Product Specification PE4135 High Linearity UltraCMOS™ Quad MOSFET Mixer Product Description The PE4135 is a high linearity passive Quad MOSFET Mixer for GSM800 & Cellular Base Station Receivers, exhibiting high dynamic range performance over a broad LO drive range of up to 20 dBm. This mixer integrates passive matching networks to provide single-ended interfaces for the RF and LO ports, eliminating the need for external RF baluns or matching networks. The PE4135 is optimized for frequency downconversion using low-side LO injection for GSM800 & Cellular Base Station application, and is also suitable for up-conversion applications. The PE4135 is manufactured on Peregrine’s UltraCMOS™ process, a patented variation of silicon-on-insulator (SOI) technology on a sapphire substrate, offering the performance of GaAs with the economy and integration of conventional CMOS. Features • Integrated, single-ended RF & LO interfaces • High linearity: Typical IIP3 at 32dBm 820 - 920 MHz (+17 dBm LO) • Low conversion loss: 6.8 dB (+17 dBm LO) • High isolation: Typical LO-IF at 42 dB, LO-RF at 32 dB • Small 6-lead 3x3 mm DFN package Figure 2. Package Type Figure 1. Functional Diagram 6-lead DFN LO 180o Two-Way Power Divider RF 180o Two-Way Power Divider IF Table 1. Electrical Specifications @ +25 °C Parameter1 Frequency Range: LO RF IF2 Minimum Typical Maximum Units 750 820 -- --70 850 920 -- MHz MHz MHz 6.8 7.3 dB Conversion Loss3 Isolation: LO-RF LO-IF 30 40 32 42 dB dB Input IP3 29 32 dBm 21 dBm Input 1 dB Compression Notes: 1. Test conditions unless otherwise noted: IF = 70 MHz, LO input drive = 17 dBm, RF input drive = 3 dBm. 2. An IF frequency of 70 MHz is a nominal frequency. The IF frequency can be specified by the user as long as the RF and LO frequencies are within the specified maximum and minimum. 3. Conversion Loss includes loss of IF transformer (M/A COM ETC1-1-13, nominal loss 0.7 dB at 70 MHz). Document No. 70-0086-04 │ www.psemi.com ©2005 Peregrine Semiconductor Corp. All rights reserved. Page 1 of 9 PE4135 Product Specification Figure 3. Pin Configuration (Top View) Table 3. Absolute Maximum Ratings Symbol IF1 GND LO 1 6 2 3 5 PE4135 4 Pin Name 1 IF1 2 GND GND RF Description IF differential output. 3 LO Ground connections for Mixer. Traces should be physically short and connect immediately to ground plane for best performance. The exposed solder pad must also be soldered to the ground plane for best performance. LO Input. 4 RF RF Input. 5 GND 6 IF2 Min Max Units Storage temperature range -65 150 °C TOP Operating temperature range -40 85 °C IF2 Table 2. Pin Descriptions Pin No. Parameter/Conditions TST Ground connections for Mixer. Traces should be physically short and connect immediately to ground plane for best performance. The exposed solder pad must also be soldered to the ground plane for best performance. IF differential output. Document No. 70-0086-04 │ www.psemi.com PLO LO input power 20 dBm PRF RF input power 12 dBm VESD ESD Sensitive Device 250 V Absolute Maximum Ratings are those values listed in the above table. Exceeding these values may cause permanent device damage. Functional operation should be restricted to the limits in the DC Electrical Specifications table. Exposure to absolute maximum ratings for extended periods may affect device reliability. Electrostatic Discharge (ESD) Precautions When handling this UltraCMOS™ device, observe the same precautions that you would use with other ESD-sensitive devices. Although this device contains circuitry to protect it from damage due to ESD, precautions should be taken to avoid exceeding the rating specified in Table 3. Latch-Up Avoidance Unlike conventional CMOS devices, UltraCMOS™ devices