FGR15N40A Strobe Flash N-Channel Logic Level IGBT Features VCE(SAT) = 4.4V at IC=150A tfl = 1.1µs, td(OFF)I = 0.46µs 2kV ESD Protected High Peak Current Density SuperSOT - 8 package, small General Description This N-Channel IGBT is a MOS gated, logic level device which has been especially tailored for camera flash applications where board space is a premium. These devices have been designed to offer exceptional power dissipation in a very small footprint for applications where bigger, more expensive packages are impractical. The gate is ESD protected with a zener diode. footprint, low profile (1mm thick) Applications Camera Strobe Internal Diagram C C C C G Pin 1 E E E SSOT-8 Ssot8 ©2005 Fairchild Semiconductor Corporation FGR15N40A Rev. A1 1 www.fairchildsemi.com FGR15N40A Strobe Flash N-Channel Logic Level IGBT July 2005 Symbol BVCES Parameter Collector to Emitter Breakdown Voltage IC Collector Current Continuous(DC) ICP Collector Current Pulsed(100µs) Ratings 400 Units V 8 A 150 A VGES Gate to Emitter Voltage Continuous(DC) ±6 V VGEP Gate to Emitter Voltage Pulsed ±8 V PD Power Dissipation Total TC = 25°C 1.25 W TJ Operating Junction Temperature Range -40 to 150 °C TSTG Storage Junction Temperature Range -40 to 150 °C ESD Electrostatic Discharge Voltage at 100pF, 1500Ω 2 kV Package Marking and Ordering Information Device Marking 15N40A Device FGR15N40A Package SuperSOT - 8 Tape Width 12mm Quantity 3000 Electrical Characteristics TA = 25°C unless otherwise noted Symbol Parameter Test Conditions Min Typ Max Units Off State Characteristics BVCES Collector to Emitter Breakdown Voltage IC = 1mA, VGE = 0V 400 - - V BVGES Gate-Emitter Breakdown Voltage IGES = ± 1mA ±8 - - V ICES Collector to Emitter Leakage Current VCE = 400V TC = +25oC - - 10 µA TC = +125oC - - 250 µA - - ±10 µA - 4.4 6.0 V IGES Gate-Emitter Leakage Current VGE = ± 8V On State Characteristics VCE(SAT) Collector to Emitter Saturation Voltage IC = 150A, VGE = 4.0V (NOTE 1) Dynamic Characteristics QG(ON) Gate Charge IC = 150A, VCE = 300V, VGE = 8V - 41 - nC VGEPL Gate to Emitter Plateau Voltage IC = 150A, VCE = 300V - 3.1 - V VGE(TH) Gate to Emitter Threshold Voltage IC = 1.0mA,V CE = VGE 0.4 0.61 0.75 V Input Capacitance VCE = 10V, VGE = 0V, f = 1MHz - 1800 - pF CIES Switching Characteristics tON Turn-On Time VCE = 300V, IC = 150A, - 0.91 - µs td(ON)I Current Turn-On Delay Time VGE = 4V, RL = 2Ω, - 0.18 - µs trI Current Rise Time RG = 51Ω, TJ = 25°C - 0.73 - µs tOFF Turn-Off Time - 1.56 - µs td(OFF)I Current Turn-Off Delay Time - 0.46 - µs tfI Current Fall Time - 1.1 - µs - 80 - °C/W Thermal Characteristics RθJA Thermal Resistance Junction-Case SuperSOT - 8 (NOTE 2) Notes: 1. Pulse Duration = 100µsec 2. Mounted on a 1 inch2 1oz copper pad 2 FGR15N40A Rev. A1 www.fairchildsemi.com FGR15N40A Strobe Flash N-Channel Logic Level IGBT Device Maximum