PQ-100 100W Quad Output Switching Power Supply series Features : Universal AC input / Full range Protections: Short circuit / Overload / Over voltage Cooling by free air convection With power good signal output(Optional) 100% full load burn-in test Fixed switching frequency at 45KHz 2 years warranty SPECIFICATION MODEL OUTPUT INPUT PQ-100B CH1 CH2 CH3 CH4 CH1 CH2 CH3 CH4 DC VOLTAGE 5V 12V -5V -12V 5V 15V -5V -15V RATED CURRENT 10A 3.5A 0.5A 0.5A 8A 3.5A 0.5A 0.5A CURRENT RANGE 2 ~ 10A 0.5 ~ 4.5A 0 ~ 1A 0 ~ 1A 2 ~ 8A 0.5 ~ 4A 0 ~ 1A 0 ~ 1A RATED POWER 100.5W 150mVp-p 80mVp-p 150mVp-p CH1:4.75 ~ 5.5V VOLTAGE TOLERANCE Note.3 3.0% 12% 80mVp-p CH1:4.75 ~ 5.5V 2.0% 6.0% 6.0% 6.0% 6.0% 6.0% 5.0% 1.0% 1.0% 1.0% 3.0% 1.0% 1.0% LOAD REGULATION 2.0% 5.0% 1.0% 1.0% 1.0% 5.0% 1.0% 1.0% SETUP, RISE TIME 1200ms, 50ms at full load HOLD UP TIME (Typ.) 80ms at full load VOLTAGE RANGE 100 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY(Typ.) 72% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 3A/115VAC FUNCTION POWER GOOD WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE 141 ~370VDC (90 ~ 100VAC 90% load max.) 74% 1.5A/230VAC COLD START 50A <1mA /240VAC 105% ~ 135% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed CH1: 5.75 ~ 6.75VDC Protection type : Hiccup mode, recovers automatically after fault condition is removed 1ms -10 ~ +50 ,60 with cooling fan(Refer to output load derating curve) 20 ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY MTBF NOTE 120mVp-p 1.0% OVER VOLTAGE OTHERS 80mVp-p LINE REGULATION PROTECTION (Note 4) 250mVp-p VOLTAGE ADJ. RANGE OVERLOAD EMC 102.5W RIPPLE & NOISE (max.) Note.2 80mVp-p LEAKAGE CURRENT SAFETY & PQ-100C OUTPUT NUMBER DIMENSION PACKING / 70% RH Compliance to EN61000-4-2,3,4,5,6,11; ENV50204, light industry level, criteria A 258.6K hrs min. MIL-HDBK-217F (25 177.8*107.95*46mm (L*W*H) 0.56Kg; 24pcs/14.5Kg/1.19CUFT ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com) File Name:PQ-100-SPEC 2010-10-18 PQ-100 100W Quad Output Switching Power Supply series Features : Universal AC input / Full range Protections:Short circuit/Over load/Over voltage Cooling by free air convection With power good signal output(Optional) 100% full load burn-in test Fixed switching frequency at 45KHz 2 years warranty SPECIFICATION MODEL OUTPUT INPUT PQ-100D CH1 CH2 CH3 CH4 CH1 CH2 CH3 CH4 DC VOLTAGE 5V 12V 24V -12V 5V 12V 15V 24V RATED CURRENT 5A 2A 2A 0.5A 8A 3A 0.6A 0.6A CURRENT RANGE 2 ~ 5A 0.5 ~ 4.5A 0.4 ~ 2A 0 ~ 1A 2 ~ 8A 0.5 ~ 3A 0 ~ 1A 0 ~ 1A RATED POWER 103W 120mVp-p 180mVp-p 120mVp-p 120mVp-p 150mVp-p 120mVp-p VOLTAGE ADJ. RANGE CH1:4.75 ~ 5.5V VOLTAGE TOLERANCE Note.3 2.0% 6.0% 80mVp-p CH1:4.75 ~ 5.5V 2.0% 6.0% 10% 6.0% 6.0% 6.0% LINE REGULATION 1.0% 3.0% 1.0% 1.0% 1.0% 3.0% 1.0% 1.0% LOAD REGULATION 1.0% 5.0% 5.0% 1.0% 1.0% 5.0% 1.0% 1.0% SETUP, RISE TIME 1200ms, 50ms at full load HOLD TIME (Typ.) 80ms at full load VOLTAGE RANGE 100 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 77% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 3A/115VAC OVER LOAD PROTECTION OVER VOLTAGE FUNCTION POWER GOOD WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMC EMI CONDUCTION & RADIATION (Note 4) HARMONIC CURRENT 141 ~370VDC (90 ~ 100VAC 90% load max.) 74% 1.5A/230VAC COLD START 50A <1mA /240VAC 105% ~ 135% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed CH1: 5.75 ~ 6.75VDC Protection type : Hiccup mode, recovers automatically after fault condition is removed 1ms -10 ~ +50 ,60 with cooling fan(Refer to output load derating curve) 20 ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 Compliance to EN55022 (CISPR22) Class B / 70% RH Compliance to EN61000-3-2,-3 EMS IMMUNITY Compliance to EN61000-4-2,3,4,5,6,11; ENV50204, light industry level, criteria A MTBF 258.6K hrs min. MIL-HDBK-217F (25 177.8*107.95*46mm (L*W*H) 0.56Kg; 24pcs/14.5Kg/1.19CUFT DIMENSION PACKING NOTE 99.4W RIPPLE & NOISE (max.) Note.2 80mVp-p LEAKAGE CURRENT OTHERS PQ-100E OUTPUT NUMBER ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com) File Name:PQ-100-SPEC 2010-10-18 PQ-100 100W Quad Output Switching Power Supply Mechanical Specification series Unit:mm 177.8 165.1 6.35 6.35 AC FUSE T4A/250V FS1 CN1 95.25 13 12 11 10 9 8 7 6 5 4 3 2 1 107.95 5 4 3 2 1 AC Input Connector (CN1) : Molex 5273-05 or equivalent Assignment FG No Pin AC/N AC/L Pin No. 1 2,4 3 5 CN2 +5V ADJ Mating Housing Terminal Molex 5195 or equivalent Molex 5194 or equivalent DC Output Connector (CN2) : Molex 5273-06,07 or equivalent Pin No. Mating Housing Terminal Assignment 1,2,3 V1 4,5,6,7 COM 8,9 V2 Molex 5194 Molex 5195 Power Good(Option) or equivalent or equivalent 10 V3 11 No Pin 12 V4 13 3.96 3 max. 46 4- fosc : 45KHz Block Diagram RECTIFIERS & FILTER EMI FILTER I/P RECTIFIERS & FILTER RECTIFIERS & FILTER RECTIFIERS & FILTER RECTIFIERS & FILTER POWER SWITCHING FG O.L.P. V4 REGULATOR V3 V2 V1 COM DETECTION CIRCUIT PWM CONTROL Derating Curve REGULATOR O.V.P. Static Characteristics (B) Ta=25 OUTPUT VOLTAGE (V) 100 80 Natural convection cooling LOAD (%) 60 40 20 -10 -10 0 0 10 20 30 40 50 AMBIENT TEMPERATURE ( ) 60 (HORIZONTAL) 300 13 5.2 12 5.0 11 4.8 200 10 4.6 150 9 4.4 8 4.2 7 4.0 12V 250 5V +12V 100 50 -12V 5V 90 100 110 120 140 160 180 200 220 240 25 OUTPUT RIPPLE (mVp-p) 17CFM forced air cooling(20cm) 260 INPUT VOLTAGE (V) 60Hz File Name:PQ-100-SPEC 2010-10-18