2N2894ACSM HIGH SPEED, MEDIUM POWER, PNP GENERAL PURPOSE TRANSISTOR IN A HERMETICALLY SEALED CERAMIC SURFACE MOUNT PACKAGE FOR HIGH RELIABILITY APPLICATIONS MECHANICAL DATA Dimensions in mm (inches) FEATURES 0.31 rad. (0.012) • SILICON PLANAR EPITAXIAL PNP TRANSISTOR 3 2 • HERMETIC CERAMIC SURFACE MOUNT PACKAGE (SOT23 COMPATIBLE) 0.76 ± 0.15 (0.03 ± 0.006) 2.54 ± 0.13 (0.10 ± 0.005) 0.51 ± 0.10 (0.02 ± 0.004) 1 1.91 ± 0.10 (0.075 ± 0.004) • SCREENING OPTIONS AVAILABLE • HIGH SPEED, LOW SATURATION SWITCH A 0.31 rad. (0.012) 3.05 ± 0.13 (0.12 ± 0.005) A= 1.40 (0.055) max. 1.02 ± 0.10 (0.04 ± 0.004) APPLICATIONS: SOT23 CERAMIC (LCC1 PACKAGE) Underside View PAD 1 – Base PAD 2 – Emitter PAD 3 – Collector Hermetically sealed surface mount version of the popular 2N2894A for high reliability applications requiring small size and low weight devices. ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise stated) VCBO Collector – Base Voltage -12V VCEO Collector – Emitter Voltage -12V VEBO Emitter – Base Voltage -4.5V IC Collector Current PD Total Device Dissipation 200mA @ TA =25°C Derate above 25°C TSTG , TJ Operating and Storage Temperature Range 360mW 2.06mW / °C –65 to +150°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 4078 Issue 4 2N2894ACSM ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise stated) Parameter Test Conditions Min. Typ. Max. Unit V(BR)CBO* Collector – Base Breakdown Voltage IC = 10μA IE = 0 – 12 V(BR)CEO Collector – Emitter Breakdown Voltage IC = 10mA IB = 0 – 12 V(BR)EBO Emitter – Base Breakdown Voltage IE = 100μA IC = 0 – 4.5 ICBO Collector Cut-off Current VCB = –10V Tamb = 125°C – 10 μA ICES Collector Cut-off Current VBE = 0 VCE = –10V – 50 nA IC = –10mA IB = –1mA –0.13 IC = –30mA IB = –3mA –0.19 IC = –100mA IB = –10mA – 0.45 IC = –10mA IB = –1mA –0.78 –0.92 IC = –30mA IB = –3mA –0.85 –1.15 IC = –100mA IB = –10mA IC = –10mA VCE = –0.3V 30 IC = –30mA VCE = –0.5V 40 IC = –100mA VCE = –1V 30 IC = –30mA VCE = –0.5V VCE(sat) VBE(sat) hFE Collector – Emitter Saturation Voltage Base – Emitter On Voltage DC Current Gain Tamb = -55°C fT Current Gain Bandwidth Product Cibo Emitter – Base – Capacitance Cobo Collector – Base – Capacitance ton Turn on Time toff Turn off Time VCE = –10V f = 100MHz IC = –30mA VEB = –0.5V IC = 0 f = 1.0MHz VCB = –5V IE = 0 f = 1.0MHz IC = –30mA VCE = –2V IB2 = –1.5mA IC = –30mA VCE = –2V IB1 = IB2= –1.5mA V V V –1.5 150 –— 20 700 MHz 6 pF 4.5 pF 60 ns 60 ns * Pulse Test: tp ≤ 300μs, δ ≤ 2%. Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 4078 Issue 4