5-1-2 Bicolor lamps ■Egg-Shaped Bicolor LEDs SML70055 Series (available as Direct Mount) Part Number Emitting Color A: Red B: Yellow A: Orange B: Red A: Orange B: Green SML72755C SML79255C SML79455C Water clear Water clear Water clear A: Red Ultrahigh B: Yellow luminosity A: Amber B: Yellow SMLU72755C SMLU78755C Forward Voltage Luminous Intensity Peak Wavelength Dominant Wavelength Spectrum Half Bandwidth Iv λP λd ∆λ Conditions Conditions Conditions Conditions Conditions VF (nm) (nm) (nm) (mcd) IF (mA) IF (mA) IF (mA) IF (mA) IF (mA) (V) TYP MAX TYP TYP TYP TYP 1.9 2.5 10 45 20 630 10 620 10 35 10 2.0 2.5 10 75 20 570 10 571 10 30 10 1.9 2.5 10 40 20 587 10 590 10 33 10 2.0 2.5 10 45 20 630 10 620 10 35 10 1.9 2.5 10 45 20 587 10 590 10 33 10 2.0 2.5 10 75 20 560 10 567 10 20 10 2.0 2.5 10 160 20 635 10 625 20 15 10 2.0 2.5 10 170 20 572 10 571 20 15 10 2.0 2.5 10 280 20 615 10 607 20 15 10 2.0 2.5 10 170 20 572 10 571 20 15 10 Lens Color Water clear Water clear Chip Material GaAsP GaP GaAsP GaAsP GaAsP GaP AlGaInP AlGaInP AlGaInP AlGaInP Remark Cathode common Cathode common Cathode common Cathode common Cathode common External Dimensions Directional Characteristics (representative example) (Unit: mm) Dimensional Tolerance: ±0.3 60° 30° 60° 90° 100% 50 0 50 90° 100% 30° 60° 90° 100% 5.6±0.2 60° 50 0 50 90° 100% B 0° 30° 0° A 30° 60° 30° 60° 30° 60° 0.65max 1.0min 1.5min Water Clear 60° 4.55±0.2 0.5±0.1 0.5±0.1 (2.54) (2.54) 4.65±0.2 30° Reisin burr 0.3max Reisin heap 0.8max 0° A 7.3±0.5 (0.3) 0° 20.0min B 30° 6.2±0.2 Internal Circuit Drawing 90° 100% 50 0 50 90° 100% 90° 100% Diffused White 248 LEDs 50 0 50 90° 100% Product Mass: Approx. 0.31 g 5-1 Visible Light LEDs Absolute Maximum Ratings ●Visible Light Unicolor Lamp Parameter Unit PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C Ratings GaP GaAsP GaAlAs AlGaInP InGaN 75 Conditions GaN 120 30 −0.45 25°C or higher f=1kHz, tw≤100 µ s 70 100 3 5 −30 to +80 −30 to +85 −30 to +100 ●Visible Light Bicolor Lamp Parameter Unit PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C GaP Ratings GaAlAs GaAsP 75 AlGaInP Conditions InGaN 120 Same conditions for simultaneous lighting 30 −0.45 100 25°C or higher f=1kHz, tw≤100 µ s 4 5 −30 to +85 −30 to +100 ●Visible Light Unicolor Surface Mount LEDs Parameter Unit IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C Ratings GaP GaAsP GaAlAs AlGaInP InGaN Conditions GaN 20 −0.27 70*2 30 −0.45 100*1 25°C or higher f=1kHz, tw≤100 µs 5 3 −30 to +85 −30 to +100 −30 to +80 *1: 70mA for SEC1005/1007 Series *2: 50mA for SEC1005/1007 Series ●Visible Light Bicolor Surface Mount LEDs Ratings Parameter Unit PD mW IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C Conditions SEC2002/2004 75 (Same conditions for simultaneous lighting) 30 −0.45 70 4 −30 to +85 −30 to +100 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Three Element Surface Mount LEDs Parameter 218 PD mW IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C LEDs Ratings SECT3M02C-S Unit Conditions Red Green/Blue 75 120 30 −0.45 50 70 5 −30 to +80 −30 to +100 When one chip lights up (same as green/blue for simultaneous lighting) 25°C or higher f=1kHz, tw≤100 µs