2N2907ADCSM SEME LAB DUAL HIGH SPEED, MEDIUM POWER PNP SWITCHING TRANSISTOR IN A HERMETICALLY SEALED CERAMIC SURFACE MOUNT PACKAGE FOR HIGH RELIABILITY APPLICATIONS MECHANICAL DATA Dimensions in mm (inches) FEATURES 1 4 A 6 5 6.22 ± 0.13 (0.245 ± 0.005) 0.23 rad. (0.009) A = 1.27 ± 0.13 (0.05 ± 0.005) LCC2 PACKAGE Underside View PAD 1 – Collector 1 PAD 2 – Base 1 PAD 3 – Base 2 PAD 4 – Collector 2 PAD 5 – Emitter 2 PAD 6 – Emitter 1 • DUAL SILICON PLANAR EPITAXIAL PNP TRANSISTORS 4.32 ± 0.13 (0.170 ± 0.005) 3 2 1.40 ± 0.15 (0.055 ± 0.006) 1.65 ± 0.13 (0.065 ± 0.005) 0.64 ± 0.06 (0.025 ± 0.003) 2.54 ± 0.13 (0.10 ± 0.005) 2.29 ± 0.20 (0.09 ± 0.008) • HERMETIC CERAMIC SURFACE MOUNT PACKAGE • CECC SCREENING OPTIONS • SPACE QUALITY LEVELS OPTIONS • HIGH SPEED SATURATED SWITCHING APPLICATIONS: Hermetically sealed dual surface mount version of the popular 2N2907A for high reliability / space applications requiring small size and low weight devices. ABSOLUTE MAXIMUM RATINGS (TC = 25°C unless otherwise stated) VCBO VCEO VEBO IC PD PD RθJA RθJC TSTG,Tj PER SIDE Collector - Base Voltage Collector - Emitter Voltage Emitter - Base Voltage Collector Current TOTAL DEVICE Total Device Dissipation Derate above 50°C Thermal Resistance Junction to Ambient Thermal Resistance Junction to Case Storage Temperature, Operating temp range –60V –60V –5V -600mA 350mW 2.0mW / °C 130°C / W 60°C / W –55 to 200°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 7581 Issue 1 2N2907ADCSM SEME LAB ELECTRICAL CHARACTERISTICS PER SIDE (TC = 25°C unless otherwise stated) Parameter Test Conditions Min. Typ. Max. Unit VCEO(BR)* Collector – Emitter Breakdown Voltage IC = -10mA –60 V VCBO(BR)* Collector – Base Breakdown Voltage IC = -10µA –60 V V(BR)EBO* Emitter – Base Breakdown Voltage IE = -10µA IC = 0 –5 V ICEX* Collector Cut-off Current VCE = -30V VBE = -0.5V -50 ICBO* Collector – Base Cut-off Current IE = 0 VCB = -50V -0.01 IBEO Base Cut-off Current VCE(sat)* Collector – Emitter Saturation Voltage VBE(sat)* Base – Emitter Saturation Voltage hFE* TC = 125°C DC Current Gain -10 VCE = -30V VBE = -0.5V -50 IC = -150mA IB = -15mA –0.4 IC = -500mA IB = -50mA –1.6 IC = -150mA IB = -15mA –1.3 IC = -500mA IB = -50mA –2.6 IC =- 0.1mA VCE = -10V 75 IC = -1.0mA VCE = -10V 100 IC = -10mA VCE = -10V 100 IC = -150mA VCE = -10V 100 IC = -500mA VCE = -10V 50 nA µA nA V V — 300 * Pulse test tp = 300µs , δ ≤ 2% DYNAMIC CHARACTERISTICS PER SIDE (TC = 25°C unless otherwise stated) Parameter Test Conditions Min. Typ. Max. Unit fT Transition Frequency IC = -50mA VCE = -20V f = 100MHz Cob Output Capacitance VCB = -10V IE = 0 f = 1.0MHz 8 pF Cib Input Capacitance VBE = -2V IC = 0 f = 1.0MHz 30 pF 200 MHz SWITCHING CHARACTERISTICS PER SIDE (RESISTIVE LOAD) (TC = 25°C unless otherwise stated) Parameter ton Turn-on Time toff Turn-off Time Test Conditions VCC = -30V IC = -150mA IB1 = -15mA Min. Typ. Max. Unit 45 ns 300 ns Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 7581 Issue 1