SUT041C Dual NPN Bipolar transistor Descriptions • General purpose amplifier • Recommended for LED Drive Application Features • Thermally Enhanced Power PKG • Low saturation: VCE(sat)= 0.5V Max • 2 NPN chips in TESOP-8M Package TESOP-8M Ordering Information Type NO. Marking Package Code SUT041C T041□ TESOP-8M □ : Year & Week Code Absolute maximum ratings(TR1, TR2) Characteristic (Ta=25°C) Symbol Ratings Unit Collector-Base voltage VCBO 45 V Collector-Emitter voltage VCEO 40 V Emitter-Base voltage VEBO 5 V IC 1 A(DC) ICP* 2 A(Pulse) 0.5 W/TOTAL Collector current PC(Ta=25°C) ** Collector power dissipation 0.4 W/ELEMENT PC(Tc=25°C) 4 W/TOTAL Junction temperature TJ 150 °C Storage temperature Tstg -55~150 °C * : Single pulse, tp= 300 ㎲ ** : Each terminal mounted on a recommended solder land Electrical Characteristics(TR1, TR2) Characteristic Symbol Test Condition Min. Typ. Max. Unit Collector-Base breakdown voltage BVCBO IC=100μA, IE=0 45 - - V Collector-Emitter breakdown voltage BVCEO IC=1mA, IB=0 40 - - V Emitter-Base breakdown voltage BVEBO IE=10μA, IC=0 5 - - V Collector cut-off current ICBO VCB=45V, IE=0 - - 0.1 μA Emitter cut-off current IEBO VEB=5V, IC=0 - - 0.1 μA DC current gain hFE 160 - 320 - IC=500mA, IB=50mA - - 0.5 V VCE=5V, IC=10mA - 150 - MHz VCB=10V, IE=0, f=1MHz - 8 - pF Collector-Emitter saturation voltage Transition frequency Collector output capacitance 1) VCE(sat) fT Cob VCE=1V, IC=100mA Note 1) hFE Rank : 160~320 only KSD-T7L001-000 1 SUT041C Electrical Characteristic Curves(TR1, TR2) Fig. 2 IC - VBE Fig. 3 VCE(sat) - IC Fig. 4 IC - VCE Fig. 5 IC - VCE Fig. 6 hFE - IC ㎽ Fig. 1 PC - Ta KSD-T7L001-000 2 SUT041C Fig. 7 hFE - IC Fig. 8 hFE - IC Fig. 9 Cob - VCB Fig. 10 fT - IC ℃ Co Fig. 11 Safe operating Area * * * * ) ℃ KSD-T7L001-000 3 SUT041C Outline Dimension SYMBOL A b C D E E1 E2 E3 E4 H H1 L L1 MINIMUM 0.740 0.250 0.077 2.900 3.050 0.100 1.300 1.660 2.050 0.750 0.200 SYMBOL NOMINAL 0.770 0.300 0.127 3.000 3.200 0.300 1.500 1.860 1.600 TYP 2.250 0.950 0.650 0.300 NOTE MAXIMUM 0.800 0.400 0.177 3.100 3.350 0.500 1.700 2.060 2.450 1.150 0.400 1.450 0.650 0.400 0.400 ※Recommend PCB solder land [Unit: mm] 2.060 0.400 0.500 0.360 0.160 0.375 1.150 0.650 2.450 KSD-T7L001-000 4 SUT041C The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T7L001-000 5