ●High-speed imaging using high-speed gated I.I. unit XENON FLASH LAMP CCD CAMERA WITH FIBER OPTIC PLATE C9018 ND FILTER VIDEO SIGNAL SHUTTER SIGNAL (CCD) OBJECTIVE LENS WITH C-MOUNT AC ADAPTER A10059-01 GATE I.I. UNIT C9546 SERIES TRIGGER SIGNAL SHUTTER SIGNAL (I.I.) C10149 FLASH TRIGGER SIGNAL PULSE DELAY GENERATOR C10149 CONTROL SIGNAL (USB) CONTROL SIGNAL (USB) TAPPC0161EB ●Fluorescence measurement using gated PMT module FLASH TRIGGER SIGNAL CONTROL SIGNAL (USB) C10149 GATE SIGNAL PULSE LIGHT SOURCE SAMPLE / HOLD SIGNAL PULSE DELAY GENERATOR C10149 FLUORESCENCE PMT MODULE WITH GATE FUNCTION H11526 SERIES H11706 SERIES COMMERCIAL ADC BOARD AMPLIFIER UNIT PC TAPPC0162EB ●Photon counting measurement using PMT and its accessories FLASH TRIGGER SIGNAL PHOTON PULSE COUNTING HEAD LIGHT SOURCE CONTROL SIGNAL (USB) C10149 PULSE DELAY GENERATOR C10149 COUNTER START SIGNAL COUNTING UNIT C8855-01 USB or COUNTING BOARD M9003-01 PMT FOR FLUORES- PHOTON COUNTING CENCE PHOTON COUNTING UNIT C9744 PCI PC TAPPC0163EB Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2014 Hamamatsu Photonics K.K. HAMAMATSU PHOTONICS K.K. www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Electron Tube Division 314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: [email protected] Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: [email protected] France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: [email protected] United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44)1707-294888, Fax: (44)1707-325777 E-mail: [email protected] North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 SE-164 40 Kista, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: [email protected] Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 20020 Arese (Milano), Italy, Telephone: (39)02-93581733, Fax: (39)02-93581741 E-mail: [email protected] TAPP1067E03 China: Hamamatsu Photonics (China) Co., Ltd.: B1201 Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86)10-6586-6006, Fax: (86)10-6586-2866 E-mail: [email protected] JUN. 2014 IP