Ratings TA = 25°C unless otherwise noted ICE, ICOLLECTOR TO EMITTER CURRENT (A) ICE, ICOLLECTOR TO EMITTER CURRENT (A) 160 TJ = -40°C PULSE DURATION = 100µs 140 120 100 80 Waveforms in descending order 60 VGE = 6.0V 40 VGE = 5.0V VGE = 4.0V 20 VGE = 3.5V 0 1 1.5 2 2.5 3 3.5 4 160 TJ = 25°C PULSE DURATION = 100µs 140 120 100 80 Waveforms in descending order 60 VGE = 6.0V 40 VGE = 5.0V VGE = 4.0V 20 VGE = 3.5V 0 1 4.5 1.5 VCE, COLLECTOR TO EMITTER VOLTAGE (V) ICE, ICOLLECTOR TO EMITTER CURRENT (A) ICE, ICOLLECTOR TO EMITTER CURRENT (A) TJ = 70°C PULSE DURATION = 100µs 120 100 80 Waveforms in descending order VGE = 6.0V 40 VGE = 5.0V VGE = 4.0V 20 VGE = 3.5V 3.5 4 4.5 5 160 TJ = 125°C PULSE DURATION = 100µs 140 120 100 80 Waveforms in descending order 60 VGE = 6.0V 40 VGE = 5.0V VGE = 4.0V 20 VGE = 3.5V 0 0 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 1 6 1.5 VCE, COLLECTOR TO EMITTER VOLTAGE (V) VCE, COLLECTOR TO EMITTER VOLTAGE (V) VGE = 4V PULSE DURATION = 100µs ICE = 150A 5 ICE = 120A 4 ICE = 90A 3 ICE = 60A 2 -40 -20 0 20 40 60 80 100 120 140 3 3.5 4 4.5 5 5.5 6 7 VGE = 4.5V PULSE DURATION = 100µs 6 ICE = 150A 5 ICE = 120A 4 ICE = 90A 3 ICE = 60A 2 -40 TC, CASE TEMPERATURE (°C) -20 0 20 40 60 80 100 120 140 TC, CASE TEMPERATURE (°C) Figure 5. Collector to Emitter Saturation Voltage vs Case Temperature Figure 6. Collector to Emitter Saturation Voltage vs Case Temperature 3 FGR15N40A Rev. A1 2.5 Figure 4. Collector to Emitter On-State Voltage vs Collector Current 7 6 2 VCE, COLLECTOR TO EMITTER VOLTAGE (V) Figure 3. Collector to Emitter On-State Voltage vs Collector Current VCE, COLLECTOR TO EMITTER VOLTAGE (V) 3 Figure 2. Collector to Emitter On-State Voltage vs Collector Current 160 60 2.5 VCE, COLLECTOR TO EMITTER VOLTAGE (V) Figure 1. Collector to Emitter On-State Voltage vs Collector Current 140 2 www.fairchildsemi.com FGR15N40A Strobe Flash N-Channel Logic Level IGBT Typical Characteristics DUTY CYCLE < 0.5% PULSE DURATION = 100µs TJ = -40oC VCE, COLLECTOR TO EMITTER VOLTAGE (V) VCE, COLLECTOR TO EMITTER VOLTAGE (V) 7 6 ICE = 150A ICE = 120A 5 ICE = 90A ICE = 60A 4 3 2 0 0.5 1 1.5 2 2.5 3 3.5 4 7 DUTY CYCLE < 0.5% PULSE DURATION = 100µs TJ = 25oC 6 ICE = 150A ICE = 120A ICE = 90A 5 ICE = 60A 4 3 2 0 4.5 1 VGE, GATE TO EMITTER VOLTAGE (V) VCE, COLLECTOR TO EMITTER VOLTAGE (V) VCE, COLLECTOR TO EMITTER VOLTAGE (V) ICE = 150A 6 ICE = 120A ICE = 90A ICE = 60A 5 4 3 2 5 6 9 DUTY CYCLE < 0.5% PULSE DURATION = 100µs TJ = 125o C 8 ICE = 150A 7 ICE = 120A ICE = 90A 6 ICE = 60A 5 4 3 2 0 1 2 3 4 5 6 7 0 VGE, GATE TO EMITTER VOLTAGE (V) 0.75 1 2 3 4 5 7 Figure 10. Collector to Emitter On-State Voltage vs Gate to Emitter Voltage 5000 ICE = 1mA VCE = VGE FREQUENCY = 1MHz 0.7 CIES C, CAPACITANCE (pF) 1000 0.65 0.6 0.55 0.5 0.45 0.4 -40 6 VGE, GATE TO EMITTER VOLTAGE (V) Figure 9. Collector to Emitter On-State