BCY70 BCY71 BCY72 GENERAL PURPOSE PNP SILICON TRANSISTOR MECHANICAL DATA Dimensions in mm (inches) 5.84 (0.230) 5.31 (0.209) 12.7 (0.500) min. 5.33 (0.210) 4.32 (0.170) 4.95 (0.195) 4.52 (0.178) 0.48 (0.019) 0.41 (0.016) dia. DESCRIPTION The BCY70, BCY71 & BCY72 are silicon planar epitaxial PNP tranistors in Jedec TO18 metal case. 2.54 (0.100) Nom. 3 1 2 TO18 PACKAGE(TO-206AA) Underside View PIN 2 – Base PIN 3 – Collector PIN 1 – Emitter ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise stated) BCY70 BCY71 BCY72 VCBO Collector - Base Voltage (IE= 0) -50V -45V -25V VCEO Collector - Emitter Voltage(IB= 0) -40V -45V -25V VEBO Emitter - Base Voltage(IC= 0) ICM Collector Peak Current -200mA Ptot Total Power Dissipation @ Tamb < 25°C 350mW TJ , TSTG Operating and Storage Junction Temperature Range –5V –65 to +200°C THERMAL DATA Rth-j-Case Thermal Resistance Junction -case 150°C/W max Rth-j-amb Thermal Resistance Junction -ambient 500°C/W max Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 3297 Issue 1 BCY70 BCY71 BCY72 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise stated) Parameter Test Conditions VCE = -20V VCE = -50V ICES Collector Cut-off Current (VBE = 0) VCE = -20V VCE = -45V VCE = -20V VCE = -25V IEBO Emitter Cutoff Current (IC = 0) VCE(sat)* Collector – Emitter Saturation Voltage VBE(sat)* Base – Emitter Saturation Voltage Min. Typ. Max. Unit -10 BCY70 -500 BCY71 BCY72 VEB = -5V -100 nA -10 µA -100 nA -10 µA -10 µA IC = -10mA IB = -1mA -0.25 IC = -50mA IB = -5mA -0.5 IC = -10mA IB = -1mA BCY70 AND BCY71 ONLY IC = -50mA -0.6 -0.9 IB = -5mA nA V V -1.2 BCY70 IC = -0.1mA VCE = -1V 40 IC = -1mA VCE = -1V 45 IC = -10mA VCE = -1V 50 IC = -50mA VCE = -1V 15 BCY71 IC = -0.01mA VCE = -1V * hFE DC Current Gain 60 IC = -0.1mA VCE = -1V 80 IC = -1mA VCE = -1V 90 IC = -10mA VCE = 1V 100 IC = -50mA VCE = -1V 15 — 600 BCY72 hfe fT CEBO CCBO Small Signal Current Transition Frequency Emitter-Base Capacitance Collector-Base Capacitance IC = -1mA VCE = - 1V 40 IC = -10mA VCE = -1V 50 IC = -1mA VCE = -10V f = 1KHz 100 IC = -0.1mA VCE = -20V f = 10.7MHz BCY71 IC = -10mA VCE = -20V f = 100MHz BCY70 250 BCY71 and BCY72 200 IC = 0 VEB = -1V f = 1MHz IE = 0 VCB = -10V f = 1MHz 400 — 15 MHz 8 pF 6 Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 3297 Issue 1 BCY70 BCY71 BCY72 ELECTRICAL CHARACTERISTICS continued (TA = 25°C unless otherwise stated) Parameter Test Conditions IC = -0.1mA Min. Typ. Max. Unit VCE = -5V Rg = 2KΩ NF Noise Figure hie Input Impedance hre Reverse Voltage Ratio hoe td Output Admittance Delay Time f = 10 to 10000 Hz dB BCY70 AND BCY71 6 BCY70 2 IC = -1mA VCE = -10V f = 1kHz BCY71 ONLY IC = -1mA VCE = -10V f = 1kHz BCY71 ONLY IC = -1mA VCE = -10V f = 1kHz BCY71 ONLY IC = -10mA VEE = 3V IB1 = -1mA 12 KΩ 20 x 10-4 — 60 µS 23 35 ns 25 35 ns 270 350 ns 50 80 ns 48 65 ns 320 420 ns 2 10 BCY70 AND BCY72 ONLY IC = -10mA tr Rise Time VEE = 3V IB1 = -1mA BCY70 AND BCY72 ONLY IC = -10mA ts Storage Time VEE = 3V IB1 = -IB2 = -1mA BCY70 AND BCY72 ONLY IC = -10mA tf Fall Time VEE = 3V IB1 = -IB2 = -1mA BCY70 AND BCY72 ONLY IC = -10mA ton Turn-on Time VEE = 3V IB1 = -1mA BCY70 AND BCY72 ONLY IC = -10mA toff Turn-Off Time VEE = 3V IB1 = -IB2 = -1mA BCY70 AND BCY72 ONLY NOTES: * Pulse test: tp ≤ 300µs , δ ≤ 1% Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 3297 Issue 1