5-1-2 Bicolor lamps ■5φ Round Bicolor LEDs SML10051 Series Forward Voltage Part Number SML12451W Emitting Color A: Red B: Green Diffused white TYP 1.9 2.0 Luminous Intensity Peak Wavelength Conditions IF (mA) VF (V) Lens Color MAX 2.5 2.5 10 10 Iv Conditions (mcd) IF (mA) TYP 40 20 60 20 λP Conditions (nm) IF (mA) TYP 630 10 560 10 Dominant Wavelength Spectrum Half Bandwidth λd Conditions (nm) IF (mA) TYP 620 10 567 10 ∆λ Conditions (nm) IF (mA) TYP 35 10 20 10 Chip Material GaAsP Cathode common GaP External Dimensions Directional Characteristics (representative example) Remark (Unit: mm) 50 0 50 90° 100% 0.65max 3 – 0.5±0.1 3 – 0.5±0.1 (2.54) (2.54) 0.5±0.1 90° 100% 60° 1.0min 1.5min 17.0min 60° (2.0) 30° 9.6±0.2 B 0° A 30° 0.8 1.2 11.6±0.5 ø5.0±0.2 Resin burr 0.3max Resin heap1.5max Dimensional Tolerance: ±0.3 Internal Circuit Drawing Product Mass: Approx. 0.36 g 246 LEDs 5-1 Visible Light LEDs Absolute Maximum Ratings ●Visible Light Unicolor Lamp Parameter Unit PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C Ratings GaP GaAsP GaAlAs AlGaInP InGaN 75 Conditions GaN 120 30 −0.45 25°C or higher f=1kHz, tw≤100 µ s 70 100 3 5 −30 to +80 −30 to +85 −30 to +100 ●Visible Light Bicolor Lamp Parameter Unit PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C GaP Ratings GaAlAs GaAsP 75 AlGaInP Conditions InGaN 120 Same conditions for simultaneous lighting 30 −0.45 100 25°C or higher f=1kHz, tw≤100 µ s 4 5 −30 to +85 −30 to +100 ●Visible Light Unicolor Surface Mount LEDs Parameter Unit IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C Ratings GaP GaAsP GaAlAs AlGaInP InGaN Conditions GaN 20 −0.27 70*2 30 −0.45 100*1 25°C or higher f=1kHz, tw≤100 µs 5 3 −30 to +85 −30 to +100 −30 to +80 *1: 70mA for SEC1005/1007 Series *2: 50mA for SEC1005/1007 Series ●Visible Light Bicolor Surface Mount LEDs Ratings Parameter Unit PD mW IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C Conditions SEC2002/2004 75 (Same conditions for simultaneous lighting) 30 −0.45 70 4 −30 to +85 −30 to +100 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Three Element Surface Mount LEDs Parameter 218 PD mW IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C LEDs Ratings SECT3M02C-S Unit Conditions Red Green/Blue 75 120 30 −0.45 50 70 5 −30 to +80 −30 to +100 When one chip lights up (same as green/blue for simultaneous lighting) 25°C or higher f=1kHz, tw≤100 µs