Voltage vs Gate to Emitter Voltage VGE(TH), THRESHOLD VOLTAGE (V) 4 Figure 8. Collector to Emitter On-State Voltage vs Gate to Emitter Voltage DUTY CYCLE < 0.5% PULSE DURATION = 100µs TJ = 70 oC 7 3 VGE, GATE TO EMITTER VOLTAGE (V) Figure 7. Collector to Emitter On-State Voltage vs Gate to Emitter Voltage 8 2 COES 100 CRES 10 4 -20 0 20 40 60 80 100 120 140 0.1 TC, CASE TEMPERATURE (°C) Figure 11. Gate to Emitter Threshold Voltage vs Case Temperature 10 100 Figure 12. Capacitance vs Collector to Emitter Voltage 4 FGR15N40A Rev. A1 1 VCE, COLLECTOR TO EMITTER VOLTAGE (V) www.fairchildsemi.com FGR15N40A Strobe Flash N-Channel Logic Level IGBT Typical Characteristics (Continued) 6 3 VCC = 300V, VGE = 4V, RGE = 51Ω, TJ = 25oC VCC = 300V, ICE = 150A, VGE = 4V, TJ = 25oC SWITCHING TIME (µs) SWITCHING TIME (µs) toff tfall 1 ton toff tfall 1 ton trise trise 0.1 0.5 0 25 50 75 100 125 150 0 50 100 Figure 13. Switching Time vs Collector Current 250 300 Figure 14. Switching Time vs Gate Resistance 160 IG(REF) = 1mA, VCC = 300V, RL = 2Ω, TJ = 25oC ICP, COLLECTOR PEAK CURRENT (A) VGE, GATE TO EMITTER VOLTAGE (V) 200 RG, GATE RESISTANCE (Ω) ICE, COLLECTOR TO EMITTER CURRENT (A) 8 150 7 6 5 4 3 2 1 0 TJ = 25°C PULSE DURATION = 100µs 140 120 100 80 60 40 20 0 0 5 10 15 20 25 30 35 40 45 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 VGE, GATE TO EMITTER VOLTAGE (V) QG, GATE CHARGE (nC) Figure 15. Gate Charge Figure 16. Collector Current Limit vs Gate to Emitter Voltage ZθJA , NORMALIZED THERMAL RESPONSE 2.0 1.0 0.1 DUTY CYCLE - DESCENDING ORDER 0.5 0.2 0.1 0.05 0.02 0.01 t1 PD 0.01 t2 DUTY FACTOR, D = t1 / t2 PEAK TJ = (PD X ZθJA X R θJA) + TC SINGLE PULSE 0.001 10-4 10-3 10-2 10-1 100 101 t1 , RECTANGULAR PULSE DURATION (s) Figure 17. Normalized Transient Thermal Impedance, Junction to Case 5 FGR15N40A Rev. A1 www.fairchildsemi.com FGR15N40A Strobe Flash N-Channel Logic Level IGBT Typical Characteristics (Continued) The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ ActiveArray™ Bottomless™ CoolFET™ CROSSVOLT™ DOME™ EcoSPARK™ E2CMOS™ EnSigna™ FACT™ FACT Quiet Series™ FAST® FASTr™ FPS™ FRFET™ GlobalOptoisolator™ GTO™ HiSeC™ I2C™ i-Lo™ Across the board. Around the world.™ The Power Franchise® Programmable Active Droop™ ImpliedDisconnect™ IntelliMAX™ ISOPLANAR™ LittleFET™ MICROCOUPLER™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ OCX™ OCXPro™ OPTOLOGIC® OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerEdge™ PowerSaver™ PowerTrench® QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ µSerDes™ SILENT SWITCHER® SMART START™ SPM™ Stealth™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic® TINYOPTO™ TruTranslation™ UHC™ UltraFET ® UniFET™ VCX™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I15 6 FGR15N40A Rev. A1 www.fairchildsemi.com FGR15N40A Strobe Flash N-Channel Logic Level IGBT TRADEMARKS