5-1-1 Unicolor lamps ■5φ Round Narrow Viewing Angle LEDs SEL1050M Series (available as Direct Mount) Part Number SEL1250RM SEL1250SM SEL1850AM SEL1850DM SEL1950KM SEL1450EKM SEL1450GM-YG SEL1550CM SEL1E50CM-S SELU1250CM * SELT1D50CM-S SELT1E50CM-S Emitting Color Lens Color Red Red Amber Amber Orange Green Green Pure green Blue Red Ultrahigh Pure green luminosity Blue Diffused red Transparent red Transparent orange Diffused orange Transparent orange Transparent green Diffused green Water clear Water clear Water clear Water clear Water clear Forward Voltage Luminous Intensity Peak Wavelength Dominant Wavelength Spectrum Half Bandwidth Iv λP λd ∆λ Conditions Conditions Conditions Conditions Conditions VF (nm) (nm) (nm) (mcd) IF (mA) IF (mA) IF (mA) IF (mA) IF (mA) (V) TYP MAX TYP TYP TYP TYP 1.9 2.5 10 48 20 630 10 620 10 35 10 1.9 2.5 10 75 20 630 10 620 10 35 10 1.9 2.5 10 90 20 610 10 605 10 35 10 1.9 2.5 10 60 20 610 10 605 10 35 10 1.9 2.5 10 96 20 587 10 590 10 33 10 2.0 2.5 10 190 20 560 10 567 10 20 10 2.0 2.5 10 120 20 560 10 567 10 20 10 2.0 2.5 10 72 20 555 10 559 10 20 10 4.0 4.6 10 80 10 430 10 466 10 65 10 2.0 2.5 20 900 20 635 20 625 20 15 20 3.3 4.0 20 6500 20 512 20 520 20 35 20 3.3 4.0 20 2000 20 460 20 465 20 25 20 Chip Material GaAsP GaAsP GaAsP GaAsP GaAsP GaP GaP GaP GaN AlGaInP InGaN InGaN * Mass production in preparation Directional Characteristics (representative example) (Unit: mm) External Dimensions Dimensional Tolerance: ±0.3 –90° 100% 50 0 50 90° 100% 90° 100% 60° 50 0 50 90° 100% 0.65 max 0.5±0.1 21.0min 60° 0.5±0.1 Transparent lens Anode (2.54) Diffused lens 1.0min 60° 30° Resin burr 0.3max –60° 30° 9.4±0.3 0° 30° ±0.2 Cathode 0 –30° Resin heap 0.8max ø5.0 Product Mass: Approx. 0.30 g 222 LEDs 5-1 Visible Light LEDs Absolute Maximum Ratings ●Visible Light Unicolor Lamp Parameter Unit PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C Ratings GaP GaAsP GaAlAs AlGaInP InGaN 75 Conditions GaN 120 30 −0.45 25°C or higher f=1kHz, tw≤100 µ s 70 100 3 5 −30 to +80 −30 to +85 −30 to +100 ●Visible Light Bicolor Lamp Parameter Unit PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C GaP Ratings GaAlAs GaAsP 75 AlGaInP Conditions InGaN 120 Same conditions for simultaneous lighting 30 −0.45 100 25°C or higher f=1kHz, tw≤100 µ s 4 5 −30 to +85 −30 to +100 ●Visible Light Unicolor Surface Mount LEDs Parameter Unit IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C Ratings GaP GaAsP GaAlAs AlGaInP InGaN Conditions GaN 20 −0.27 70*2 30 −0.45 100*1 25°C or higher f=1kHz, tw≤100 µs 5 3 −30 to +85 −30 to +100 −30 to +80 *1: 70mA for SEC1005/1007 Series *2: 50mA for SEC1005/1007 Series ●Visible Light Bicolor Surface Mount LEDs Ratings Parameter Unit PD mW IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C Conditions SEC2002/2004 75 (Same conditions for simultaneous lighting) 30 −0.45 70 4 −30 to +85 −30 to +100 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Three Element Surface Mount LEDs Parameter 218 PD mW IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C LEDs Ratings SECT3M02C-S Unit Conditions Red Green/Blue 75 120 30 −0.45 50 70 5 −30 to +80 −30 to +100 When one chip lights up (same as green/blue for simultaneous lighting) 25°C or higher f=1kHz, tw≤100 µs