2N5096 MECHANICAL DATA Dimensions in mm (inches) HIGH VOLTAGE PNP TRANSISTOR 8.51 (0.34) 9.40 (0.37) 7.75 (0.305) 8.51 (0.335) 6.10 (0.240) 6.60 (0.260) 38.00 (1.5) min. FEATURES 0.89 max. (0.035) • LOW SATURATION VOLTAGE 0.41 (0.016) 0.53 (0.021) dia. • LOW LEAKAGE AT HIGH TEMPERATURE • CECC SCREENING OPTIONS 5.08 (0.200) typ. 2.54 (0.100) 2 1 • SPACE QUALITY LEVELS OPTIONS • JAN LEVEL SCREENING OPTIONS 3 0.74 (0.029) 1.14 (0.045) 0.71 (0.028) 0.86 (0.034) 45° TO-5 (TO-205AA) PIN 1 – Emitter Underside View PIN 2 – Base PIN 3 – Collector ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VCER Collector-Base Voltage (RBE = 1K ) VCEO VCBO IC IB Ptot Collector-Emitter Voltage (IB = 0V) Collector Base Voltage (IE = 0V) Collector Current Base Current Total Dissipation @ Tamb = 25°C Derate Above 100°C Operating And Storage Junction Temperature Tj 500V 450V 500V 1A 0.5A 2W 20mW/°C -65 to 200°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 4058 Issue 1 2N5096 ELECTRICAL CHARACTERISTICS (Tcase = 25°C unless otherwise stated) Parameter BVCEO* BVCER* Test Conditions Collector Emitter Breakdown Voltage IC=50mA Min. Typ. Max. 450 RBE = 1K Collector Emitter Breakdown Voltage IC=100µA BVCBO Collector Base Breakdown Voltage IC=100µA BVEBO Emitter Base Breakdown Voltage IE=20µA 500 250 ICBO 500 V 500 6 Collector Cutoff Current VCB=500V IEBO Emitter Cutoff Current VEB=4V hFE* DC Current Gain IC=1mA VCE=10V 20 200 IC=25mA VCE=10V 40 250 IC=100mA VCE=15V 20 200 IB=2.5mA 3.0 1.0 VCE(SAT)* Unit Collector Emitter Saturation Voltage IC=25mA VBE(SAT)* Base Emitter Saturation Voltage IC=25mA IB=2.5mA fT Current Gain Bandwidth Product IC=10mA VCE =20V f=5MHz 20 nA V MHz SWITCHING TIMES (Tcase = 25°C unless otherwise stated) Parameter td Delay Time tr Rise Time ts Storage Time tf Fall Time Test Conditions VCC=150V IC=100mA IB1=IB2=10mA Min. Typ. Max. 700 1500 Unit ns 3 µS 200 ns * Pulsed: Pulse Duration = 300µs, duty cycle = 1.5% Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 4058 Issue 1