Europe: +49 / 7733 9487 0 | Email: [email protected] USA: +1 / 508 539 0002 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] Conditions Coil datas at 20 °C Coil resistance Coil voltage Rated power Thermal resistance Pull-In voltage Drop-Out voltage = Contact-material Contact rating Switching voltage Switching current 3305190171 Item: SIL05-1B90-71D Min Typ Max Unit Min Typ Max Unit operating temperature + self heating Conditions Contact data 90 Item No.: Rhodium !" #$ $" "% dependent to AT-value & DC or Peak AC Carry current Contact resistance static Insulation resistance Breakdown voltage Operate time, incl. bounce Release time Capacity Special Product Data Insulation resistance Coil/Contact Insulation voltage Coil/Contact Housing material Environmental data Shock Vibration Ambient temperature Storage temperature Soldering temperature Cleaning " ' ( dependent to AT-value " ' ( dependent to AT-value ) * + ,$ - . "/ + $/ Start Value RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz 0 * * 1 Conditions Min Typ Max RH <45%, 100 V test voltage according to IEC 255-5 Unit 0 ( mineral-filled epoxy Conditions Min Typ Max 1/2 sine wave duration 11ms from 10 - 2000 Hz 4 4 max. 5 sec 5 Unit 2 2 3 3 3 fully sealed Modifications in the sense of technical progress are reserved Designed at: 11.12.06 Designed by: KMUELLER Approval at: Last Change at: 14.12.06 Last Change by: JHEYDER Approval at: 14.12.06 Approval by: Approval by: JHEYDER Version: 01