5-1-1 Unicolor lamps ■5φ Round Wide Viewing Angle LEDs SEL1010XM Series Part Number Emitting Color * SELU1610CXM-S * * * * * SELU1210CXM SELU1810CXM SELU1B10CXM-S SELU1910CXM-S SELU1710CXM SELU1410CXM-S SELT1D10CXM-S SELS1L10CXM-S SELS1E10CXM-M SELT1E10CXM-S SELT1E10WXM-S SELK1E10CXM-D Forward Voltage Luminous Intensity Peak Wavelength Dominant Wavelength Spectrum Half Bandwidth Iv λP λd ∆λ Conditions Conditions Conditions Conditions Conditions VF (nm) (nm) (nm) (mcd) IF (mA) IF (mA) IF (mA) IF (mA) IF (mA) (V) TYP MAX TYP TYP TYP TYP Lens Color Deep red Red Amber Light amber Orange Ultrahigh Yellow luminosity Green Pure green Aqua blue Blue Blue Blue High Blue luminosity Water clear Water clear Water clear Water clear Water clear Water clear Water clear Water clear Water clear Water clear Water clear Diffused white Water clear 2.0 2.0 2.0 2.0 2.0 2.1 2.1 3.3 3.6 3.7 3.3 3.3 3.6 2.5 2.5 2.5 2.5 2.5 2.5 2.5 4.0 4.0 4.2 4.0 4.0 4.0 20 20 20 20 20 20 20 20 20 20 20 20 20 350 280 570 350 450 300 150 3200 1500 1000 1000 255 200 20 20 20 20 20 20 20 20 20 20 20 20 20 650 635 615 598 591 572 560 512 486 468 460 460 468 20 20 20 20 20 20 20 20 20 20 20 20 20 639 625 607 595 590 571 562 520 488 470 465 465 470 20 20 20 20 20 20 20 20 20 20 20 20 20 20 15 15 16 15 15 12 35 30 25 25 25 30 20 20 20 20 20 20 20 20 20 20 20 20 20 Chip Material AlGaInP AlGaInP AlGaInP AlGaInP AlGaInP AlGaInP AlGaInP InGaN InGaN InGaN InGaN InGaN GaN on Si * Mass production in preparation Directional Characteristics (representative example) (Unit: mm) External Dimensions –90° 100% 50 0 AlGaInP 50 90° 100% –90° 100% 60° 50 0 InGaN 50 90° 100% Cathode –60° 23.0min 60° 30° 1.0min –60° –30° (1.0) 6.9±0.2 0 30° ø5.6±0.2 0 –30° 0.65max 0.5±0.1 (2.54) 0.5±0.1 ø5.0±0.2 Resin heap 1.5max Dimensional Tolerance: ±0.3 Product Mass: Approx. 0.30 g LEDs 221 5-1 Visible Light LEDs Absolute Maximum Ratings ●Visible Light Unicolor Lamp Parameter Unit PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C Ratings GaP GaAsP GaAlAs AlGaInP InGaN 75 Conditions GaN 120 30 −0.45 25°C or higher f=1kHz, tw≤100 µ s 70 100 3 5 −30 to +80 −30 to +85 −30 to +100 ●Visible Light Bicolor Lamp Parameter Unit PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C GaP Ratings GaAlAs GaAsP 75 AlGaInP Conditions InGaN 120 Same conditions for simultaneous lighting 30 −0.45 100 25°C or higher f=1kHz, tw≤100 µ s 4 5 −30 to +85 −30 to +100 ●Visible Light Unicolor Surface Mount LEDs Parameter Unit IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C Ratings GaP GaAsP GaAlAs AlGaInP InGaN Conditions GaN 20 −0.27 70*2 30 −0.45 100*1 25°C or higher f=1kHz, tw≤100 µs 5 3 −30 to +85 −30 to +100 −30 to +80 *1: 70mA for SEC1005/1007 Series *2: 50mA for SEC1005/1007 Series ●Visible Light Bicolor Surface Mount LEDs Ratings Parameter Unit PD mW IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C Conditions SEC2002/2004 75 (Same conditions for simultaneous lighting) 30 −0.45 70 4 −30 to +85 −30 to +100 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Three Element Surface Mount LEDs Parameter 218 PD mW IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C LEDs Ratings SECT3M02C-S Unit Conditions Red Green/Blue 75 120 30 −0.45 50 70 5 −30 to +80 −30 to +100 When one chip lights up (same as green/blue for simultaneous lighting) 25°C or higher f=1kHz, tw≤100 µs