STD13005IS NPN Silicon Power Transistor SWITCHING REGULATOR APPLICATIONS Features • High speed switching • VCEO(sus)=400V • Suitable for Switching Regulator and Motor Control PIN Connection C B Ordering Information Type NO. Marking Package Code STD13005IS STD13005 I-PAK BCE E I-PAK Marking Diagram Column 1, 2: Device Code STD 13005 ☆YWW Column 3 : Production Information - ☆ : hFE rank - YWW : Year& Weekly Code Absolute maximum ratings Characteristic (Tc=25℃) Symbol Ratings Unit Collector-Base voltage VCBO 700 V Collector-Emitter voltage VCEO 400 V Emitter-base voltage VEBO 9 V Collector current (DC) IC 4 A Collector current (Pulse) ICM 8 A Base current (DC) IB 2 A Base current (Pulse) IBM 4 A Total Power dissipation (Tc=25℃) PD 30 W Junction temperature Tj 150 °C Storage temperature Tstg -55~150 °C Characteristic Thermal resistance Symbol Typ. Max Junction-case Rth(J-C) - 4.16 Junction-ambient Rth(J-a) - 62.5 Preliminary Unit ℃/W 1 STD13005IS Electrical Characteristics (Tc=25℃) Characteristic Symbol Collector-Emitter sustaining voltage VCE(sus) Test Condition IC=10mA, IB=0 Min. Typ. Max. Unit 400 - - V Collector cut-off current ICEV VCEV=Rated Value VBE(off)=1.5V - - 1 mA Emitter cut-off current IEBO VEB=9V, IC=0 - - 1 mA DC Current gain hFE* 15 - 40 IC=2A, VCE=5V 8 - 40 IC=1A, IB=0.2A - - 0.5 IC=2A, IB=0.5A - - 0.6 IC=4A, IB=1A - - 1 IC=1A, IB=0.2A - - 1.2 IC=2A, IB=0.5A - - 1.6 VCB=10V, IC=0.5A, f=1MHz - 4 - MHz VCB=10V, IE=0, f=0.1MHz - 65 - pF - 0.8 - - 4 - - 0.9 - Collector-Emitter saturation voltage Base-Emitter saturation voltage VCE(sat)* VBE(sat)* Transition frequency fT Output capacitance Cob Turn on Time tON Storage Time tSTG Fall Time ※ IC=1A, VCE=5V VCC=125V,IC=2A, RL=62.5Ω IB1=-IB2=0.4A tF V V ㎲ * Pulse test: PW≤300 ㎲, Duty cycle≤2% Pulse ※ hFE rank / A : 15~30, B : 25~40 Preliminary 2 STD13005IS Electrical Characteristic Curves Fig. 2 VBE(sat) , VCE(sat) - IC Fig. 1 PD - TC Fig. 3 hFE-IC Fig. 4 Turn off time Fig. 5 Turn on time Fig. 6 Capacitance Preliminary 3 STD13005IS Outline Dimensions Preliminary 4 STD13005IS The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. Preliminary 5