are immune to latch-up. ©2005 Peregrine Semiconductor Corp. All rights reserved. Page 2 of 9 PE4135 Product Specification Evaluation Kit Table 4. Bill of Materials Figure 4. Evaluation Board Layout Reference Value / Description T2 M/A Com ETK1-1-13 Pin 1 R1 0Ω U1 PE4135 MLP Mixer J1, J2, J3 SMA Connector Figure 5. Evaluation Board Schematic 3 LO 2 1 T2 IF 6-lead MLPM 3 x 3 mm RF 4 5 6 Figure 6. Evaluation Board Testing Block Diagram, 2-Tone Setup 4135 LO PA IF Eval Board 3 dB 3 dB RF Sig Gen Spectrum Analyzer 3 dB Sig Gen 6 dB Hybrid Tee ©2005 Peregrine Semiconductor Corp. All rights reserved. Page 3 of 9 6 dB Sig Gen Document No. 70-0086-04 │ UltraCMOS™ RFIC Solutions PE4135 Product Specification Typical Performance Data (LO=17 dBm, RF=3 dBm, IF=70 MHz) Figure 8. Input 1dB Compression 0 25 -2 20 1dB Compression (dB) Conversion Loss (dB) Figure 7. Conversion Loss -4 -6 -8 25 C -40 C 10 5 85 C -10 800 85 C 15 25 C 825 -40 C 850 875 900 925 0 800 950 850 Frequency (MHz) 900 950 Frequency (MHz) Figure 9. Input IP3 @ 25 °C Figure 10. Output IP3 40 30 35 25 30 20 OIP3 (dBm) IIP3 (dBm) 25 20 15 858C 258C -408C 15 10 10 5 5 0 800 825 850 875 900 Frequency (MHz) Document No. 70-0086-04 │ www.psemi.com 925 950 0 800 825 850 875 900 925 950 Frequency (MHz) ©2005 Peregrine Semiconductor Corp. All rights reserved. Page 4 of 9 PE4135 Product Specification Typical Performance Data (LO=17 dBm, RF=3 dBm, IF=70 MHz) Figure 11. LO-IF Isolation Figure 12. LO-RF Isolation 0 0 -10 LO-RF Isolation (dB) LO-IF Isolation (dB) -10 -20 -30 -40 -30 -40 -50 -40 C -40 C -60 800 -20 825 850 875 25 C 900 25 C 85 C 85 C 925 -50 800 950 825 850 Frequency (MHz) 875 900 925 950 Frequency (MHz) Figure 13. LO Port Return Loss @ 25°C Figure 14. RF Port Return Loss @ 25°C 0 0 -5 Return Loss (dB) Return Loss (dB) -5 -10 -10 -15 -20 -15 -25 -20 200 400 600 800 1000 1200 Frequency (MHz) ©2005 Peregrine Semiconductor Corp. All rights reserved. Page 5 of 9 1400 -30 200 400 600 800 1000 1200 1400 Frequency (MHz) Document No. 70-0086-04 │ UltraCMOS™ RFIC Solutions PE4135 Product Specification Typical Performance Data (LO=17 dBm, RF=3 dBm, IF=70 MHz) Figure 15. Input IP3 Across LO Power 35 30 Figure 16. Conversion Loss Across LO Power -6 LO=20dBm LO=14dBm LO=20dBm LO=14dBm LO=17dBm LO=17dBm -8 Conversion Loss (dB) Input IP3 (dBm) LO=11dBm LO=11dBm 25 LO=8dBm 20 LO=5dBm LO=8dBm -10 LO=5dBm -12 15 -14 10 800 850 900 950 800 850 Frequency (MHz) 900 950 Frequency (MHz) Table 5. Spurious Response Table 6. Spurious Response mRF+nLO mRF+nLO nLO nLO mRF 1 2 3 4 mRF 1 2 3 4 1 1 29 20 32 1 0 27 12 35 2 50 46 58 50 2 47 53 47 50 3 69 81 70 77 3 66 66 62 67 4 88 85 83 >90 4 86 83 >90 >90 Note: Normalized to dB below PIF (RF=870 Mhz @ 3 dBm, LO=940 MHz @ 17 dBm) ©2005 Peregrine Semiconductor Corp. All rights reserved. Page 6 of 9 Note: Normalized to dB below PIF (RF=870 Mhz @ 3 dBm, LO=940 MHz @ 17 dBm) Document No. 70-0086-04 │ UltraCMOS™ RFIC Solutions PE4135 Product Specification Figure 17. Package Drawing 6-lead DFN -A- 3.00 6 5 CL -B4 0.125 CL 3.00 PIN MAR 1 K 0.10 C 4 1 2 3 0.10 C 4 0.125 10°+2° -10° TOP VIEW DETAIL C 0.025 ±0.025 0.100 C 0.70 ± 0.05 0.90 ±0.10 0.20 ±0.05 SEATING PLANE 0.080 C 3 SIDE VIEW SEE DETAIL B 0.025±0.025 CL +0.08 -0.02 0.10 0.05 C 0.95 0.17 MIN. 0.24 +0.20 -0.08 0.35 EXPOSED PAD 1 DETAIL B -C- 2 C A B 0.29 3 SEE DETAIL A +0.21 -0.08 0.125 EXPOSED SLUG/ HEAT SINK 0.17 0.30 R0.127 TYP R 0.15 TYP 1.21 ±0.10 0.605 ±0.05 EXPOSED (2X) 6 5 4 3 .20 MIN. THIS FEATURE APPLIES TO BOTH ENDS OF THE PKG. EXPOSED METALIZED FEATURE DETAIL A EDGE OF PLASTIC BODY 1.05±0.05 2.01±0.10 BOTTOM VIEW 1. DIMENSIONS AND TOLERANCES ARE PER ANSi Y14.5 2. DIMENSIONS ARE IN MILLIMETERS, ANGLES ARE IN DEGREES. 