5-1-1 Unicolor lamps ■3φ Round Wide Viewing Angle LEDs SEL2014 Series High luminosity Ultrahigh luminosity Green Blue Orange Yellow Water clear Directional Characteristics (representative example) Chip Material GaN on Si GaN on Si AIGalnP AIGalnP (Unit: mm) External Dimensions 30° –60° 60° 3.5 MAX 0.65 –90° 100% 50 0 50 Cathode 0.45±0.1 90° 100% (2.54) Transparent lens 4.1±0.5 –30° Cathode mark ø3.5±0.1 (1.6) 2.5 0° MIN 23.0 MAX 0.8 Resin heap Dimensional Tolerance: ±0.3 0.4±0.1 MIN 1.0 SELK2D14C-D SELK2E14C-D SELU2914C-S SELU2714C Forward Voltage Luminous Intensity Peak Wavelength Dominant Wavelength Spectrum Half Bandwidth Iv λP λd ∆λ Conditions Conditions Conditions Conditions Conditions VF (nm) (nm) (nm) (mcd) IF (mA) IF (mA) IF (mA) IF (mA) IF (mA) (V) TYP MAX TYP TYP TYP TYP 3.7 4.0 20 120 20 514 20 520 20 40 20 3.6 4.0 20 40 20 468 20 470 20 30 20 2.0 2.5 20 180 20 591 20 590 20 15 20 2.1 2.5 20 60 20 572 20 571 20 15 20 Lens Color Emitting Color MAX 0.3 Resin burr Part Number 4.4 LEDs 231 5-1 Visible Light LEDs Absolute Maximum Ratings ●Visible Light Unicolor Lamp Parameter Unit PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C Ratings GaP GaAsP GaAlAs AlGaInP InGaN 75 Conditions GaN 120 30 −0.45 25°C or higher f=1kHz, tw≤100 µ s 70 100 3 5 −30 to +80 −30 to +85 −30 to +100 ●Visible Light Bicolor Lamp Parameter Unit PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C GaP Ratings GaAlAs GaAsP 75 AlGaInP Conditions InGaN 120 Same conditions for simultaneous lighting 30 −0.45 100 25°C or higher f=1kHz, tw≤100 µ s 4 5 −30 to +85 −30 to +100 ●Visible Light Unicolor Surface Mount LEDs Parameter Unit IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C Ratings GaP GaAsP GaAlAs AlGaInP InGaN Conditions GaN 20 −0.27 70*2 30 −0.45 100*1 25°C or higher f=1kHz, tw≤100 µs 5 3 −30 to +85 −30 to +100 −30 to +80 *1: 70mA for SEC1005/1007 Series *2: 50mA for SEC1005/1007 Series ●Visible Light Bicolor Surface Mount LEDs Ratings Parameter Unit PD mW IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C Conditions SEC2002/2004 75 (Same conditions for simultaneous lighting) 30 −0.45 70 4 −30 to +85 −30 to +100 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Three Element Surface Mount LEDs Parameter 218 PD mW IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C LEDs Ratings SECT3M02C-S Unit Conditions Red Green/Blue 75 120 30 −0.45 50 70 5 −30 to +80 −30 to +100 When one chip lights up (same as green/blue for simultaneous lighting) 25°C or higher f=1kHz, tw≤100 µs