2N6193ALCC4 MECHANICAL DATA Dimensions in mm (inches) PNP SILICON TRANSISTORS 9.14 (0.360) 8.64 (0.340) 1.27 (0.050) 1.07 (0.040) ≈ 2.16 (0.085) 12 13 14 15 16 1.39 (0.055) 1.02 (0.040) 7.62 (0.300) 7.12 (0.280) 11 17 10 18 9 1 8 2 7 6 5 4 3 1.65 (0.065) 1.40 (0.055) 1.39 (0.055) 1.15 (0.045) 0.76 (0.030) 0.51 (0.020) 0.33 (0.013) Rad. 0.08 (0.003) 0.43 (0.017) 0.18 (0.007 Rad. FEATURES • Hermetically sealed ceramic surface mount package • Small footprint • Simple drive requirements LCC4 CERAMIC SURFACE MOUNT PACKAGE Underside View Pads 6, 7, 8, 9, 10, 11, 12, 13. Emitter Pads 4,5 Base Pads 1,2,15,16,17,18 Collector Pads 3,14 Not Connected ABSOLUTE MAXIMUM RATINGS TCASE = 25°c unless otherwise stated VCBO VCEO VEBO IC IB Ptot Collector – Base Voltage(IE = 0) Collector – Emitter Voltage (IB = 0) Emitter – Base Voltage (IC = 0) Collector Current Base Current Total Dissipation at Tamb ≤ 25°C derate above 25°C Ptot Total Dissipation at Tamb ≤ 25°C derate above 25°C Storage Temperature Range Junction temperature Tstg Tj 100V 100V 6V 5A 1A 1W 5.71mW/°C 10W 57.1mW/°C –55 to +200°C 200°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 5708 Issue: 1 2N6193ALCC4 ELECTRICAL CHARACTERISTICS (Tcase = 25°C unless otherwise stated) Parameter Test Conditions Min. V(BR)CEO Collector Emitter Breakdown Voltage IC = 50mA pulsed 100 ICBO Collector-Base Cut Off Current IE = 0 VCB = 100V 10 µA ICEX Collector-Emitter Cut Off Current VBE = 1.5V VCE = 90V 10 µA 1 mA ICEO Collector-Emitter Cut Off Current IB = 0 TA = 150°C VCE = 100V 100 µA IEBO Collector-Emitter Cut Off Current 100 µA mA VCE(sat) Collector Emitter Saturation Voltage VBE(sat) Base Emitter Voltage hFE DC Current Gain VEB = 6V |hfe| Signal Short circuit forward Current Transfer ratio. CIBO COBO 1.0 IC = 2A IB = 0.2A 0.7 IC = 5A IB = 0.5A 1.2 IC = 2A IB = 0.2A 1.2 IC = 5A IB = 0.5A 1.8 IC = 0.5A VCE = 2V 60 IC = 2A VCE = 2V 60 IC = 5A VCE = 2V 30 IC =2A VCE = 2V VCB = 5V IC = 0.5A f = 10MHz VCB = 10V Circuited 100kHz<f<1MHz VCB = 10V IE = 0 IE = 0 100kHz<f<1MHz V V 240 12 3.0 Unit V IC = 0 Input Capacitance, Output Open Open Circuit Output Capacitance Max. VEB = 5.5V TC = -55°C Magnitude of Common Emitter Small Typ. — 15 1250 pF 300 Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 5708 Issue: 1