5-1-1 Unicolor lamps ■3φ Inverted-Cone LEDs (for lighting-panels) SEL6013 Series (available as Direct Mount) Green Deep green Pure green Ultrahigh Red luminosity Light amber Transparent green Transparent green Water clear Water clear Diffused white Forward Voltage Luminous Intensity Peak Wavelength Dominant Wavelength Spectrum Half Bandwidth Iv λP λd ∆λ Conditions Conditions Conditions Conditions Conditions VF (nm) (nm) (nm) (mcd) IF (mA) IF (mA) IF (mA) IF (mA) IF (mA) (V) TYP MAX TYP TYP TYP TYP 2.0 2.5 10 14 20 560 10 567 10 20 10 2.0 2.5 10 6.0 20 558 10 564 10 20 10 2.0 2.5 10 5.0 20 555 10 559 10 20 10 2.0 2.5 20 30 20 632 20 624 20 20 20 2.0 2.5 20 60 20 600 20 596 20 15 20 External Dimensions Directional Characteristics (representative example) Chip Material GaP GaP GaP AlGaInP AlGaInP (Unit: mm) Resin burr 0.3max Resin heap 0.8max Dimensional Tolerance: ±0.3 90° 100% 60° 50 0 50 90° 100% 23.0min 60° 4.5 30° 0.65max 0.45±0.1 0.4±0.1 (2.54) 0.8±0.2 Cathode 0° 30° (1.7) 2.5±0.1 ø3.5±0.1 1.0min SEL6413E SEL6413E-TG SEL6513C SELU6213C-S SELS6B13W Lens Color Emitting Color 3.5 Part Number 4.0±0.2 4.4 Product Mass: Approx. 0.13 g LEDs 235 5-1 Visible Light LEDs Absolute Maximum Ratings ●Visible Light Unicolor Lamp Parameter Unit PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C Ratings GaP GaAsP GaAlAs AlGaInP InGaN 75 Conditions GaN 120 30 −0.45 25°C or higher f=1kHz, tw≤100 µ s 70 100 3 5 −30 to +80 −30 to +85 −30 to +100 ●Visible Light Bicolor Lamp Parameter Unit PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C GaP Ratings GaAlAs GaAsP 75 AlGaInP Conditions InGaN 120 Same conditions for simultaneous lighting 30 −0.45 100 25°C or higher f=1kHz, tw≤100 µ s 4 5 −30 to +85 −30 to +100 ●Visible Light Unicolor Surface Mount LEDs Parameter Unit IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C Ratings GaP GaAsP GaAlAs AlGaInP InGaN Conditions GaN 20 −0.27 70*2 30 −0.45 100*1 25°C or higher f=1kHz, tw≤100 µs 5 3 −30 to +85 −30 to +100 −30 to +80 *1: 70mA for SEC1005/1007 Series *2: 50mA for SEC1005/1007 Series ●Visible Light Bicolor Surface Mount LEDs Ratings Parameter Unit PD mW IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C Conditions SEC2002/2004 75 (Same conditions for simultaneous lighting) 30 −0.45 70 4 −30 to +85 −30 to +100 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Three Element Surface Mount LEDs Parameter 218 PD mW IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C LEDs Ratings SECT3M02C-S Unit Conditions Red Green/Blue 75 120 30 −0.45 50 70 5 −30 to +80 −30 to +100 When one chip lights up (same as green/blue for simultaneous lighting) 25°C or higher f=1kHz, tw≤100 µs