3 COPLANARITY APPLIES TO EXPOSED HEAT SLUG AS WELL AS THE TERMINALS. 4 PROFILE TOLERANCE APPLIES TO PLASTIC BODY ONLY. Document No. 70-0086-04 │ www.psemi.com ©2005 Peregrine Semiconductor Corp. All rights reserved. Page 7 of 9 PE4135 Product Specification Figure 18. Tape and Reel Specifications 6-lead DFN Table 7. Dimensions Dimension DFN 3x3 mm Ao 3.23 ± 0.1 Bo 3.17 ± 0.1 Ko 1.37 ± 0.1 P 4 ± 0.1 W 8 +0.3, -0.1 T 0.254 ± 0.02 R7 Quantity 3000 R13 Quantity N.A. Note: R7 = 7 inch Lock Reel, R13 = 13 inch Lock Reel Table 8. Ordering Information Order Code Part Marking Description Package Shipping Method 4135-01 4135 PE4135-06DFN 3x3mm-12800F 6-lead 3x3 mm DFN 12800 units / Canister 4135-02 4135 PE4135-06DFN 3x3mm-3000C 6-lead 3x3 mm DFN 3000 units / T&R 4135-00 PE4135-EK PE4135-06DFN 3x3mm-EK Evaluation Kit 1 / Box 4135-51 4135 PE4135G-06DFN 3x3mm-12800F Green 6-lead 3x3 mm DFN 12800 units / Canister 4135-52 4135 PE4135G-06DFN 3x3mm-3000C Green 6-lead 3x3 mm DFN 3000 units / T&R ©2005 Peregrine Semiconductor Corp. All rights reserved. Page 8 of 9 Document No. 70-0086-04 │ UltraCMOS™ RFIC Solutions PE4135 Product Specification Sales Offices The Americas North Asia Pacific Peregrine Semiconductor Corp. Peregrine Semiconductor K.K. 9450 Carroll Park Drive San Diego, CA 92121 Tel 858-731-9400 Fax 858-731-9499 5A-5, 5F Imperial Tower 1-1-1 Uchisaiwaicho, Chiyoda-ku Tokyo 100-0011 Japan Tel: +81-3-3502-5211 Fax: +81-3-3502-5213 Europe Peregrine Semiconductor Europe Commercial Products: Bâtiment Maine 13-15 rue des Quatre Vents F- 92380 Garches, France Tel: +33-1-47-41-91-73 Fax : +33-1-47-41-91-73 Space and Defense Products: 180 Rue Jean de Guiramand 13852 Aix-En-Provence cedex 3, France Tel: +33(0) 4 4239 3361 Fax: +33(0) 4 4239 7227 South Asia Pacific Peregrine Semiconductor 28G, Times Square, No. 500 Zhangyang Road, Shanghai, 200122, P.R. China Tel: +86-21-5836-8276 Fax: +86-21-5836-7652 For a list of representatives in your area, please refer to our Web site at: www.psemi.com Data Sheet Identification Advance Information The product is in a formative or design stage. The data sheet contains design target specifications for product development. Specifications and features may change in any manner without notice. Preliminary Specification The data sheet contains preliminary data. Additional data may be added at a later date. Peregrine reserves the right to change specifications at any time without notice in order to supply the best possible product. Product Specification The data sheet contains final data. In the event Peregrine decides to change the specifications, Peregrine will notify customers of the intended changes by issuing a DCN (Document Change Notice). Document No. 70-0086-04 │ www.psemi.com The information in this data sheet is believed to be reliable. However, Peregrine assumes no liability for the use of this information. Use shall be entirely at the user’s own risk. No patent rights or licenses to any circuits described in this data sheet are implied or granted to any third party. Peregrine’s products are not designed or intended for use in devices or systems intended for surgical implant, or in other applications intended to support or sustain life, or in any application in which the failure of the Peregrine product could create a situation in which personal injury or death might occur. Peregrine assumes no liability for damages, including consequential or incidental damages, arising out of the use of its products in such applications. The Peregrine name, logo, and UTSi are registered trademarks and UltraCMOS is a trademark of Peregrine Semiconductor Corp. ©2005 Peregrine Semiconductor Corp. All rights reserved. Page 9 of 9