SEME-LAB 2N3250CSM

SEME
2N3250CSM
LAB
GENERAL PURPOSE
PNP TRANSISTOR IN A
HERMETICALLY SEALED
CERAMIC SURFACE MOUNT PACKAGE
FOR HIGH RELIABILITY APPLICATIONS
MECHANICAL DATA
Dimensions in mm (inches)
0.31 rad.
(0.012)
FEATURES
3
2
• SILICON PLANAR EPITAXIALPNP
TRANSISTOR
0.76 ± 0.15
(0.03 ± 0.006)
2.54 ± 0.13
(0.10 ± 0.005)
0.51 ± 0.10
(0.02 ± 0.004)
1
1.91 ± 0.10
(0.075 ± 0.004)
• HERMETIC CERAMIC SURFACE MOUNT
PACKAGE (SOT23 COMPATIBLE)
0.31 rad.
(0.012)
3.05 ± 0.13
(0.12 ± 0.005)
A=
1.02 ± 0.10
(0.04 ± 0.004)
A
1.40
(0.055)
max.
• CECC SCREENING OPTIONS
• SPACE QUALITY LEVELS OPTIONS
• HIGH SPEED SATURATED SWITCHING
SOT23 CERAMIC
(LCC1 PACKAGE)
Underside View
PAD 1 – Base
PAD 2 – Emitter
PAD 3 – Collector
ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise stated)
VCBO
VCEO
VEBO
IC
PD
PD
TSTG , TJ
RθJA
RθJC
Collector – Base Voltage
Collector – Emitter Voltage
Emitter – Base Voltage
Collector Current
Total Device Dissipation @ TA =25°C
Derate above 25°C
Total Device Dissipation @ TA =25°C
Derate above 25°C
Operating and Storage Temperature Range
Thermal Resistance Junction – Ambient
Thermal Resistance Junction – Case
-40V
-50V
-5.0V
-200mA
0.36W
2.06mW / °C
1.2W
6.9mW / °C
–65 to +200°C
486°C/W
146°C/W
Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed
to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use.
Semelab encourages customers to verify that datasheets are current before placing orders.
Semelab plc.
Telephone +44(0)1455 556565. Fax +44(0)1455 552612.
E-mail: [email protected]
Website: http://www.semelab.co.uk
Document Number 2539
Issue 2
SEME
2N3250CSM
LAB
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise stated)
Parameter
Test Conditions
Min.
Typ.
Max. Unit
V(BR)CEO*
Collector – Emitter Breakdown Voltage IC = -10mA
IB = 0
-40
V(BR)CBO
Collector – Base Breakdown Voltage
IC = 10µA
IE = 0
-50
V(BR)EBO
Emitter – Base Breakdown Voltage
IE = 10µA
IC = 0
-5
ICEX
Collector – Cut-off Current
VCE = -40V
VEB = -3V
-20
IBL
Base Cutoff Current
VCE = -40V
VEB = -3V
-50
IC = -10mA
IB = -1mA
-25
IC = -50mA
IB = - 5mA
-0.5
IC = -10mA
IB = -1mA
IC = -50mA
IB = - 5mA
VCE = -1V
IC = -0.1mA
40
VCE = -1V
IC = -1mA
45
VCE = -1V
IC = -10mA
50
VCE = -20V
IC = -10mA
V
nA
ON CHARACTERISTICS
VCE(sat)
Collector – Emitter Saturation Voltage
VBE(sat)*
Base – Emitter Saturation Voltage
hFE*
DC Current Gain
-0.6
-0.9
-1.2
V
V
—
150
SMALL SIGNAL CHARACTERISTICS
ft
Current Gain Bandwidth Product
Cobo
Output Capacitance
Cibo
Input Capacitance
hie
Input Impedance
hre
Voltage Feedback Ratio
VCE = -10V
hfe
Small Signal Current Gain
f = 1.0KHz
hoe
Output Admittance
NF
Noise Figure
rb’CC
Collector Base Time Constant
f = 100MHz
VCB = -10V
250
IE = 0
6.0
pF
8.0
pF
6.0
kΩ
10
x 10-4
50
300
—
4.0
40
µhmos
6
dB
250
ps
f = 1.0MHz
VEB = -1.0V
IC = 0
f = 1.0MHz
1.0
IC = -1.0mA
VCE = -5V
IC = -100µA
f = 100Hz
RS = -1kΩ
VCE = -20V
IC = -100mA
f = 131.8MHz
MHz
SWITCHING CHARACTERISTICS
td
Delay Time
VCC = -3V
VBE = 0.5V
35
tr
Rise Time
IC = -10mA
IB1 = -1mA
35
ts
Storage Time
VCC = -3V
IC = -10mA
175
tf
Fall Time
IB1 = IB1 = -1mA
ns
50
Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed
to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use.
Semelab encourages customers to verify that datasheets are current before placing orders.
Semelab plc.
Telephone +44(0)1455 556565. Fax +44(0)1455 552612.
E-mail: [email protected]
Website: http://www.semelab.co.uk
Document Number 2539
Issue 2