5-1-1 Unicolor lamps ■5φ Round Standard LEDs SEL1010M Series Part Number SEL1210RM SEL1210SM SEL1810AM SEL1810DM SEL1910AM SEL1910DM SEL1710KM SEL1410EM SEL1410GM SEL1510CM Emitting Color Red Red Amber Amber Orange Orange Yellow Green Green Pure green Lens Color Diffused red Transparent red Transparent orange Diffused orange Transparent orange Diffused orange Transparent yellow Transparent green Diffused green Water clear Forward Voltage Luminous Intensity Peak Wavelength Dominant Wavelength Spectrum Half Bandwidth Iv λP λd ∆λ Conditions Conditions Conditions Conditions Conditions VF (nm) (nm) (nm) (mcd) IF (mA) IF (mA) IF (mA) IF (mA) IF (mA) (V) TYP MAX TYP TYP TYP TYP 1.9 2.5 10 36 20 630 10 620 10 35 10 1.9 2.5 10 75 20 630 10 620 10 35 10 1.9 2.5 10 37 10 610 10 605 10 35 10 1.9 2.5 10 18 10 610 10 605 10 35 10 1.9 2.5 10 34 10 587 10 590 10 33 10 1.9 2.5 10 19 10 587 10 590 10 33 10 2.0 2.5 10 65 10 570 10 571 10 30 10 2.0 2.5 10 84 20 560 10 567 10 20 10 2.0 2.5 10 30 20 560 10 567 10 20 10 2.0 2.5 10 50 20 555 10 559 10 20 10 Directional Characteristics (representative example) Chip Material GaAsP GaAsP GaAsP GaAsP GaAsP GaAsP GaP GaP GaP GaP (Unit: mm) External Dimensions ø5.0±0.2 50 0 90° 100% 90° 100% 50 0 50 90° 100% 0.65max 0.5±0.1 (2.54) Transparent lens ø5.6±0.2 Diffused lens 50 60° 0.5±0.1 90° 100% 60° Cathode 60° 30° 23.0min 60° 30° (1.0) 7.6±0.2 0° 30° 1.0min 0° 30° Resin heap 1.5max Dimensional Tolerance: ±0.3 Product Mass: Approx. 0.30 g 220 LEDs 5-1 Visible Light LEDs Absolute Maximum Ratings ●Visible Light Unicolor Lamp Parameter Unit PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C Ratings GaP GaAsP GaAlAs AlGaInP InGaN 75 Conditions GaN 120 30 −0.45 25°C or higher f=1kHz, tw≤100 µ s 70 100 3 5 −30 to +80 −30 to +85 −30 to +100 ●Visible Light Bicolor Lamp Parameter Unit PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C GaP Ratings GaAlAs GaAsP 75 AlGaInP Conditions InGaN 120 Same conditions for simultaneous lighting 30 −0.45 100 25°C or higher f=1kHz, tw≤100 µ s 4 5 −30 to +85 −30 to +100 ●Visible Light Unicolor Surface Mount LEDs Parameter Unit IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C Ratings GaP GaAsP GaAlAs AlGaInP InGaN Conditions GaN 20 −0.27 70*2 30 −0.45 100*1 25°C or higher f=1kHz, tw≤100 µs 5 3 −30 to +85 −30 to +100 −30 to +80 *1: 70mA for SEC1005/1007 Series *2: 50mA for SEC1005/1007 Series ●Visible Light Bicolor Surface Mount LEDs Ratings Parameter Unit PD mW IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C Conditions SEC2002/2004 75 (Same conditions for simultaneous lighting) 30 −0.45 70 4 −30 to +85 −30 to +100 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Three Element Surface Mount LEDs Parameter 218 PD mW IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C LEDs Ratings SECT3M02C-S Unit Conditions Red Green/Blue 75 120 30 −0.45 50 70 5 −30 to +80 −30 to +100 When one chip lights up (same as green/blue for simultaneous lighting) 25°C or higher f=1kHz, tw≤100 µs