2N4910X 2N4911X 2N4912X MECHANICAL DATA Dimensions in mm (inches) NPN EPITAXIAL POWER TRANSISTOR IN TO66 HERMETIC PACKAGE 6.35 (0.250) 8.64 (0.340) 3.68 (0.145) rad. max. 3.61 (0.142) 4.08(0.161) rad. FEATURES 11.94 (0.470) 12.70 (0.500) 0.71 (0.028) 0.86 (0.034) 2 1 14.48 (0.570) 14.99 (0.590) 24.13 (0.95) 24.63 (0.97) • LOW SATURATION VOTAGE • HERMETIC METAL PACKAGE • CECC SCREENING OPTIONS • SPACE QUALITY LEVELS OPTIONS • JAN LEVEL SCREENING OPTIONS 1.27 (0.050) 1.91 (0.750) 4.83 (0.190) 5.33 (0.210) 9.14 (0.360) min. APPLICATIONS • Driver Circuits • Switching • Amplifiers TO–66 (TO-213AA) Metal Package PIN 1 = BASE PIN 2 = EMITTER CASE = COLLECTOR ABSOLUTE MAXIMUM RATINGS V(BR)CBO V(BR)CEO V(BR)EBO IC IB PD TC Tstg RθJC (Tcase = 25°C unless otherwise stated) 2N4910X 2N4911X 2N4912X Collector – Base Breakdown Voltage 40V 60V 80V Collector – Emitter Breakdown Voltage 40V 60V 80V Emitter – Base Breakdown Voltage 5V Continuous Collector Current 1A Base Current 1A Total Power Dissipation 25W Operating Case Temperature Range –65 to +200°C Storage Temperature Range –65 to +200°C Thermal Resistance , Junction To Case 7.0°C/W Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 3933 Issue 1 2N4910X 2N4911X 2N4912X Electrical Characteristics (TC = 25°C unless otherwise stated.) Parameter ICEO Collector – Emitter Cut-off Current ICEX Collector – Emitter Cut-off Current ICBO Collector – Base Cut-off Current ICES Collector – Emitter Leakage Current VCE(sat)* Collector – Emitter Saturation Voltage Test Conditions Min. Typ. Max. Units VCE = 40V IB = 0 0.50 mA VCE = V(BR)CEO VBE = 1.5V 100 µA TC = 150°C 1.0 mA VCB = V(BR)CBO IE = 0 0.1 mA VCE = V(BR)CEO VBE = 0 100 µA IC = 1A IB = 0.1A 0.60 V VBE(sat)* Base – Emitter Saturation Voltage IC = 1A IB = 0.1A 1.3V V VBE* Base – Emitter Voltage IC = 1A VCE = 1V 1.3V V VCE = 1V IC = 50mA 40 VCE = 1V IC = 500mA 20 175 — VCE = 1V IC = 1A 10 hFE* DC Current Gain * Pulse Test: tp = 300µs, δ = 2%. Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 3933 Issue 1