5-1-3 Unicolor surface mount ■Side View Surface Mount LEDs (Inner Lens Type) SEC4003 Series Part Number * * * * * * Lens Color Emitting Color SEC4203C SEC4803C SEC4903C SEC4703C SEC4403C SEC4403E-TG SEC4503C Water clear Water clear Water clear Water clear Water clear Transparent green Water clear Red Amber Orange Yellow Green Deep green Pure green Forward Voltage Luminous Intensity Peak Wavelength Dominant Wavelength Spectrum Half Bandwidth Iv λP λd ∆λ Conditions Conditions Conditions Conditions Conditions VF (nm) (nm) (nm) (mcd) IF (mA) IF (mA) IF (mA) IF (mA) IF (mA) (V) TYP MAX TYP TYP TYP TYP 1.9 2.5 10 15 20 630 10 620 10 35 10 1.9 2.5 10 20 20 610 10 605 10 35 10 1.9 2.5 10 15 20 587 10 590 10 33 10 2.0 2.5 10 35 20 570 10 571 10 30 10 2.0 2.5 10 33 20 560 10 567 10 20 10 2.0 2.5 10 15 20 558 10 564 10 20 10 2.0 2.5 10 10 20 555 10 559 10 20 10 Chip Material GaAsP GaAsP GaAsP GaP GaP GaP GaP *Mass production in preparation External Dimensions Directional Characteristics (representative example) (Unit: mm) Dimensional Tolerance: ±0.3 0° 30° ±0.1 30° 1.4 1.5 90° 100% 50 0 50 90° 100% 90° 100% 0.9 50 0 50 90° 100% (0.5) 0.6 60° 2.0 1.7 60° 2.53 60° 3.0 60° Cathode mark 1.03 ø1.0 30° 1.6 0° 30° 1.3 Cathode Electrode burr MAX 0.1 0.45 Resin Lens P.C.B. Anode PCB Product Mass: Approx. 0.008 g 252 LEDs 5-1 Visible Light LEDs Absolute Maximum Ratings ●Visible Light Unicolor Lamp Parameter Unit PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C Ratings GaP GaAsP GaAlAs AlGaInP InGaN 75 Conditions GaN 120 30 −0.45 25°C or higher f=1kHz, tw≤100 µ s 70 100 3 5 −30 to +80 −30 to +85 −30 to +100 ●Visible Light Bicolor Lamp Parameter Unit PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C GaP Ratings GaAlAs GaAsP 75 AlGaInP Conditions InGaN 120 Same conditions for simultaneous lighting 30 −0.45 100 25°C or higher f=1kHz, tw≤100 µ s 4 5 −30 to +85 −30 to +100 ●Visible Light Unicolor Surface Mount LEDs Parameter Unit IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C Ratings GaP GaAsP GaAlAs AlGaInP InGaN Conditions GaN 20 −0.27 70*2 30 −0.45 100*1 25°C or higher f=1kHz, tw≤100 µs 5 3 −30 to +85 −30 to +100 −30 to +80 *1: 70mA for SEC1005/1007 Series *2: 50mA for SEC1005/1007 Series ●Visible Light Bicolor Surface Mount LEDs Ratings Parameter Unit PD mW IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C Conditions SEC2002/2004 75 (Same conditions for simultaneous lighting) 30 −0.45 70 4 −30 to +85 −30 to +100 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Three Element Surface Mount LEDs Parameter 218 PD mW IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C LEDs Ratings SECT3M02C-S Unit Conditions Red Green/Blue 75 120 30 −0.45 50 70 5 −30 to +80 −30 to +100 When one chip lights up (same as green/blue for simultaneous lighting) 25°C or higher f=1kHz, tw≤100 µs