SMLA42CSM SILICON NPN HIGH VOLTAGE TRANSISTOR IN CERAMIC SURFACE MOUNT PACKAGE MECHANICAL DATA Dimensions in mm (inches) 0.31 rad. (0.012) 3 2 0.76 ± 0.15 (0.03 ± 0.006) 2.54 ± 0.13 (0.10 ± 0.005) 0.51 ± 0.10 (0.02 ± 0.004) 1 1.91 ± 0.10 (0.075 ± 0.004) FEATURES 0.31 rad. (0.012) 3.05 ± 0.13 (0.12 ± 0.005) A= 1.02 ± 0.10 (0.04 ± 0.004) A 1.40 (0.055) max. • HIGH BREAKDOWN VOLTAGE • LOW SATURATION VOLTAGES • LOW CAPACITANCE • HERMETIC CERAMIC SURFACE MOUNT PACKAGE SOT23CSM (SOT23 COMPATIBLE) SOT23 CERAMIC (LCC1 PACKAGE) Underside View PAD 1 – Base PAD 2 – Emitter PAD 3 – Collector ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VCBO Collector – Base Voltage 300V VCEO Collector – Emitter Voltage 300V VEBO Emitter – Base Voltage IC Collector Current 500mA PD Total Device Dissipation 350mW Derate Above 25°C Tj Maximum Junction Temperature Tstg Storage Temperature Range 6V 2.0mW/°C 200°C –55 to 200°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 5668 Issue: 2 SMLA42CSM ELECTRICAL CHARACTERISTICS (Tcase = 25°C unless otherwise stated) Parameter V(BR)CBO V(BR)CEO V(BR)EBO Collector - Base breakdown voltage Collector - Emitter breakdown voltage Emitter - Base breakdown voltage Test Conditions Min. Typ. Max. Unit IC = 100µA IE = 0 300 V IC = 1mA IB = 0* 300 V IE = 100µA IC = 0 6 V ICBO Collector cut-off current VCB = 200V IE = 0 0.1 µA IEBO Emitter cut-off current VEB = 6V IC = 0 0.1 µA IC = 20mA IB = 2mA 0.5 V IC = 20mA IB = 2mA 0.9 V IC = 1mA VCE = 10V* 25 IC = 10mA VCE = 10V* 40 IC = 30mA VCE = 10V* 40 IC = 10mA VCE = 20V VCE(sat) VBE(sat) hFE Collector - Emitter saturation voltage Base - Emitter saturation voltage DC Current gain fT Transition frequency Cob Output capacitance f = 20MHz VCB = 20V IE = 0 f = 1MHz — MHz 50 6 pF * Pulse test tp = 200µs , δ = 2% Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 5668 Issue: 2